Water Pump Impeller Repair Kit – Fits Honda 6/7.5/8 HP Outboards (Replaces 06192-881-C00)

Water Pump Impeller Repair Kit – Fits Honda 6/7.5/8 HP Outboards (Replaces 06192-881-C00)

This water pump impeller repair kit is designed for specific 4-stroke Honda outboard motors, including 6 HP, 7.5 HP, and 8 HP models manufactured from pre-1997 through 2006. It provides the essential components needed to restore your engine's cooling system to optimal condition.

This kit is a direct replacement for Honda OEM part number 06192-881-C00 and Sierra Marine part number 18-3279.

• Engineered as a direct OEM-spec replacement for a precise fit and hassle-free installation.
• The impeller is crafted from high-performance, marine-grade neoprene rubber for durability and reliable performance.
• Provides a comprehensive solution, including a new impeller, gaskets, and seal to complete the service.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Water Pump Impeller (Replaces 19210-881-003, 19210-881-A01, 19210-881-A02)
• 2 x Gasket (Replaces 19232-881-850)
• 1 x Seal (Replaces 91252-935-004)

Explosion Diagram

Installation Guide

1. Safety First: Disconnect the engine's battery before beginning work.
2. Access the Pump: Unbolt and carefully remove the lower unit (gearcase) from the outboard's main leg.
3. Disassemble Housing: Locate the water pump housing on top of the gearcase. Remove the bolts to lift the cover off.
4. Inspect and Remove: Note the rotational direction of the old impeller's vanes. Remove the old impeller, gaskets, and seals.
5. Clean Surfaces: Thoroughly clean all mating surfaces, removing any old gasket residue.
6. Install New Components: Lightly grease the interior of the housing. Install the new seal and gaskets from the kit.
7. Install Impeller: Slide the new impeller onto the driveshaft, ensuring the drive key is in place and the vanes are turned in the correct direction.
8. Reassemble Housing: Securely reinstall the pump housing cover, tightening bolts to the manufacturer's recommended torque.
9. Reinstall Lower Unit: Carefully guide the lower unit back into place, ensuring all shafts align, and bolt it securely.
10. Test Operation: Reconnect the battery. Start the engine using a water supply (flushing muffs or in water) and confirm a strong, steady stream from the telltale outlet.

Troubleshooting & FAQ

Q: How can I be sure this kit will fit my engine?

A: This kit fits specific Honda 4-stroke models: 7.5 HP (BF75) and 8 HP (BF8A) from pre-1997 to 2006. The most reliable method is to confirm your engine's original water pump kit part number is 06192-881-C00. Please review the 'Compatible Engine Models' table carefully.

Q: What are the common symptoms of a bad water pump impeller?

A: The most common failure signs are a weak or non-existent water stream from the engine's tell-tale outlet, and/or the engine overheating at idle or low speeds. Upon inspection, a worn impeller may appear cracked, brittle, or have broken/bent vanes.

Q: How often should I replace my water pump impeller?

A: For preventative maintenance, it is recommended to inspect the impeller annually and replace it every 1-2 years or every 100 operating hours, whichever comes first. This interval can be shorter if you frequently operate in sandy or silt-heavy water.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.