Water Pump Impeller Kit – Fits Jabsco, Volvo Penta, Yanmar, Johnson Pumps (Replaces Jabsco 1210-0001-P, 3085-0001)

Water Pump Impeller Kit – Fits Jabsco, Volvo Penta, Yanmar, Johnson Pumps

This flexible impeller kit is designed for a wide range of marine water cooling pumps, including those from Jabsco, Johnson, Volvo Penta, Yanmar, and other inboard engines. It serves as a direct replacement for Jabsco part number 1210-0001-P and similar models, featuring a 12-blade design with a spline drive configuration for reliable performance.

Engineered for durability, the neoprene impeller is suitable for use in both fresh water and sea water, providing efficient water pumping for engine cooling systems. This kit ensures a proper fit and function, restoring your cooling system's performance and reliability.

• Direct Replacement: Installs directly into compatible pump housings without modifications.
• Durable Material: Made from high-quality neoprene rubber with a brass insert for corrosion resistance and long service life.
• Complete Kit: Includes the impeller, O-ring, and necessary gaskets for a comprehensive service.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Confirm your engine model/year in the table below.

Volvo Penta Applications

Yanmar Applications

Jabsco Pump Applications

Northern Lights Applications

Technical Specifications

Package Contents

• 1 x Impeller (Jabsco 1210-0001)
• 1 x O-Ring
• 4 x Gaskets

Installation Guide

1. Ensure the engine is off and the sea cock is closed to prevent water from entering the vessel.
2. Locate the raw water pump housing on your engine. You may need to remove other components for access.
3. Unscrew the bolts holding the pump's faceplate cover. Keep the screws in a safe place.
4. Gently pry off the cover. Be prepared for some residual water to spill out.
5. Using impeller pullers or two pliers, carefully grip the hub of the old impeller and pull it straight out of the housing.
6. Clean the inside of the pump housing thoroughly, removing any old gasket material, debris, or broken impeller blades.
7. Inspect the housing for scoring or wear. Significant damage may require pump replacement.
8. Lubricate the new impeller and the inside of the housing with a water-based lubricant or glycerine. Do not use petroleum-based grease.
9. Insert the new impeller by pushing it in while rotating the shaft in its normal direction of operation to bend the blades correctly.
10. Place the new gasket or O-ring onto the faceplate or housing.
11. Re-install the faceplate cover and tighten the screws evenly in a star pattern.
12. Open the sea cock, start the engine, and immediately check for proper water flow and for any leaks around the pump cover.

Troubleshooting & FAQ

Q: How do I confirm this impeller fits my engine?

A: The most reliable method is to match your existing impeller's part number to one listed in our "Part Number Cross-Reference" table. You should also compare the dimensions (Diameter: 57mm, Width: 31.5mm, Shaft: 16mm) and drive type (Spline Drive) with your old part.

Q: How often should I replace the water pump impeller?

A: We recommend replacing your impeller annually as part of routine maintenance. However, if your engine is used heavily or operates in water with high sediment levels, you may need to replace it sooner.

Q: What are the common signs of a failing impeller?

A: Key indicators include the engine running hotter than normal, a noticeable reduction in water flow from the exhaust outlet, and visible cracks or stiffness in the impeller blades during inspection. In severe cases, a failed impeller can cause rapid overheating.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.