Water Pump Impeller Kit – Fits Suzuki DF8A, DF9.9A, DF9.9B, DF15A, DF20A
This water pump impeller repair kit is designed for Suzuki 4-Stroke outboard motors from 8 HP to 20 HP, including models DF8A, DF9.9A, DF9.9B, DF15A, and DF20A manufactured between 2010 and 2021.
It serves as a direct replacement for Suzuki OEM part numbers 17400-99840, 17400-99841, 17400-99J00, 17400-99J01, and 17400-99J20, ensuring a precise fit and reliable performance.
- Engineered with corrosion-resistant materials for enhanced durability and longevity.
- Comes with the essential components needed for a complete water pump service.
- Designed for a direct fit, simplifying the installation process.
Part Number Cross-Reference
Use this table to confirm equivalent part numbers.
Brand |
Part Number |
Superseded By |
Suzuki |
17400-99840 |
17400-99J20 |
Suzuki |
17400-99841 |
17400-99J20 |
Compatible Engine Models
Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.
Brand |
Model |
Rated HP |
Stroke |
Years |
OEM Part No. |
Notes |
Suzuki |
DF8A |
8 |
4-Stroke |
2010–2011 |
17400-99840/99841 |
Superseded by 17400-99J20 |
Suzuki |
DF9.9A |
9.9 |
4-Stroke |
2010–2016 |
17400-99840/99841 |
Superseded by 17400-99J20 |
Suzuki |
DF9.9B |
9.9 |
4-Stroke |
2014–2021 |
17400-99J20 |
|
Suzuki |
DF15A |
15 |
4-Stroke |
2013–2021 |
17400-99J20 |
|
Suzuki |
DF20A |
20 |
4-Stroke |
2013–2020 |
17400-99J20 |
|
Technical Specifications
Specification |
Value |
Product Type |
Water Pump Impeller Kit |
Installation |
Direct Fit |
Other Technical Attributes |
Corrosion-resistant materials |
Package Contents
- 1 x Impeller
- 1 x Pump Plate
- 1 x Pump Case Sleeve (17413-94J00)
- 1 x Pump Plate Gasket (09168-12017)
- 1 x Key (09204-02004)
Installation Guide
-
Safety First: Disconnect the battery and shift the outboard into neutral. Place the lower unit in a suitable stand or on a workbench.
-
Access the Pump: Remove the bolts securing the lower unit (gearcase). Carefully separate it from the upper engine housing.
-
Disassemble Housing: Unscrew the bolts on the water pump housing. Lift the housing to expose the impeller.
-
Remove Old Components: Take out the old impeller, wear plate, gaskets, and key. Note the orientation of the impeller vanes.
-
Clean Surfaces: Thoroughly clean the driveshaft and all mating surfaces where gaskets and plates will sit. Remove any old sealant or corrosion.
-
Install New Parts: Place the new pump plate gasket and plate over the driveshaft. Slide the new key into the driveshaft slot.
-
Install Impeller: Lubricate the new impeller with a bit of soapy water or marine grease. Slide it onto the shaft while turning the shaft clockwise to bend the vanes correctly.
-
Reassemble Housing: Install the new pump case sleeve and reinstall the housing. Securely tighten the bolts to the manufacturer-specified torque.
-
Reattach Lower Unit: Guide the lower unit back into place, ensuring the driveshaft, shift shaft, and water tube align. Bolt it securely.
-
Test Operation: Reconnect the battery. Start the engine in a test tank or with a water flusher, and verify a strong, consistent stream of water from the tell-tale outlet.
Troubleshooting & FAQ
How do I confirm this fits my Suzuki engine?
Check the "Compatible Engine Models" table on this page. Match your Suzuki engine model (e.g., DF9.9B), rated horsepower, and year range to ensure a correct fit. Comparing the part numbers listed to your engine's service manual is also a reliable method.
What are the signs my water pump impeller needs replacing?
A weak, inconsistent, or completely absent water stream from the engine's tell-tale outlet is the most common sign. An engine overheating alarm or abnormally high temperature reading also indicates a potential cooling system issue, often linked to a failed impeller.
How often should the impeller be replaced?
As a preventative maintenance measure, it is recommended to inspect the impeller annually and replace it every 1-3 years. If you frequently operate in sandy, silty, or saltwater environments, more frequent replacement (every year) is advised to prevent unexpected failure.
My original part number is 17400-99841. Will this kit work?
Yes. This kit is the current, updated replacement for older versions, including 17400-99841 and 17400-99840. The "Part Number Cross-Reference" table confirms this supersession.
OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.
How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.
What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.
Important Notes
- Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
- This product is an aftermarket replacement part and is not an OEM component.
- Professional installation is recommended to ensure safety and optimal performance.
Why Choose JLM MARINE?
-
Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
-
Fast Global Shipping: Free delivery worldwide in 5–15 days.
-
Direct from Manufacturer: Competitive pricing without compromising quality.