6H3-W0093-01/00 Carburetor Kit for Yamaha P60 E60 C60 | JLM Marine

Carburetor Repair Kit – Fits Yamaha 60-70 HP 3-Cylinder Outboards

This comprehensive carburetor repair kit is designed for Yamaha 3-cylinder outboard engines rated 60–70 HP, covering models from 1984 through 2000. It includes all necessary components to service three carburetors, making it ideal for complete carburetor rebuilds on compatible P60, C60, E60, and 70 HP models.

This aftermarket kit directly replaces Yamaha OEM part numbers 6H3-W0093-01-00, 6H3-W0093-00-00, and 6H3-W0093-02-00, as well as Sierra 18-7766 and Mallory Marine 9-37502. It provides a cost-effective solution for restoring proper fuel delivery and carburetor function.

• Complete rebuild kit with parts for three carburetors
• Includes gaskets, needle valves, floats, O-rings, and adjustment screws
• Compatible with Yamaha 60-70 HP 3-cylinder outboard engines (1984–2000)

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This kit includes parts for three carburetors. Complete component list:

Installation Guide

1. Preparation: Disconnect the fuel line and remove the carburetor assembly from the engine. Clean the exterior thoroughly before disassembly.
2. Disassemble Carburetor: Remove the float bowl by unscrewing the mounting screws. Carefully note the position of all components for reassembly.
3. Remove Old Components: Take out the old float, needle valve assembly, pins, and gaskets. Inspect the carburetor body for wear or damage.
4. Clean Thoroughly: Use carburetor cleaner to remove all deposits from passages, jets, and mounting surfaces. Blow out all passages with compressed air.
5. Install New Gaskets: Place the new gaskets on clean, dry surfaces. Do not reuse old gaskets.
6. Install Float Components: Insert the new float pin and attach the new float with the float arm pin.
7. Install Needle Valve: Install the new needle valve assembly into the seat. Ensure the clip is properly secured.
8. Install O-Rings: Replace all O-rings to ensure proper sealing.
9. Adjust Pilot Screw: Install the new pilot screw and turn it in gently until seated, then back out 1.5 turns as a starting point.
10. Reassemble Float Bowl: Install the cap and secure the float bowl using the screws with washers. Tighten evenly in a cross pattern.
11. Repeat for All Carburetors: Perform the same rebuild procedure on all three carburetors.
12. Reinstall and Test: Mount the carburetors back on the engine, reconnect fuel lines, and perform initial adjustments.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my Yamaha outboard?
A: Verify your engine model and year against the compatibility table above. Cross-reference your current carburetor kit part number to ensure proper fitment.

Q: How often should I rebuild my carburetors?
A: Carburetor rebuild intervals depend on usage and fuel quality. Typical signs that rebuilding is needed include rough idle, poor acceleration, fuel leaks, or difficulty starting.

Q: What are common symptoms of carburetor problems?
A: Watch for hard starting, engine stalling at idle, inconsistent RPM, black smoke from exhaust, fuel leaking from carburetor bowls, or poor throttle response.

Q: Can I rebuild just one carburetor instead of all three?
A: While possible, it's recommended to rebuild all three carburetors simultaneously to ensure balanced fuel delivery across all cylinders.

Q: Do I need any special tools for installation?
A: Basic hand tools are sufficient. Carburetor cleaner, compressed air, and a clean workspace are essential.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part built to OEM specifications using comparable-grade materials.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use.

Important Notes

• Verify that the product images and specifications match your original part.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.