SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Force, Honda, Nissan/Tohatsu

SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Force, Honda, Nissan/Tohatsu (27071)

This replacement skeg guard is designed to fit a wide range of outboard motors, including specific models from Mercury/Mariner (40–125 HP, 1983–2016), Honda (60–115 HP, 1995–Present), Force (70–90 HP, 1998–2002), Nissan/Tohatsu (70–140 HP, 1993–Present), and Yamaha (60–100 HP, 1998–2001). It provides a durable, cost-effective solution for repairing a broken skeg or protecting a new one from damage.

It serves as a direct replacement for Megaware SkegGuard 27071 and is a compatible alternative to the Gator Guards SkegShield.

• Installation Method: Bolt-on (DIY install in under 10 minutes)
• Material: Polished 316 Marine Grade Stainless Steel
• Included Hardware: Self-locking bolts and Loctite provided

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Confirm your engine model/year in the table below.

Mercury/Mariner

Honda

Force

Nissan/Tohatsu

Yamaha

Technical Specifications

Package Contents

• 1 x SkegGuard 27071 Stainless Steel Replacement Skeg
• 1 x Hardware Kit (Bolts, Loctite)
• 1 x Installation Instructions

Installation Guide

This is a bolt-on, do-it-yourself installation that typically takes less than 10 minutes. A minimum of 2-3 inches (51-76 mm) of the original skeg is required to mount the SkegGuard.

1. Ensure the engine is off and the drive is tilted into a raised position for safe access.
2. Thoroughly clean the remaining portion of the skeg, removing any marine growth, dirt, or debris.
3. Slide the SkegGuard over the skeg. Check for a snug fit. If the skeg is bent, it may need to be straightened first.
4. With the SkegGuard in place, use the pre-drilled holes in the guard as a template to mark drilling locations on the skeg.
5. Remove the SkegGuard and carefully drill through the skeg using the marks as a guide.
6. Apply a small amount of the included Loctite to the threads of each mounting bolt.
7. Position the SkegGuard back onto the skeg, align the holes, and insert the bolts.
8. Tighten the self-locking nuts and bolts securely. Do not overtighten, as this can damage the skeg.
9. Once installed, confirm the SkegGuard is rigid and does not move.

Troubleshooting & FAQ

Q: How much of my original skeg needs to be left for installation?
A: You need at least 2-3 inches (51-76 mm) of your original skeg remaining to properly drill and mount the SkegGuard.

Q: Can I install this to protect a new or undamaged skeg?
A: Yes, the SkegGuard is designed to work on both broken skegs and new/intact skegs, providing excellent protection against future damage from rocks, ramps, and debris.

Q: How does the skeg guard prevent water damage and corrosion?
A: It features a built-in drain hole that allows water to escape, preventing it from collecting inside and causing corrosion or damage from freezing in cold climates.

Q: What tools are required for installation?
A: Installation requires common hand tools, including a drill and wrenches to tighten the bolts. The necessary self-locking hardware is included.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 3-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.