Red Rams Sticker Set – Fits Mercruiser Bravo One (Replaces 37-15167A90)

Red Rams Sticker Set – Fits Mercruiser Bravo One (Replaces 37-15167A90)

The Red Rams Sticker Set is engineered for Mercruiser Bravo One Blue sterndrive systems. It offers broad compatibility with high-performance applications, including Mercury Racing models from 520 to 600 HP and Mercruiser Bravo One sterndrives manufactured from 1986 to the present, with specific fitment determined by serial number.

This set is a direct aftermarket replacement for Mercury Marine part numbers 37-15167A90 and 15167A90. It also replaces the superseded parts 37-15167A88 and 37-17907A88.

• Complete Restoration Kit: Includes a full set of decals to completely refresh your Bravo One drive unit's appearance.
• Durable Construction: Made from marine-grade vinyl with a protective UV laminate to resist sun exposure, salt water, and fuel.
• Precision-Cut Fit: All decals are cut to exact specifications for perfect fitment and a professional look.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Complete Red Rams Decal Set (37-15167A90)
• 1 x Mercury Logo Decal (Included)
• 1 x MerCruiser Logo Decal (Included)
• 1 x SmartCraft Logo Decal (Included)
• 1 x Power Trim XD Decals (2 pieces, Included)
• 1 x Installation Instructions (Included)

Installation Guide

1. Thoroughly clean all application surfaces with a marine-grade degreaser like isopropyl alcohol (70%) to remove contaminants.
2. Ensure the surface temperature is between 15°C and 32°C (59°F to 90°F) and ambient humidity is below 85% for optimal adhesion.
3. For larger decals, use the wet application method. Lightly spray a soapy water solution (2-3 drops of soap per quart of water) on the surface and the decal's adhesive side.
4. Position the decal on the surface; the solution allows for repositioning.
5. Use a felt-edge squeegee to work from the center outward, pressing out the water and any air bubbles.
6. For smaller decals, the dry application method can be used, but requires more precise initial positioning.
7. Press down firmly from the center out with a squeegee to ensure full adhesive contact.
8. Allow the adhesive to cure for 24-48 hours before exposing the vessel to water.

Troubleshooting & FAQ

How do I confirm this sticker set fits my engine?
Verify your engine's serial number against the compatibility table. For Mercruiser/Mercury engines, the serial number plate is typically on the engine block or sterndrive housing. We provide a link to the official Mercury Serial Number Guide on this page to help you locate and interpret it.

Will the red color perfectly match my existing old decals?
Due to UV exposure and weathering over time, your original decals may have faded. A new set may appear brighter or slightly different in shade. For a perfect aesthetic match, it is always recommended to replace all related decals on the drive at the same time.

What should I do if I get air bubbles under the decal during installation?
Small air bubbles can typically be removed by piercing them with a fine needle and using a squeegee to gently press the trapped air out through the hole. Using the wet application method is the best way to prevent bubbles from forming in the first place.

How do I care for the decals to keep them from fading?
Regularly wash the decals with a mild soap and water solution. To maximize their life and preserve the color, apply a marine-grade UV protectant designed for vinyl graphics at least once a year. Avoid using harsh abrasive cleaners, high-pressure washers, or petroleum-based solvents.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.