Customer Service: info@jlm-marine.com
Free shipping. No Minimum Purchase
OEM and aftermarket replacement parts for Mercury 650 (3 CYL.). Scroll down for exploded parts diagrams (17), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 650 (3 CYL.) Reference Library — Exploded parts diagrams (17 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 650 (3 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 65 HP |
| Displacement | 2100 cc |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 5.2 L (5.5 quart) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | 650 ± 25 RPM (in gear) |
| Full Throttle RPM Range | 4500-5500 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 650 (3 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 650 (3 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 812953 | REPAIR PARTS KIT (LONG SHAFT) |
| 1 | 1379-6071A9 | CARBURETOR ASSEMBLY, COMPLETE (LONG SHAFT) |
| 2 | 1395-6359 | JET, VENT BOWL (.052) LONG SHAFT |
| 3 | 1395-83181 | INLET NEEDLE AND SEAT |
| 5 | 1395-6685 | VENTURI ASSEMBLY |
| 11 | 19273 | FLOAT |
| 12 | 1395-6206 | FUEL BOWL |
| 15 | 1395-6199 | PLUG, MAIN JET |
| 16 | 1395-6202 | JET, MAIN (.088)-LONG SHAFT |
| 20 | 1395-4807 | SHAFT, THROTTLE |
| 21 | 1395-6196 | VALVE, THROTTLE |
| 23 | 1395-6204 | SEAL, THROTTLE SHAFT |
| 24 | 1395-6203 | WASHER, THROTTLE SHAFT |
| 26 | 1395-6198 | VALVE ASSEMBLY, ENRICHMENT |
| 29 | 27-733771 | GASKET, CARBURETORO |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 60549A7 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, HARNESS LEAD TO CHOKE SOLENOID |
| 3 | 11-68219 | NUT, HARNESS LEAD TO SOLENOID ATTACHING |
| 4 | 10-33524 | SCREW, CHOKE SOLENOID ATTACHING (5/8") |
| 5 | 11-29250 | NUT, CHOKE SOLENOID ATTACHING SCREWS |
| 6 | 89008A2 | PLUNGER ASSEMBLY, CHOKE SOLENOID |
| 7 | 76076A1 | CHOKE ROD |
| 8 | 90242A1 | CHOKE KNOB ASSEMBLY |
| 9 | 10-77137 | SCREW, WIRE TO CHOKE KNOB |
| 10 | 25-20116 | GROMMET, CHOKE KNOB |
| 13 | 1379-6071A9 | CARBURETOR ASSEMBLY (LONG SHAFT) |
| 14 | 10-52743 | SCREW, CARBURETOR TO CRANKCASE (3 3/4") |
| 15 | 60568 | LEVER, THROTTLE |
| 16 | 10-60293 | SCERW, LEVER TO CARBURETOR |
| 17 | 60292A1 | COUPLING ASSEMBLY |
| 18 | 28-89694 | INSERT, THROTTLE SHAFT COUPLING |
| 19 | 11-92500 | WASHER, ROLLED COUPLING |
| 20 | 10-60293 | SCREW, ROLLED WASHER TO COUPING |
| 21 | 76904A1 | PLATE ASSEMBLY, CARBURETOR |
| 22 | 71090 | SEAL, CARBURETOR PLATE |
| 23 | 27-73398 | GASKET, CARBURETOR PLATE |
| 24 | 27-76952 | GASKET, CARBURETOR PLATE TO CARBURETOR |
| 25 | 10-20367 | SCREW, PLATE TO CARBURETOR (7/16") |
| 26 | 12-8M0204649 | WASHER, PLATE SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY |
| 3 | 75043 | CAP, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT-CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC -TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET (9 1/2") |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 13 | 32-28052 | SLEEVE, RUBBER-TILT LOCK PIN BUMPER |
| 14 | 10-68299 | BOLT, CLAMP BRACKET TO BOAT TRANSOM (3") |
| 15 | 12-68300 | WASHER, CLAMP BRACKET BOLT |
| 16 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 17 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 18 | 1490-8599A6 | SWIVEL BRACKET ASSEMBLY (LONG SHAFT) |
| 19 | 26-32911 | OIL SEAL, SWIVEL BRACKET |
| 20 | 10-47828 | SCREW, DRIVE-SWIVEL BRACKET |
| 21 | 22-8M0169589 | FITTING, GREASE |
| 22 | 76386 | TILT LOCK ASSEMBLY, STARBOARD |
| 23 | 76385T | TILT LOCK ASSEMBLY, PORT |
| 24 | 47802 | TUBE, TILT LOCK |
| 25 | 18-47959 | COTTER PIN, TILT LOCK |
| 26 | 23-71574 | BUSHING, TILT LOCK TUBE |
| 27 | 13-69150 | WASHER, WAVE-TILT LOCK TUBE |
| 28 | 69540A2 | SWIVEL PIN AND STEERING ARM ASSEMBLY (LONG SHAFT) |
| 29 | 30711 | BUMPER, STEERING ARM |
| 30 | 10-66897 | BOLT, UPPER MOUNT TO SWIVEL PIN (7/16 X 5 1/4") |
| 31 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING |
| 32 | 12-26837 | WASHER, SWIVEL PIN TO BOTTOM YOKE (.065) |
| 33 | 77416T1 | YOKE, BOTTOM |
| 34 | 11-71956 | NUT, SWIVEL PIN RETAINING |
| 35 | 55-696531 | PIN, LOWER SHOCK MOUNTING |
| 36 | 87432 | REVERSE LOCK |
| 37 | 24-29821 | SPRING, REVERSE LOCK TENSION |
| 38 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 39 | 23-69132 | BUSHING, REVERSE PIVOT SHAFT |
| 40 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 41 | 23-73203 | SPACER, UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 42 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 43 | 55-58780A7 | SHOCK ABSORBER |
| 44 | 23-32171 | BUSHING, RUBBER-SHOCK ABSORBER (UPPER) |
| 45 | 23-28198 | BUSHING, RUBBER-SHOCK ABSORBER (LOWER) |
| 46 | 12-8M0204648 | WASHER, UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 47 | 10-69375A1 | SCREW, UPPER AND LOWER SHOCK MOUNTING PIN (3/4") |
| 48 | 70679 | COVER, UPPER AND LOWER SHOCK MOUNTING PIN |
| 49 | 10-37655 | SCREW, COVER TO SHOCK MOUNTING SCREWS (1/2") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 73641A1 | BRACKET, COWL SUPPORT-TOP |
| 2 | 62444 | SEAL, RUBBER-TOP BRACKET AND COVER MOUNTING PLATE |
| 3 | 79652 | CLIP, TOP COWL SUPPORT BRACKET |
| 4 | 10-48408 | SCREW, CLIP TO TOP COWL SUPPORT (1/2") |
| 5 | 12-45075 | WASHER, CLIP TO TOP COWL SUPPORT BRACKET |
| 6 | 79490 | SHIELD FLYWHEEL |
| 7 | 10-37656 | SCREW, SHIELD TO TOP SUPPORT BRACKET (5/8") |
| 8 | 10-48408 | SCREW, SHIELD TO TOP SUPPORT BRACKET (1/2") |
| 9 | 74510A2 | BRACKET, COWL SUPPORT-REAR |
| 10 | 698761 | SEAL, REAR BRACKET AND TOP BRACKET |
| 11 | 90435 | MOUNT, RUBBER-BRACE TO REAR SUPPORT BRACKET |
| 12 | 12-69057 | WASHER, RUBBER MOUNT TO REAT SUPPORT BRACKET |
| 13 | 11-826709109 | NUT, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 14 | 269011 | STOP, RUBBER-REAR SUPPORT BRACKET |
| 15 | 60116 | BRACE, REAR COWL SUPPORT BRACKET (TOP) |
| 16 | 10-24878 | SCREW, SUPPORT BRK. BRACE TO CYL. BLOCK COVER (1 3/8") |
| 17 | 90435 | MOUNT, RUBBER- FRONT SUPPORT BRACKET TO BRACKET |
| 18 | 12-69057 | WASHER, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 19 | 11-8267089 | NUT, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 20 | 71097 | BRACKET, RUBBER MOUNT |
| 21 | 10-39349 | SCREW, BRACKET TO CRANKCASE (3/4") |
| 22 | 79489 | ATTENUATOR, SOUND |
| 23 | 76218 | COVER, TOP-SOUND ATTENUATOR |
| 24 | 27-71096 | GASKET, TOP COVER |
| 25 | 10-37571 | SCREW, TOP COVER TO SOUND ATTENUATOR (1/2") |
| 26 | 12-8M0204666 | WASHER, TOP COVER SCREW |
| 27 | 75841 | COVER, MANUAL CHOKE |
| 28 | 10-37978 | SCREW, COVER TO TOP COVER |
| 29 | 12-8M0204666 | WASHER, COVER SCREW |
| 30 | 73986 | AIR MANIFOLD |
| 31 | 10-69093 | SCREW, AIR MANIFOLD TO SOUND ATTENUATOR |
| 32 | 12-8M0204649 | WASHER, AIR MANIFOLD SCREW |
| 34 | 90435 | MOUNT, RUBBER-FRONT SUPPORT TO STARTER MOTOR COVER |
| 36 | 12-69057 | WASHER, RUBBER MOUNT ATTACHING |
| 37 | 11-8267089 | NUT, RUBBER MOUNT ATTACHING |
| 38 | 76410 | SEAL, FUEL CONNECTOR-FRONT SUPPORT BRACKET |
| 39 | 21-428671 | CONNECTOR ASSEMBLY, ATTENUATOR |
| 40 | 32-9938779 | TUBE, VENT (LOWER) |
| 41 | 22-56759 | FITTING, CRANKCASE VENT (PRESS IN) |
| 42 | 72956 | COVER, SOUND ATTENUATOR (FRONT) |
| 43 | 27-76579 | GASKET, FRONT COVER |
| 45 | 10-37571 | SCREW, FRONT COVER TO SOUND ATTENUATOR (1/2") |
| 46 | 19-73336 | PLUG, FRONT COVER |
| 47 | 76251A1 | PLATE ASSEMBLY, FRONT COVER MOUNTING |
| 48 | 76264 | LATCH, FRONT COVER ATTACHING |
| 49 | 24-60295 | SPRING, FRONT COVER LATCH |
| 50 | 10-28635 | SCREW, COVER PLATE TO SUPPORT BRACKET (5/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2142-6228A1 | COWL ASSEMBLY (STARBOARD) |
| 2 | 26-60297 | SEAL, FUEL CONNECTOR-COWL |
| 3 | 2141-6227A1 | COWL ASSEMBLY (PORT) |
| 4 | 26-60298 | SEAL, CONTROL CABLES-COWL |
| 5 | 89717T | BRACKET, COWL SEALING-REAR |
| 6 | 698761 | SEAL, REAR BRACKET |
| 7 | 90980 | BRACKET, COWL HINGE |
| 8 | 10-75794 | SCREW, HINGE BRACKET TO REAR BRACKET- UPPER (1 1/8') |
| 8A | 75805 | CAP, HINGE BRACKET SCREW (UPPER) |
| 9 | 13-26992 | LOCKWASHER, HINGE BRACKET SCREW |
| 10 | 12-75806 | WASHER, HINGE BRACKET SCREW (UPPER) |
| 11 | 90979 | PIN, COWL HINGE |
| 12 | 10-28782 | SCREW, PIN TO COWL (7/8") |
| 13 | 13-8M0204647 | LOCKWASHER, PIN ATTACHING SCREW |
| 14 | 46785A5 | COWL LATCH ASSEMBLY |
| 15 | 62628 | BARREL, COWL LATCH |
| 16 | 10-31312 | SCREW, LATCH ASSEMBLY TO BARREL (7/8") |
| 17 | 15222 | BAR, ADJUSTMENT-COWL LATCH |
| 18 | 62629 | BARREL, COWL LATCH |
| 19 | 24-62624 | SPRING, TENSION-COWL LATCH |
| 20 | 12-30164 | WASHER, ADJUSTMENT BAR TO BARREL |
| 21 | 11-859124 | NUT, ADJUSTMENT BAR TO BARREL |
| 22 | 2143-7254A3 | COWL FRONT COVER ASSEMBLY |
| 23 | 795511 | BLANKET, SOUND ABSORBING-FRONT COVER |
| 24 | 61158T | HOOK, COWL FRONT COVER FASTENING |
| 25 | 10-69570 | SCREW, FASTENING HOOK TO COWL FRONT COVER (3/4") |
| 26 | 47341A11 | STARTER ROPE ASSEMBLY (FOR MANUAL STARTING ONLY) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 39-78811A12 | RING, PISTON (.015) |
| 1 | 462-8839A2 | CRANKSHAFT ASSEMBLY |
| 2 | 30-64424T | BEARING, BALL-LOWER AND UPPER |
| 3 | 15-22369A1 | SHIM, LOWER BEARING TO CRANKSHAFT |
| 4 | 60834A3 | CARRIER ASSEMBLY, "O"RING |
| 5 | 64254001 | "O" RING, CARRIER |
| 6 | 542-7509A3 | MAIN BEARING ASSEMBLY (VALVE TYPE) |
| 7 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 8 | 17-60282 | DOWEL PIN (STEPPED) |
| 9 | 17-65855 | DOWEL PIN, REED STOP |
| 10 | 34-66051A1 | REED SET, MATCHED-MAIN BEARING |
| 11 | 34-65946 | REED STOP |
| 12 | 10-77280 | SCREW, REED STOP MOUNTING (9/16") |
| 13 | 11-20110 | NUT, REED STOP MOUNTING SCREW |
| 14 | 10-45775 | SCREW, MAIN BEARING CLAMPING (9/16") |
| 15 | 11-45774 | NUT, MAIN BEARING SCREW CLAMPING |
| 16 | 26113T | RACE, OUTER (PAIR) |
| 17 | 53-26933 | RING, SNAP-OUTER RACE CLAMPING |
| 18 | 29-714221 | BEARING, NEEDLE |
| 19 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY (LONG SHAFT) |
| 20 | 53-857196 | LOCK RING, PISTON PIN |
| 21 | 39-78816A12 | RING, PISTON |
| 22 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 23 | 10-54803 | SCREW, CAP TO CONNECTING ROD (1 1/2") |
| 24 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 25 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 26 | 29-8M0214934 | BEARING, NEEDLE-PISTON PIN |
| 27 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 865-5890A3 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY (LONG SHAFT) |
| 2 | 27-60286 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 16-68201 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (2 1/4") |
| 4 | 17-43044 | DOWEL PIN, CRANKCASE TO CYLINDER BLOCK |
| 5 | 17-20323 | DOWEL PIN, CYLINDER BLOCK TO MAIN BEARING |
| 6 | 16-68203 | STUD, BLOCK TO DRIVE SHAFT HOUSING (4") |
| 7 | 16-68167 | STUD, BLOCK TO DRIVE SHAFT HSG. (2 9/16")-TRANSFER SIDE |
| 8 | 76975 | COVER, STARTER MOTOR TO CRANKCASE (BOTTOM) |
| 9 | 10-73657 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2") |
| 10 | 10-22698 | SCREW, STARTER MOTOR COVER TO CRANKCASE (1 3/4") |
| 11 | 79735A1 | COVER, STARTER MOTOR TO CRANKCASE (TOP) |
| 12 | 10-815549 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2") |
| 13 | 10-35385 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 3/4") |
| 14 | 10-73657 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 1/2") |
| 15 | 10-22039 | SCREW, CRANKCASE TO CYLINDER BLOCK (2 3/4") |
| 16 | 12-26020 | WASHER, CRANKCASE TO CYLINDER BLOCK SCREW |
| 17 | 11-29250 | NUT, CRANKCASE TO CYLINDER BLOCK SCREW (BOTTOM) |
| 18 | 73217 | INDICATOR, TIMING |
| 19 | 10-69022 | SCREW, INDICATOR TO STARTER COVER |
| 20 | 1161-6357A1 | END CAP ASSEMBLY, UPPER |
| 21 | 25-64966 | "O"RING, END CAP |
| 22 | 26-41953 | OIL SEAL, END CAP |
| 23 | 10-812618 | SCREW, UPPER END CAP MOUNTING (1") |
| 24 | 15-73644A1 | SHIM, UPPER END CAP (.006-8-10) |
| 25 | 1144-6691A1 | END CAP ASSEMBLY, LOWER |
| 26 | 25-32546 | "O"RING, END CAP |
| 27 | 26-41953 | OIL SEAL, END CAP |
| 28 | 10-30225 | SCREW, LOWER END CAP MOUNTING (1") |
| 29 | 15-20085A1 | SHIM, LOWER END CAP (.002-3-5-10) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1593-7513A12 | DRIVE SHAFT HOUSING ASSEMBLY (LONG SHAFT) |
| 2 | 19-64649 | PLUG, PLASTIC-TRIM TAB SCREW HOLE |
| 3 | 16-8M0022145 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (1 3/4") |
| 4 | 16-57935 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (3") |
| 5 | 12-65791 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 6 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS (7/16") |
| 7 | 47836 | ROD, PUSH-REVERSE LOCK (LONG SHAFT) |
| 8 | 11-28770 | NUT, JAM-PUSH ROD |
| 9 | 47837 | ROD END, PUSH ROD |
| 10 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK |
| 11 | 18-25191 | COTTER PIN, PUSH ROD PIN |
| 12 | 933361 | GUIDE, PUSH ROD |
| 13 | 35474T | COVER, LOWER MOUNT CLAMP |
| 14 | 10-29722 | SCREW, COVER TO LOWER MOUNT CLAMP (5/8") |
| 15 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 16 | 69592F1 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 17 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING (7/8") |
| 18 | 24-35522 | SPRING, TENSION-LOWER MOUNT CLAMP |
| 19 | 75304T1 | MOUNT, RUBBER-LOWER |
| 20 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 21 | 12-28051 | WASHER, MOUNT SCREW |
| 22 | 12-28053 | WASHER, RUBBER-LOWER MOUNT SCREW |
| 23 | 12-61709 | WASHER, LOWER MOUNT SCREW |
| 24 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 25 | 923373 | MOUNT, RUBBER-UPPER |
| 25A | 25-65936 | "O"RING, UPPER MOUNT |
| 26 | 24929 | PACKING, "U" CUP-UPPER MOUNT SCREW |
| 27 | 79680A1 | COVER, UPPER MOUNT-OUTSIDE HALF |
| 28 | 79680A1 | COVER, UPPER MOUNT-INSIDE HALF |
| 29 | 10-71959 | SCREW, UPPER MOUNT COVER-REAR (1 1/2") |
| 30 | 10-71958 | SCREW, UPPER MOUNT COVER-FRONT (1 3/4") |
| 30A | 12-8M0204649 | WASHER, UPPER MOUNT COVER SCREW |
| 31 | 11-36069 | NUT, UPPER MOUNT COVER SCREW |
| 32 | 12-27727 | WASHER, UPPER MOUNT BOLT (4/16 ID) |
| 33 | 12-66966 | WASHER, RUBBER-UPPER MOUNT BOLT |
| 34 | 12-30514 | WASHER, UPPER MOUNT BOLT (7/16 ID) |
| 35 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 36 | 27-385011 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 37 | 11-64809 | NUT, POWERHEAD TO DRIVE SHAFT HOUSING STUDS (5/16") |
| 38 | 695441 | TUBE, EXHAUST (LONG SHAFT) |
| 39 | 32-45679 | TUBE, WATER INLET (LONG SHAFT) |
| 40 | 23-23651 | SLEEVE, WATER INLET TUBE |
| 41 | 38157 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 42 | 38154 | STRIP, RETAINING-TRIM COVER SEAL (SIDE) |
| 43 | 38158 | STRIP, RETAINING-TRIM COVER SEAL (REAR) |
| 44 | 10-48408 | SCREW, RETAINING STRIP TO DRIVE SHAFT HOUSING (SELF TAPPING) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 865-5890A3 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY (LONG SHAFT) |
| 2 | 65848 | CARRIER, GROMMET |
| 3 | 25-64872 | GROMMET, POPPET RELIEF VALVE |
| 4 | 86596 | POPPET, RELIEF VALVE |
| 5 | 24-64878 | SPRING, COMPRESSION-POPPET RELIEF VALVE |
| 6 | 648771 | DIAPHRAGM, POPPET VALVE |
| 7 | 12-76451 | WASHER, DIAPHRAGM |
| 8 | 10-69570 | SCREW, WASHER AND DIAPHRAGM TO POPPET VALVE |
| 9 | 73216A1 | COVER, TRANSFER PASSAGE |
| 10 | 27-73442 | GASKET, TRANSFER PASSAGE COVER |
| 11 | 10-38837 | SCREW, TRANSFER PASSAGE COVER MOUNTING (1 1/8") |
| 12 | 1025-8116A1 | COVER, CYLINDER BLOCK |
| 13 | 27-88449 | GASKET, CYLINDER BLOCK COVER |
| 14 | 10-28667 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/8") |
| 15 | 22-328022 | PLUG, CYLINDER BLOCK COVER |
| 16 | 27-695252 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK |
| 17 | 27-703351 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK COVER |
| 18 | 69579 | PLATE, BAFFLE-EXHAUST MANIFOLD |
| 19 | 75692 | THERMOSTAT |
| 20 | 27-8M0204714 | GASKET, THERMOSTAT |
| 21 | 27-695242 | GASKET, PLATE TO EXHAUST MANIFOLD COVER |
| 22 | 74214 | COVER, EXHAUST MANIFOLD |
| 23 | 10-38837 | SCREW, PLATE AND MANIFOLD COVER MOUNTING (1 1/8") |
| 24 | 10-74824 | SCREW, PLATE AND MANIFOLD COVER MOUNTING (1 1/4") |
| 25 | 10-70602 | SCREW, PLATE/MANIFOLD COVER MOUNTING (2") |
| 26 | 87-33386A3 | SWITCH, MERCURY |
| 27 | 10-37655 | SCREW, MERCURY SWITCH TO CRANKCASE (1/2") |
| 28 | 17-36242 | PIN, ROLL-MERCURY SWITCH |
| 29 | 61990 | STA-STRAP, MERCURY SWITCH LEAD |
| 30 | 32-9938779 | HOSE, CRANKCASE BLEED (12") |
| 31 | 21-64871A3 | FITTING, CRANKCASE BLEED |
| 32 | 22-56759 | FITTING, CRANKCASE BLEED (PRESS IN) |
| 33 | 54-648552 | CLIP, BLEED HOSE |
| 34 | 10-62568 | SCREW, BLEED HOSE CLIP |
| 35 | 8M0084613 | "C"WASHER, BLEED HOSE CLIP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-52901 | NUT, FLYWHEEL |
| 2 | 12-33001 | WASHER, FLYWHEEL NUT |
| 3 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 4 | 248-8722A5 | FLYWHEEL ASSEMBLY |
| 5 | 10-68997 | SCREW, PLATE/HUB TO FLEXIBLE PLATE (3/4") |
| 6 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL (5/8") |
| 7 | 889351 | PLATE, SWITCH |
| 8 | 25-57009001 | GROMMET, SWITCH BOX PLATE |
| 9 | 10-824941 | SCREW, SWITCH BOX PLATE TO CYLINDER BLOCK (3/4") |
| 10 | 12-56720 | WASHER, SWITCH BOX PLATE SCREW |
| 11 | 332-7778A12 | SWITCH BOX ASSEMBLY |
| 12 | 10-26251 | SCREW, SWITCH BOX TO PLATE (13/16") |
| 13 | 46933A6 | WIRE ASSEMBLY, SWITCH BOX SCREW |
| 14 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 15 | 84-68896A1 | WIRE ASSEMBLY, SWITCH BOX TO COIL (GREEN/RED) |
| 16 | 84-60466A17 | WIRE ASSEMBLY, SWITCH BOX TO COIL (BLACK) |
| 17 | 73439 | PLATE, MOUNTING-IGNITION COIL |
| 18 | 300-8M0166172 | IGNITION COIL ASSEMBLY |
| 19 | 11-45076 | NUT, IGNITION COIL TERMINAL |
| 20 | 43542 | COVER, IGNITION COIL |
| 21 | 10-46368 | SCREW, COVER TO MOUNTING PLATE (2") |
| 22 | 398-5704A7 | STATOR ASSEMBLY |
| 23 | 10-63136 | SCREW, STATOR TO UPPER END CAP (7/8") |
| 24 | 96455A8 | TRIGGER PLATE ASSEMBLY |
| 25 | 54-28700 | CLAMP, STATOR LEADS ATTACHING |
| 26 | 10-98253 | SCREW, CLAMP TO CRANKCASE (1/2") |
| 27 | 84-813715A1 | WIRE ASSEMBLY, SPARK PLUG |
| 28 | 332-2854T01 | BOOT, IGNITION COIL END |
| 29 | 33-896329827 | SPARK PLUG (AC#V40FFM) |
| 30 | 15-74049 | SHIM, STATOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 62973A4 | FUEL PUMP ASSEMBLY |
| 2 | 21-30430A3 | CHECK VALVE ASSEMBLY |
| 3 | 55278A1 | DIAPHRAGM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING (3/8") |
| 8 | 10-86885 | SCREW, PUMP MOUNTING (1 5/8") |
| 9 | 22-328022 | PLUG, PIPE-FUEL PUMP |
| 10 | 32-774572 | HOSE ASSEMBLY, FUEL PUMP TO EXHAUST PLATE (9 1/2") |
| 11 | 22-996642 | ELBOW, HOSE TO EXHAUST PLATE |
| 12 | 32-774572 | HOSE ASSEMBLY, FUEL PUMP TO TELL TALE NOZZLE (8 1/2") |
| 13 | 54-68725 | CLAMP, HOSE TO FUEL PUMP AND FITTING |
| 14 | 69555001 | NOZZLE, TELL TALE-REAR SUPPORT BRACKET |
| 15 | 54-70705 | CLAMP, TELL TALE NOZZLE |
| 16 | 10-69079 | SCREW, TELL TALE CLAMP |
| 17 | 22-64705 | FITTING, FUEL PUMP (INLET) |
| 18 | 32-8M0108355 | FUEL LINE, ADAPTOR TO FUEL PUMP (12") |
| 19 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 20 | 22-63187 | FITTING, FUEL LINE TO ADAPTOR |
| 21 | 22833 | ADAPTOR, CHECK UNIT (FUEL PUMP) |
| 22 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 23 | 25-16524 | "O"RING, ADAPTOR STEM |
| 24 | 24-23067T | SPRING, ADAPTOR STEM |
| 25 | 30188 | CUP WASHER, ADAPTOR |
| 26 | 10-36154 | SCREW, ADAPTOR TO SOUND ATTENTUATOR (1 3/8") |
| 28 | 32-8M0108355 | FUEL LINE, FUEL PUMP/FUEL FILTER COVER (2 1/2") |
| 29 | 76221 | BASE, FUEL FILTER AND COVER |
| 30 | 10-22698 | SCREW, FILTER BASE TO TRANSFER PASSAGE COVER (1 1/4") |
| 31 | 12-34437 | WASHER, FILTER BASE SCREW |
| 32 | 35-59072 | FILTER, FUEL |
| 33 | 25-35480 | "O"RING, FILTER COVER |
| 34 | 35-91078A1 | COVER, FILTER |
| 35 | 10-32228 | SCREW, FILTER COVER FASTENING (5/8") |
| 36 | 27-25848 | GASKET, FILTER COVER FASTENING SCREW |
| 37 | 22-19688 | FITTING, BASE |
| 38 | 32-8M0108355 | FUEL LINE, BASE TO LOWER CARBUETOR (9 1/2") |
| 39 | 22-64706001 | TEE, LOWER CARBURETOR |
| 40 | 32-8M0108355 | FUEL LINE, CARBURETOR TO CARBURETOR (3") |
| 41 | 22-19688 | FITTING, UPPER CARBURETOR |
| 42 | 22-70007 | FITTING, FUEL PUMP (OUTLET) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1643-6038A10 | GEAR HOUSING ASSEMBLY, COMPLETE (LONG SHAFT) -SEE FOOTNOTE |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY |
| 2 | 17-21438 | PIN, DOWEL-GEAR HOUSING |
| 3 | 16-33778 | STUD, WATER PUMP BODY/BASE TO GEAR HOUSING (2 5/8") |
| 4 | 16-8M0034453 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 3/16") |
| 5 | 31-62091T | BEARING, ROLLER-DRIVE SHAFT |
| 6 | 72849A1 | SCREEN, WATER INTAKE-PORT -LONG SHAFT |
| 7 | 10-36070 | SCREW, SCREENS TO GEAR HOUSING (1 1/4") |
| 8 | 11-859124 | NUT, SCREEN TO GEAR HOUSING SCREW |
| 9 | 92815 | PLATE, SUPPORT-EXHAUST TUBE SEAL |
| 10 | 37721001 | SEAL, EXHAUST TUBE |
| 11 | 43-60245 | GEAR, PINION-DRIVE SHAFT |
| 12 | 11-55910 | NUT, PINION GEAR TO DRIVE SHAFT |
| 13 | 27-32771 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 14 | 25-26855 | "O"RING, WATER PUMP BASE |
| 15 | 46-73640T01 | WATER PUMP BASE ASSEMBLY |
| 16 | 26-79831 | OIL SEAL, WATER PUMP BASE |
| 17 | 26-90562 | OIL SEAL, WATER PUMP BASE |
| 18 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 19 | 27-19553 | GASKET, LOWER-WATER PUMP BASE TO FACE PLATE |
| 20 | 32768 | PLATE, FACE-WATER PUMP BASE TO WATER PUMP BODY |
| 21 | 27-19551 | GASKET, UPPER-FACE PLATE TO WATER PUMP BODY |
| 22 | 47-89983T | IMPELLER, WATER PUMP |
| 23 | 28-8M0032837 | KEY, IMPELLER DRIVE |
| 24 | 46-77822A1 | WATER PUMP BODY ASSEMBLY |
| 25 | 48753 | INSERT, WATER PUMP BODY |
| 26 | 12-8M0204649 | WASHER, WATER PUMP BODY AND BASE STUDS |
| 27 | 11-36069 | NUT, WATER PUMP BODY AND BASE STUDS |
| 28 | 26-38452 | SEAL, WATER PUMP BODY TO WATER TUBE |
| 29 | 12-38453 | WASHER, CUPPED-WATER TUBE SEAL |
| 30 | 25-20273 | RING, RUBBER-CENTRIFUGAL SLINGER |
| 31 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 32 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 35 | 69787A1 | SHAFT ASSEMBLY, SHIFT-LOWER |
| 36 | 53-29641 | CLIP, RETAINING-SHIFT SHAFT |
| 37 | 25-25439 | "O"RING, SHIFT SHAFT BUSHING |
| 38 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 39 | 26-24590 | OIL SEAL, SHIFT SHAFT BUSHING (LOWER) |
| 40 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 41 | 12-31266 | WASHER, RUBBER-SHIFT SHAFT BUSHING |
| 42 | 78036 | BASE, LOWER-REVERSE LOCKING |
| 43 | 69542 | CAM, REVERSE LOCKING |
| 44 | 45-76088A2 | DRIVE SHAFT ASSEMBLY (LONG SHAFT) |
| 45 | 24-20254 | SPRING, COMPRESSION-DRIVE SHAFT |
| 46 | 17-30545 | PIN, DRIVE SHAFT |
| 47 | 88181 | SLEEVE, LUBRICATION-DRIVE SHAFT |
| 48 | 15-20929A1 | SHIM, BEARING TO GEAR HOUSING (.002-3-5-10) |
| 49 | 31-38146A1 | ROLLER BEARING ASSEMBLY, TAPERED-DRIVE SHAFT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -1 | 1643-6038A10 | GEAR HOUSING ASSEMBLY, COMPLETE (LONG SHAFT) -SEE FOOTNOTE |
| - | 1643-6038A9 | GEAR HOUSING ASSEMBLY, COMPLETE (SHORT SHAFT)-SEE FOOTNOTE |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY (SEE G6 FOR BREAKDOWN) |
| 50 | 760394 | CAM SHIFT |
| 51 | 38441 | FOLLOWER, CAM |
| 52 | 20843 | SLIDE, CROSS PIN |
| 53 | 24-39845 | SPRING, COMPRESSION-CAM FOLLOWER |
| 54 | 15-38374A1 | SHIM, BEARING CUP TO GEAR HOUSING (.002-3-5-10) |
| 55 | 31-38356A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 56 | 31-21739 | BEARING, ROLLER-FOWARD GEAR |
| 57 | 43-60247T5 | FORWARD GEAR ASSEMBLY |
| 58 | 52-92911T | RATCHET, SLIDING CLUTCH |
| 59 | 17-8M0020942 | PIN, CROSS-RATCHET TO PROPELLER SHAFT |
| 60 | 24-38114 | SPRING, RETAINING-CROSS PIN |
| 61 | 44-75365 | SHAFT, PROPELLER |
| 62 | 43-79159T | REVERSE GEAR ASSEMBLY |
| 63 | 15-20927A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) |
| 64 | 12-32004 | WASHER, THRUST-REVERSE GEAR |
| 65 | 30-20839T | BEARING, BALL-REVERSE GEAR |
| 66 | 25-31986 | "O"RING, BEARING CARRIER |
| 67 | 69386T1 | BEARING CARRIER ASSEMBLY |
| 68 | 31-21700 | BEARING, ROLLER-BEARING CARRIER |
| 69 | 26-8M0205511 | OIL SEAL, BEARING CARRIER |
| 70 | 26-8M0203757 | OIL SEAL, BEARING CARRIER-LINE CUTTER |
| 71 | 28-30281 | KEY, LOCATING-BEARING CARRIER |
| 72 | 14-53012 | TAB WASHER, GEAR HOUSING COVER |
| 73 | 11-87763 | COVER, GEAR HOUSING |
| 74 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 75 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 76 | 12-8M0214963 | WASHER, DRIVE SHAFT HOUSING STUD (3/8") |
| 77 | 11-8M0204726 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING (3/8") |
| 78 | 12-65791 | WASHER, DRIVE SHAFT HOUSING STUD (7/16") |
| 79 | 11-8M0204653 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING (7/16") |
| 80 | 65758 | THRUST HUB, PROPELLER |
| 81 | 62124A1 | THRUST HUB ASSEMBLY, REAR |
| 82 | 12-31992 | WASHER, CUPPED-THRUST HUB |
| 83 | 11-69578Q1 | NUT, PROPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-73930A76 | DECAL SET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 814283A2 | BRACKET, ANCHOR-CONTROL CABLES |
| 2 | 60283A1 | LINK ASSEMBLY, SHIFT SHAFT AND ANCHOR BRACKET |
| 3 | 24-20099 | SPRING, LINK TO ANCHOR BRACKET |
| 4 | 37896 | GUIDE BLOCK, LINK |
| 5 | 52100 | WEAR PLATE, NYLON-LINK |
| 6 | 8M0036768 | LATCH, LINK TO ANCHOR BRACKET |
| 7 | 12-69056 | WASHER, LINK LATCH |
| 8 | 11-826709109 | NUT, LINK ATTACHING |
| 9 | 75008A5 | SHIFT SHAFT ASSEMBLY, UPPER (LONG SHAFT) |
| 11 | 13-29720 | WASHER, WAVE-SHIFT SHAFT TO LINK |
| 12 | 23-26600 | BUSHING, NYLON-SHIFT SHAFT TO LINK |
| 13 | 12-24664 | WASHER, LINK (SHIFT SHAFT END) |
| 14 | 39519 | CUP, RETAINER-ANCHOR BRACKET |
| 15 | 87609A1 | LEVER, NYLON-SHIFT CABLE LOCKING |
| 16 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 17 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 18 | 39667 | COVER, NYLON-SHIFT CABLE |
| 19 | 10-69101 | SCREW, ANCHOR BRACKET TO CRANKCASE/CYL. BLOCK (7/8") |
| 20 | 27-60317 | GASKET, POWERHEAD TO EXHAUST PLATE |
| 21 | 73712A3 | EXHAUST PLATE ASSEMBLY |
| 21A | 23-27132 | BUSHING, NYLON-EXHAUST PLATE |
| 22 | 16-8M0034449 | STUD, EXHAUST PLATE TO DRIVE SHAFT HOUSING (1 11/16") |
| 23 | 16-68166 | STUD, EXHAUST PLATE TO DRIVE SHAFT HOUSING (2 1/8") |
| 24 | 73156 | SEAL, WATER INLET TUBE |
| 25 | 12-38453 | WASHER, NYLON-WATER INLET TUBE SEAL |
| 26 | 38500 | RETAINER, WATER INLET TUBE SEAL |
| 27 | 10-69069 | SCREW, RETAINER TO EXHAUST PLATE (3/4") |
| 28 | 60307 | SEAL, EXHAUST PLATE |
| 29 | 60306 | STRIP, RETAINING-EXHAUST PLATE SEAL |
| 30 | 10-62568 | SCREW, RETAINING STRIP TO EXHAUST PLATE (3/8") |
| 31 | 90435 | MOUNT, RUBBER-EXHAUST PLATE TO REAR COWL SUPPORT |
| 32 | 49651A1 | GROUND STRAP ASS'Y, EXHAUST PLATE TO REAR COWL SUPPORT |
| 33 | 12-69057 | WASHER, RUBBER MOUNT ATTAHCING |
| 34 | 11-8267089 | NUT, RUBBER MOUNT TO EXHAUST PLATE |
| 35 | 10-37562 | SCREW, EXHAUST PLATE PLATE TO CYLINDER BLOCK (1") |
| 36 | 27-385011 | GASKET, ADAPTOR PLATE TO DRIVE SHAFT HOUSING |
| 37 | 58911 | EXHAUST TUBE, ADAPTOR |
| 38 | 27-602801 | GASKET, EXHAUST TUBE TO EXHAUST PLATE |
| 39 | 10-28636 | SCREW, EXHAUST TUBE TO EXHAUST PLATE (3/4") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8M0058226 | RECTIFIER ASSEMBLY |
| 2 | 10-38055 | SCREW, RECTIFIER TO PLATE (5/8") |
| 3 | 13-26996 | LOCKWASHER, RECTIFIER SCREW |
| 4 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 5 | 89-853654A1 | STARTER SOLENOID |
| 6 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 7 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 8 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 9 | 11-8M0204668 | NUT, SOLENOID TERMINAL (5/16") |
| 10 | 46265 | BOOT, TERMINAL-STARTER SOLENOID |
| 11 | 10-69054 | SCREW, SOLENOID TO TOP COVER (3/4") |
| 12 | 13-26992 | WASHER, SOLENOID SCREW |
| 13 | 50-44369A1 | STARTER MOTOR ASSEMBLY |
| 14 | 8M0043376 | STOP, RUBBER- STARTER MOTOR |
| 15 | 84-60872 | CABLE, STARTER TO SOUND ATTENTUATOR-BLACK (9 1/2") |
| 16 | 10-28635 | SCREW, CABLE TO STARTER MOTOR (5/8") |
| 17 | 84-93389A6 | CABLE, SOLENOID TO STARTER MOTOR-YELLOW (9 1/2") |
| 18 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 19 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 20 | 23-8M0034918 | COLLAR, RUBBER-STARTER MOUNT |
| 21 | 23-56774 | SPACER, COLLAR TO MOUNTING BRACKETS |
| 22 | 84-62862A4 | CABLE, BATTERY TO STARTER SOLENOID |
| 23 | 84-73204 | WIRING HARNESS (INTERNAL) |
| 24 | 10-69560 | SCREW, WIRING HARNESS TO FRONT SUPPORT BRACKET (1 1/4") |
| 25 | 11-46438 | NUT, WIRING HARNESS SCREW |
| 26 | 60114A1 | BRACKET ASSEMBLY, WIRING HARNESS |
| 27 | 26-60925 | SEAL, WIRING HARNESS BRACKET |
| 28 | 10-89778 | SCREW, WIRING HARNESS BRACKET MOUNTING (2 1/4") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76864 | HOUSING, NYLON-THROTTLE ACTUATOR |
| 2 | 77025 | CAM, NYLON-THROTTLE ACTUATOR |
| 3 | 10-37571 | SCREW, HOUSING TO CRANKCASE (1/2") |
| 4 | 13-26996 | LOCKWASHER, HOUSING TO CRANKCASE SCREW |
| 5 | 60570 | PLATE, RETAINER-ACTUATOR HOUSING |
| 6 | 23-74213 | BARREL, NYLON-THROTTLE LINK ROD |
| 7 | 74164 | ROD, LINK-THROTTLE |
| 8 | 73783 | SWIVEL, LINK ROD TO THROTTLE CONTROL LEVER |
| 9 | 23-26856 | BUSHING, LINK ROD SWIVEL |
| 10 | 12-73288 | WASHER, LINK ROD SWIVEL |
| 11 | 11-45774 | NUT, LINK ROD SWIVEL |
| 12 | 77032A2 | LEVER, THROTTLE CONTROL |
| 13 | 10-67916 | SCREW, ADJUSTING-THROTTLE LEVER (2") |
| 14 | 11-29598 | NUT, JAM-ADJUSTING SCREW |
| 15 | 52023 | CAP, ADJUSTING SCREW |
| 16 | 10-818165 | SCREW, THROTTLE CONTROL LEVER TO CYLINDER BLOCK (1 3/4") |
| 17 | 23-55164 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 18 | 23-55171 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 19 | 24-55162 | SPRING, RETURN-SPARK ADVANCE LEVER |
| 20 | 77031A2 | LEVER, SPARK ADVANCE |
| 21 | 12-68410 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 22 | 10-73656 | SCREW, SPARK ADVANCE ADJUSTING (1 3/8") |
| 23 | 11-68219 | NUT, SPARK ADVANCE ADJUSTING SCREW |
| 24 | 48039 | CAP, SPARK ADVANCE ADJUSTING SCREW |
| 25 | 10-67916 | SCREW, ADJUSTING-SPARK ADVANCE LEVER (2") |
| 26 | 11-29598 | NUT, JAM-ADJUSTING SCREW |
| 27 | 52023 | CAP, ADJUSTING SCREW |
| 28 | 39483 | LATCH, THROTTLE CONTROL LEVER (THROTTLE CABLE) |
| 29 | 10-69026 | SCREW, LATCH TO THROTTLE CONTROL LEVER (7/8") |
| 30 | 24-20099 | SPRING, COMPRESSION-LATCH SCREW |
| 31 | 11-826709109 | NUT, LATCH ATTACHING SCREW |
| 32 | 74897T | BARREL, LINK ROD TO STATOR |
| 33 | 74212 | ROD, LINK-SPARK ADVANCE |
| 34 | 73783 | SWIVEL, LINK ROD TO SPARK ADVANCE LEVER |
Regular maintenance keeps your Mercury 650 (3 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
