🔎 Mercury 275 VERADO (4-STROKE)(6 CYL.) Reference Library — Exploded parts diagrams (32 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 275 VERADO (4-STROKE)(6 CYL.) is a 4-Stroke Supercharged, Inline 6-Cylinder outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
Quick Reference Specifications
| Specification |
Value |
| Engine Type |
4-Stroke Supercharged, Inline 6-Cylinder |
| Horsepower |
275 HP |
| Displacement |
2598 cc (2.6L / 158.5 CID) |
| Bore x Stroke |
82 mm x 82 mm (3.23 in. x 3.23 in.) |
| Spark Plug (Type & Gap) |
NGK ILFR6G-E |
| Engine Oil Capacity |
5.44 qt (Dry sump / Torpedo system) |
| Recommended Engine Oil |
Quicksilver 25W-50 Semi-Synthetic |
| Gear Case Oil Capacity |
~1 qt |
| Idle Speed (in gear) |
650–700 RPM (in gear) |
| Full Throttle RPM Range |
5800 |
| Fuel |
Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 275 VERADO (4-STROKE)(6 CYL.):
-
Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
-
Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
-
Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
-
Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
-
Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 275 VERADO (4-STROKE)(6 CYL.).
▶Accessories (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
899712A01 |
CABLE KIT, Continuity |
▶Adaptor Plate Hose Routings (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
17-884474001 |
PIN, Dowel (12 mm) |
| 2 |
888819002 |
DRAIN, Cowl |
| 3 |
22-888461A01 |
FITTING KIT |
| 4 |
25-892446 |
O-RING, 14 X 1.78 MM |
| 5 |
10-8M0103804 |
SCREW, (M6 x 12 MM) Stainless Steel |
| 6 |
12-8M0214930 |
WASHER |
| 7 |
22-889792A01 |
FITTING KIT, Idle Exhaust |
| 8 |
25-889828 |
O-RING, (.924 x .103) |
| 9 |
10-8M0103804 |
SCREW, (M6 x 12 MM) Stainless Steel |
| 10 |
22-889846 |
FITTING |
| 11 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 12 |
32-888981001 |
HOSE, Idle Exhaust |
| 13 |
892384T |
PLENUM, Exhaust |
| 14 |
10-4006731 |
SCREW, (M6 x 16) |
| 15 |
88238A21 |
CABLE ASSEMBLY |
| 16 |
10-40011126 |
SCREW, (M6 x 13) Stainless Steel |
| 17 |
32-8M0087120 |
HOSE, Manifold Reference-Lower |
| 18 |
25-884546 |
GROMMET |
| 19 |
888523001 |
CLIP |
| 20 |
32-8M0087106 |
HOSE, Water In-Lower |
| 21 |
25-884546 |
GROMMET |
| 22 |
32-8M0087116 |
HOSE, Fuel Supply Module-Out |
| 23 |
25-884546 |
GROMMET |
| 24 |
54-815504104 |
CLAMP, Worm Gear |
| 25 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk), Cut to 21 Inches |
| 26 |
892562T01 |
HOUSING, Manifold |
| 27 |
892117 |
SEAL |
| 28 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
| 29 |
32-887756 |
HOSE, Water In-Upper |
| 30 |
32-8M0203762 |
HOSE, Hi-Pressure Filter |
| 31 |
35-879885Q |
FILTER, Fuel |
| 32 |
32-8M0203763 |
HOSE, Hi-Pressure Filter To Fuel Rail |
▶Adaptor Plate-Lower (30 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
887623T03 |
PICKUP ASSEMBLY, Oil |
| 2 |
25-8M0092943 |
O-RING, (1.239 x .070) |
| 3 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
| 4 |
27-889618001 |
GASKET, Oil Sump |
| 5 |
880626T01 |
TUBE ASSEMBLY, Exhaust |
| 6 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 7 |
26-880629 |
SEAL, Exhaust Tube |
| 8 |
880639T |
SUMP ASSEMBLY, Oil |
| 9 |
10-8M0103808 |
SCREW, (M6 x 20 MM) Stainless Steel |
| 10 |
8M0082193 |
TUBE ASSEMBLY, Oil Drain Comment: (X-Long/XX-Long) |
| 11 |
25-892446 |
O-RING, 14 X 1.78 MM |
| 12 |
17-892228 |
PIN, Dowel |
| 13 |
888592005 |
PLUG ASSEMBLY, Oil Drain |
| 14 |
26-888593 |
SEAL, Drain Plug |
| 15 |
10-8M0103808 |
SCREW, (M6 x 20 MM) Stainless Steel |
| 16 |
32-885541A03 |
TUBE ASSEMBLY, Water (30.00 Inch) Comment: (XX-Long) |
| 17 |
25-892445 |
O-RING |
| 18 |
22-8M0214983 |
COUPLING |
| 19 |
25-8M0204673 |
O-RING, (.921 x .139) |
| 20 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 21 |
8M0114707 |
POPPET ASSEMBLY |
| 22 |
24-64878 |
SPRING, (Black) |
| 23 |
893385001 |
RETAINER |
| 24 |
648771 |
DIAPHRAGM |
| 25 |
889706 |
WASHER |
| 26 |
10-69570 |
SCREW, (#10-16 x .750) |
| 27 |
893384001 |
COVER, Poppet |
| 28 |
27-889561 |
GASKET, Poppet |
| 29 |
10-88552535 |
SCREW, (M6 x 35 MM) Stainless Steel |
▶Alternator/Belt Tensioner Mounting (18 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
892940T02 |
ALTERNATOR, 70 Ampere |
| 2 |
8M0101707 |
BELT TENSIONER |
| 3 |
8M6003035 |
PULLEY |
| 4 |
10-885349501 |
SCREW |
| 5 |
23-855729 |
MOUNT |
| 6 |
12-845998 |
WASHER, (.406 x 1.250 x .089) |
| 7 |
10-8M0103823 |
SCREW, (M10 x 45) |
| 8 |
8M0219204 |
BRACKET |
| 9 |
17-888517 |
PIN |
| 10 |
57-8M0232583 |
BELT, Drive |
| 11 |
10-8M0103824 |
SCREW, (M10 x 85) |
| 12 |
12-4002319 |
WASHER |
| 13 |
11-401386 |
NUT, (M6) Stainless Steel |
| 14 |
84-856583A12 |
CABLE ASSEMBLY |
| 15 |
84-858414A04 |
CABLE ASSEMBLY, Brass, Braided |
| 16 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
| 17 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 18 |
54-828991T |
CLIP |
▶Charge Cooler/Intake Manfifold (39 parts)
| Ref |
OEM Part # |
Part Name |
| - |
8M0185613 |
MODULE ASSEMBLY, Intergrated Air Fuel Comment: SN# 1B279253 & Up |
| 1 |
8M0132388 |
CAC ASSEMBLY |
| 2 |
895032 |
STRAP |
| 3 |
10-8M0041014 |
SCREW, (M6 x 18) |
| 4 |
22-8M0039993 |
FITTING |
| 5 |
NSS |
NOT SOLD SEPARATE, O-Ring (Part of 895031 Kit) |
| 6 |
895030A01 |
STACK ASSEMBLY |
| 7 |
895031 |
SEAL |
| 8 |
NSS |
NOT SOLD SEPARATE, O-Ring (Part of 895031 Kit) |
| 9 |
19-8M0048079 |
FITTING |
| 10 |
NSS |
NOT SOLD SEPARATE, O-Ring (Part of 895031 Kit) |
| 11 |
895035 |
PLATE |
| 12 |
891663001 |
SENSOR ASSEMBLY, Temperature |
| 13 |
25-892317001 |
O-RING |
| 14 |
10-895054 |
SCREW, (M4 x 16 MM) |
| 15 |
880582T05 |
MANIFOLD ASSEMBLY, Intake |
| 16 |
895019 |
SEAL |
| 17 |
895020 |
SEAL |
| 18 |
8M6000639 |
SENSOR |
| 19 |
54-8M0214911 |
CLAMP, (15.7 mm), Map Sensor to Boot |
| 20 |
892952500 |
BOOT |
| 21 |
54-8M0204719 |
CLAMP, (36.1 mm) |
| 22 |
10-8M0103807 |
SCREW, (M6 x 25 MM) |
| 23 |
895022A01 |
FUEL RAIL KIT |
| 24 |
895028A01 |
VALVE, Schrader |
| 25 |
25-895056 |
O-RING |
| 26 |
895026 |
BRACKET |
| 27 |
10-895051 |
SCREW, (M5 x 10) |
| 28 |
895024 |
BRACKET |
| 29 |
10-895051 |
SCREW, (M5 x 10) |
| 30 |
8M0041571 |
INJECTOR, Fuel Comment: SN# 1B279253 & Up |
| 31 |
25-851889 |
O-RING |
| 32 |
895025 |
DAMPER |
| 33 |
25-851889 |
O-RING |
| 34 |
32-895029A01 |
TUBE KIT, Fuel Inlet |
| 35 |
12-895055 |
WASHER |
| 36 |
25-895057 |
O-RING |
| 37 |
895027 |
BRACKET |
| 38 |
10-895051 |
SCREW, (M5 x 10) |
▶Charge Cooler/Intake Manifold Hose Routings (12 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NSS |
NOT SOLD SEPARATE, Hose Assembly |
| 1 |
11-826292 |
NUT, (M10) Brass/Nickel Plated |
| 2 |
10-8M0048051 |
SCREW |
| 3 |
32-889593001 |
HOSE |
| 4 |
22-8M6003382 |
FITTING ASSEMBLY, Flushing |
| 5 |
32-889592001 |
HOSE |
| 6 |
54-8M0187145 |
CLAMP, (34.6 mm) |
| 7 |
32-892967 |
HOSE |
| 8 |
54-850181 |
TIE STRAP, (11.750 Inches) |
| 9 |
54-8M0187145 |
CLAMP, (34.6 mm) |
| 10 |
32-8M0203767 |
HOSE, Boost, Manifold Reference-Upper |
| 11 |
10-8M0103821 |
SCREW, (M10 x 30) |
▶Cowl Latching (13 parts)
| Ref |
OEM Part # |
Part Name |
| - |
892062T02 |
LATCH ASSEMBLY, Front and Side |
| 1 |
888976T01 |
BRACKET |
| 2 |
888974A02 |
SIDE LATCH ASSEMBLY |
| 3 |
24-888996 |
SPRING |
| 4 |
23-896124 |
SLEEVE |
| 5 |
25-828249 |
GROMMET |
| 6 |
889694 |
CABLE |
| 7 |
53-27290 |
RING, Retaining |
| 8 |
12-30164 |
WASHER, (.192 x .375 x .0312) Stainless Steel |
| 9 |
17-893380 |
PIN, Clevis |
| 10 |
53-61319 |
E RING |
| 11 |
10-4006731 |
SCREW, (M6 x 16) |
| 12 |
16-8M0099404 |
STUD |
▶Crankshaft, Pistons and Connecting Rods (22 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
400-891644A04 |
CRANKSHAFT ASSEMBLY |
| 2 |
23-897498T04 |
BEARING, Main - Orange, Crankshaft-Upper Comment: (Orange) |
| 3 |
23-8M0117004 |
BEARING, Thrust - Orange, Crankshaft-Lower Comment: (Orange) |
| 4 |
26-8M0032912 |
SEAL, Top Main Bearing |
| 5 |
23-896883 |
SPACER |
| 6 |
53-896882 |
RING, Retaining |
| 7 |
28-91800 |
KEY, Woodruff |
| 8 |
19-885348 |
CAP, Flywheel Bolt |
| 9 |
8M0103398 |
CHAIN, Roller Cam Drive |
| 10 |
662-8M0103285 |
CONNECTING ROD ASSEMBLY |
| 11 |
10-884441 |
BOLT |
| 12 |
23-892005A03 |
BEARING, Connecting Rod - Orange Comment: (Orange) |
| 13 |
700-897737T01 |
PISTON ASSEMBLY |
| 14 |
39-881180A02 |
RING SET, Piston |
| 15 |
NSS |
NOT SOLD SEPARATE, Piston Ring-Oil |
| 16 |
NSS |
NOT SOLD SEPARATE, Piston Ring-2nd |
| 17 |
NSS |
NOT SOLD SEPARATE, Piston Pin |
| 18 |
40-881184 |
CIRCLIP |
| 19 |
200-888983T03 |
FLYWHEEL |
| 20 |
10-8M0147042 |
BOLT, (M20 x 68 MM) |
| 21 |
12-8M0090010 |
WASHER |
▶Cylinder Block (31 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
800-880506A11 |
CYLINDER BLOCK ASSEMBLY |
| 2 |
8M0111325 |
BRACKET, Mounting-Starter Motor |
| 3 |
10-8M0103815 |
SCREW, (M8 x 40) |
| 4 |
19-889767 |
PLUG, (12 mm) |
| 5 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 6 |
23-893392001 |
DAMPER |
| 7 |
19-896951 |
PLUG, (24 mm) |
| 8 |
17-880524 |
PIN, Dowel (14 mm) |
| 9 |
25-884409 |
O-RING |
| 10 |
17-884424 |
PIN, Dowel (11 mm) |
| 11 |
25-884423 |
O-RING |
| 12 |
10-8M4501000 |
SCREW, (M10 x 342) |
| 13 |
12-892573001 |
WASHER |
| 14 |
10-8M0103818 |
SCREW, (M8 x 75) |
| 15 |
8M0082988 |
SENSOR |
| 16 |
10-40011107 |
SCREW, (M5 x 16) Stainless Steel |
| 17 |
8M0148668 |
SENSOR ASSEMBLY |
| 18 |
25-896699 |
O-RING, (.351 x .072) |
| 19 |
71-8M0142688 |
SENSOR, Oil Pressure |
| 20 |
27-8M0033476 |
GASKET, Head |
| 21 |
17-888517 |
PIN |
| 22 |
10-8M0193831 |
SCREW, (M8 x 115) |
| 23 |
10-8M0193659 |
SCREW, (M8 x 50) |
| 24 |
27-880624003 |
GASKET, Block to Adaptor |
| 25 |
880559 |
GUIDE, Fixed |
| 26 |
880557 |
GUIDE, Moveable |
| 27 |
10-892456045 |
SCREW |
| 28 |
16-8M0022160 |
STUD |
| 29 |
11-401388 |
NUT, (M8) Stainless Steel |
| 30 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
▶Cylinder Head and Camshaft (55 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
900-8M0152336 |
CYLINDER HEAD ASSEMBLY |
| 2 |
19-889767 |
PLUG, (12 mm) |
| 3 |
19-891953 |
PLUG, (18 mm) |
| 4 |
19-896951 |
PLUG, (24 mm) |
| 5 |
19-8M0087446 |
PLUG, (10 mm) |
| 6 |
17-880524 |
PIN, Dowel (14 mm) |
| 7 |
10-8M0163131 |
BOLT, (M6 x 36 MM) |
| 8 |
880533 |
SEAT, Intake Valve |
| 9 |
8M0089477 |
SEAT, Exhaust Valve |
| 10 |
880537 |
GUIDE, Intake and Exhaust Valves |
| 11 |
20-898907 |
VALVE, Intake |
| 12 |
20-898908 |
VALVE, Exhaust |
| 13 |
26-8M0214986 |
SEAL, Valve |
| 14 |
24-8M0011503 |
SPRING, Intake and Exhaust Valve |
| 15 |
8M0908500 |
RETAINER ASSEMBLY, Valves |
| 16 |
28-880543 |
KEY |
| 17 |
NSS |
NOT SOLD SEPARATE, CAP |
| 18 |
400-892112T02 |
CAMSHAFT, Intake |
| 19 |
400-892113T04 |
CAMSHAFT, Exhaust |
| 20 |
88054835 |
TAPPET Comment: (3.721) |
| 21 |
10-892454030 |
SCREW, (M6 x 30) |
| 22 |
892596T04 |
COVER, Camshaft |
| 23 |
892584 |
SEAL |
| 24 |
8M6000959 |
SEAL |
| 25 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
| 26 |
859578A1 |
PLUG ASSEMBLY, Oil |
| 27 |
25-8M0204673 |
O-RING, (.921 x .139) |
| 28 |
880558 |
GUIDE, Short |
| 29 |
8M0148668 |
SENSOR ASSEMBLY |
| 30 |
25-896699 |
O-RING, (.351 x .072) |
| 31 |
10-8M0103817 |
SCREW, (M8 x 60) |
| 32 |
898463A01 |
TENSIONER ASSEMBLY |
| 33 |
25-898836 |
O-RING, Orange |
| 34 |
1100-8M0064752 |
END CAP, Tensioner |
| 35 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
| 36 |
10-8M0103809 |
SCREW, (M6 x 40 MM) Stainless Steel |
| 37 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 38 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 39 |
25-833155 |
GROMMET |
| 40 |
23-8502341 |
BUSHING |
| 41 |
54-892833 |
CLIP |
| 42 |
32-889591A05 |
HOSE ASSEMBLY, Breather |
| 43 |
339-880615T01 |
COIL ASSEMBLY |
| 44 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
| 45 |
33-889246Q39 |
SPARK PLUG, NGK-ILFR6G |
| 46 |
54-858954 |
CLIP, (.625) |
| 47 |
54-850181 |
TIE STRAP, (11.750 Inches) |
| 48 |
43-880550 |
SPROCKET, Cam Drive |
| 49 |
10-8M0021532 |
SCREW, (M12 x 40) Comment: (Left Hand) |
| 50 |
10-8M0103804 |
SCREW, (M6 x 12 MM) Stainless Steel |
| 51 |
54-889746001 |
CLIP |
| 52 |
54-888988019 |
CLAMP, (22.6 mm) |
| 53 |
8M0011987 |
SENSOR ASSEMBLY |
| 54 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
▶Driveshaft Housing (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
1500-8M0113286 |
HOUSING, Driveshaft Comment: (Long) |
| 2 |
885364T01 |
CHAP ASSEMBLY, Lower-Port Comment: (X-Long/XX-Long) |
| 3 |
885363T01 |
CHAP ASSEMBLY, Lower-Starboard Comment: (X-Long/XX-Long) |
| 4 |
10-892073002 |
SHOULDER SCREW, (M6) |
| 5 |
25-889568001 |
GROMMET |
| 6 |
889656T01 |
SHROUD, Vapor Separator |
| 7 |
10-8M0103818 |
SCREW, (M8 x 75) |
| 8 |
10-8M0103812 |
SCREW, (M8 x 120) |
| 9 |
10-8M0103816 |
SCREW, (M8 x 50) |
| 10 |
10-8M0103815 |
SCREW, (M8 x 40) |
| 11 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 12 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 13 |
897784A01 |
BRACKET KIT, Upper Chap |
| 14 |
10-8M0103806 |
SCREW, (M6 x 20 MM) Stainless Steel |
| 15 |
10-8M0103813 |
SCREW, (M8 x 30) |
| 16 |
32-85944975 |
TUBING, (72.00 Inches Bulk), Cut to 44 Inches) Comment: SN# 1B231499 & Up |
| 17 |
22-859448T |
FITTING Comment: SN# 1B231498 & Below |
| 18 |
25-8M0153609 |
GROMMET Comment: SN# 1B231498 & Below |
| 19 |
889831001 |
RETAINER Comment: SN# 1B231499 & Up |
| 20 |
16-8M0008031 |
STUD, (M12 x 52) Comment: (Long/X-Long) |
| 21 |
12-856982 |
WASHER, (.500 x .810 x .090) Stainless Steel |
| 22 |
11-896895 |
NUT, (M12) |
| 23 |
10-8M0102995 |
SCREW, (M12 x 35 MM) Comment: (Long/X-Long) |
| 24 |
19-824928001 |
PLUG, Rubber |
| 25 |
12-8M0214963 |
WASHER, (.406 x .750 x .105) Stainless Steel |
| 26 |
11-884412 |
NUT |
| 27 |
10-8M0103825 |
SCREW, (M12 x 45) |
| 28 |
8M0105088 |
SPACER Comment: (XX-Long) |
| 29 |
10-857137 |
SCREW, (M12 x 160) Comment: (XX-Long) |
| 30 |
16-8M0008047 |
STUD, (M12 x 179) Comment: (XX-Long) |
| 31 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) Comment: (XX-Long) |
| 32 |
23-855623 |
BUSHING (Use where Applicable) Comment: (XX-Long) |
| 33 |
54-898033 |
O-RING |
| 34 |
NSS |
NOT SOLD SEPARATE, Decal-Oil Drain |
| 35 |
1500-8M0113287 |
HOUSING, Driveshaft Comment: (X-Long/XX-Long) |
| 36 |
891966006 |
BRACKET, Cowl Comment: (X-Long/XX-Long) |
| 37 |
10-8M0103806 |
SCREW, (M6 x 20 MM) Stainless Steel Comment: (X-Long/XX-Long) |
▶Electrical Box Components (41 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NSS |
NOT SOLD SEPARATE, Relay Bracket Assembly |
| 1 |
885560T03 |
BASE, Electrical Box |
| 2 |
885561T |
COVER, Fuse Box |
| 3 |
88-8M0167280 |
COVER, Fuse |
| 4 |
25-885583 |
SEAL |
| 5 |
889531 |
STRAP |
| 6 |
885584 |
PIN, Hinge |
| 7 |
25-833155 |
GROMMET |
| 8 |
23-8502341 |
BUSHING |
| 9 |
88-832969T20 |
FUSE, Mini - Yellow - 20 Ampere |
| 10 |
11-400213 |
NUT, (M8) Stainless Steel |
| 11 |
895099 |
EXTRACTOR, Fuse |
| 12 |
32-828547753 |
CONDUIT, (.750 Inside Diameter x 3.00 Feet Bulk) |
| 13 |
10-40011146 |
SCREW, (M8 x 13) Stainless Steel |
| 14 |
12-843108 |
WASHER, (.330 x .560 x .060) Stainless Steel |
| 15 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 16 |
892244 |
STRAP, Cover |
| 17 |
54-879962 |
CLIP |
| 18 |
89790728T |
PCM, Propulsion Control Module Comment: (275 EU) |
| 19 |
84-8M0082643 |
HARNESS ASSEMBLY, Engine |
| 20 |
882751A04 |
RELAY ASSEMBLY |
| 21 |
NSS |
NOT SOLD SEPARATE, Decal-Trim Relay |
| 22 |
889532 |
BRACKET |
| 23 |
10-40007103 |
SCREW, (M5 x 6) |
| 24 |
84-93388A17 |
CABLE ASSEMBLY, (8.50 Inches) |
| 25 |
84-879345T34 |
HARNESS ASSEMBLY, Trim |
| 26 |
84-8M0088927 |
HARNESS ASSEMBLY, Fuse |
| 27 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 28 |
54-891520001 |
CLIP |
| 29 |
10-82129114 |
SCREW, (M6 x 14) |
| 30 |
877613A02 |
CONNECTOR ASSEMBLY, Weather Cap 6 Pin |
| 31 |
54-879962 |
CLIP |
| 32 |
84-8M0113732 |
HARNESS ASSEMBLY |
| 33 |
862646 |
FUSE, Tan - 5 Ampere |
| 34 |
84-88439A25 |
CABLE ASSEMBLY, Battery - Positive Comment: (Long) |
| 35 |
11-401388 |
NUT, (M8) Stainless Steel |
| 36 |
11-8M0204671 |
NUT, (.375-16), Battery Cable-Positive |
| 37 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 38 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 39 |
84-88439A26 |
CABLE ASSEMBLY, Battery - Negative Comment: (Long) |
| 40 |
11-8M0204668 |
NUT, (.312-18), Battery Cable-Negative |
▶Fuel Supply Module (21 parts)
| Ref |
OEM Part # |
Part Name |
| - |
889283A01 |
TOOL KIT, Fuel Priming |
| 1 |
84-8M0130900 |
HARNESS ASSEMBLY |
| 2 |
53-880596515 |
CLIP |
| 3 |
25-855362001 |
GROMMET |
| 4 |
23-855364 |
BUSHING |
| 5 |
880596T50 |
COVER KIT |
| 6 |
10-880596513 |
SCREW |
| 7 |
880596503 |
REGULATOR, With O-Rings |
| 8 |
54-880596512 |
CLAMP |
| 9 |
32-880596A05 |
HOSE |
| 10 |
8M6000359 |
FLOAT |
| 11 |
880596T55 |
PUMP ASSEMBLY, Fuel - High Pressure |
| 12 |
880596506 |
SEAL |
| 13 |
26-880596507 |
SEAL |
| 14 |
26-880596502 |
SEAL |
| 15 |
880596T58 |
PUMP KIT, Fuel - Lift |
| 16 |
880596509 |
ISOLATOR |
| 17 |
26-880596510 |
SEAL |
| 18 |
880596501 |
HOUSING ASSEMBLY |
| 19 |
19-880596516 |
PLUG |
| 20 |
25-880596517 |
O-RING |
▶Gear Housing(Driveshaft)(Standard/Counter Rotation) (47 parts)
| Ref |
OEM Part # |
Part Name |
| - |
817275A08 |
REPAIR KIT, Water Pump-Upper |
| 0 |
1600-880686T17 |
GEAR HOUSING ASSEMBLY, Complete Comment: (Counter Rotation-XX-Long) |
| 1 |
1600-880687T01 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
821526001 |
FILLER BLOCK |
| 3 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 4 |
97-826134Q |
ANODE |
| 5 |
10-4000333 |
SCREW, (M6 x 40) |
| 6 |
11-401386 |
NUT, (M6) Stainless Steel |
| 7 |
10-79953A04 |
PLUG ASSEMBLY, (.375-16 x .250) |
| 8 |
26-8M0204693 |
SEAL |
| 9 |
97-76214Q5 |
ANODE KIT Comment: (Quicksilver) |
| 10 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
| 11 |
32-85944975 |
TUBING, (72.00 Inches Bulk), Cut to 17 Inches (Use where Applicable) Comment: (XX-Long) |
| 12 |
22-881866 |
FITTING |
| 13 |
8M0047129 |
COVER ASSEMBLY |
| 14 |
26-8M0204708 |
SEAL, Oil |
| 15 |
25-896522 |
O-RING, (799 x .103) |
| 16 |
10-8M0204741 |
SCREW, (M6 x 20) Stainless Steel |
| 17 |
12-77674 |
WASHER |
| 18 |
27-880729 |
GASKET |
| 19 |
824145 |
SHIFT SHAFT |
| 20 |
NSS |
NOT SOLD SEPARATE, Pinion Gear 13 Teeth Comment: (Part of 43-892595A02) |
| 21 |
11-35921 |
NUT, (.625-18) |
| 22 |
12-92721 |
WASHER |
| 23 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 24 |
45-888574 |
DRIVESHAFT Comment: (XX-Long) |
| 25 |
15-884327A02 |
SHIM/BEARING ASSEMBLY |
| 26 |
15-8M0063268 |
SHIM ASSEMBLY |
| 27 |
NSS |
NOT SOLD SEPARATE, Roller Bearing Assembly |
| 28 |
NSS |
NOT SOLD SEPARATE, Cup |
| 29 |
NSS |
NOT SOLD SEPARATE, Roller Bearing Assembly |
| 30 |
NSS |
NOT SOLD SEPARATE, Cup |
| 31 |
8245191 |
RETAINER |
| 32 |
817275A09 |
HOUSING, Water Pump-Complete |
| 33 |
26-861415A1 |
SEAL KIT |
| 34 |
10-8M0204741 |
SCREW, (M6 x 20) Stainless Steel |
| 35 |
47-43026T2 |
IMPELLER |
| 36 |
8M0204709 |
FACEPLATE |
| 37 |
53-880719 |
RING, Retaining |
| 38 |
8M0007131 |
CARRIER ASSEMBLY, Oil Seal |
| 39 |
25-8M0142854 |
O-RING, (2.175 x .103) |
| 40 |
NSS |
NOT SOLD SEPARATE, Oil Seal |
| 41 |
NSS |
NOT SOLD SEPARATE, Oil Seal |
| 42 |
28-8M0204723 |
KEY |
| 43 |
27-8172771 |
GASKET |
| 44 |
27-430331 |
GASKET |
| 45 |
43585 |
COUPLING |
▶Gear Housing, Propeller Shaft - Counter Rotation (42 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-830749A01 |
SEAL KIT, Gear Housing |
| 0 |
1600-880686T17 |
GEAR HOUSING ASSEMBLY, Complete Comment: (XX-Long) |
| 1 |
1600-880687T01 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
NSS |
NOT SOLD SEPARATE, Plug |
| 3 |
896847A01 |
CRANK, Shifter |
| 4 |
8M0235940 |
SPOOL ASSEMBLY |
| 5 |
NSS |
NOT SOLD SEPARATE, Spool |
| 6 |
18-469501 |
COTTER PIN |
| 7 |
NSS |
NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 |
43-892809A02 |
GEAR ASSEMBLY, Reverse |
| 9 |
31-8M0142836 |
BEARING ASSEMBLY, Roller |
| 10 |
NSS |
NOT SOLD SEPARATE, Cup |
| 11 |
53-8M0051043 |
RING, Retaining |
| 12 |
12-8M0053823 |
THRUST WASHER |
| 13 |
31-8M0142835 |
BEARING ASSEMBLY, Roller-Tappered |
| 14 |
NSS |
NOT SOLD SEPARATE, Cup |
| 15 |
15-884328A01 |
SHIM SET |
| 16 |
24-30893 |
SPRING |
| 17 |
52-880714T |
CLUTCH |
| 18 |
17-8M0100263 |
PIN, Cross |
| 19 |
17-828356 |
PIN, Detent |
| 20 |
44-888530 |
PROPELLER SHAFT |
| 21 |
43-8M0119540 |
GEAR SET, Forward/Pinion |
| 22 |
880699 |
THRUST RING |
| 23 |
31-815480 |
BEARING, Thrust |
| 24 |
880696A10 |
CARRIER ASSEMBLY, Bearing |
| 25 |
25-8M0142840 |
O-RING, (3.850 x .210) |
| 26 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 27 |
8M0148384 |
ADAPTOR, Bearing |
| 28 |
15-47397A1 |
SHIM SET |
| 29 |
15-891936A01 |
SHIM SET |
| 30 |
31-8M0148319 |
BEARING ASSEMBLY, Tapered |
| 31 |
NSS |
NOT SOLD SEPARATE, Cup |
| 32 |
26-8M0204700 |
SEAL, Oil |
| 33 |
26-8M0204700 |
SEAL, Oil |
| 34 |
10-880717A01 |
SCREW/SEAL KIT |
| 35 |
26-8M0204693 |
SEAL |
| 36 |
8M0053183 |
ADAPTOR |
| 37 |
23-891919001 |
SPACER, Thrust |
| 38 |
14-880697 |
KEYED WASHER |
| 39 |
8M2011027 |
RETAINER |
| 40 |
NSS |
NOT SOLD SEPARATE, Decal-Counter Rotation |
▶Gear Housing, Propeller Shaft - Standard Rotation (37 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-830749A01 |
SEAL KIT, Gear Housing |
| 0 |
1600-880686T16 |
GEAR HOUSING ASSEMBLY, Complete Comment: (Standard-XX-Long) |
| 1 |
1600-880687T01 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
NSS |
NOT SOLD SEPARATE, Plug |
| 3 |
896847A01 |
CRANK, Shifter |
| 4 |
8M0235940 |
SPOOL ASSEMBLY |
| 5 |
NSS |
NOT SOLD SEPARATE, Spool |
| 6 |
18-469501 |
COTTER PIN |
| 7 |
NSS |
NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 |
43-892595A05 |
GEAR SET, Forward And Pinion |
| 9 |
15-884328A01 |
SHIM SET |
| 10 |
31-8M0142836 |
BEARING ASSEMBLY, Roller |
| 11 |
NSS |
NOT SOLD SEPARATE, Cup |
| 12 |
53-8M0051043 |
RING, Retaining |
| 13 |
12-8M0053823 |
THRUST WASHER |
| 14 |
31-8M0142835 |
BEARING ASSEMBLY, Roller-Tappered |
| 15 |
NSS |
NOT SOLD SEPARATE, Cup |
| 16 |
52-880714T |
CLUTCH |
| 17 |
24-30893 |
SPRING |
| 18 |
17-828356 |
PIN, Detent |
| 19 |
44-888530 |
PROPELLER SHAFT |
| 20 |
17-8M0100263 |
PIN, Cross |
| 21 |
43-8M0142891 |
GEAR ASSEMBLY, Reverse |
| 22 |
880699 |
THRUST RING |
| 23 |
23-891919001 |
SPACER, Thrust |
| 24 |
880696A08 |
CARRIER ASSEMBLY, Bearing |
| 25 |
15-891936A01 |
SHIM SET |
| 26 |
30-8M0142873 |
BEARING, Ball |
| 27 |
26-8M0204700 |
SEAL, Oil |
| 28 |
31-8M0148319 |
BEARING ASSEMBLY, Tapered |
| 29 |
NSS |
NOT SOLD SEPARATE, Cup |
| 30 |
26-8M0204700 |
SEAL, Oil |
| 31 |
25-8M0142840 |
O-RING, (3.850 x .210) |
| 32 |
10-880717A01 |
SCREW/SEAL KIT |
| 33 |
26-8M0204693 |
SEAL |
| 34 |
14-880697 |
KEYED WASHER |
| 35 |
8M2011027 |
RETAINER |
▶Induction Components (46 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
887936T04 |
COVER, Flywheel |
| 2 |
25-8M0190980 |
GROMMET |
| 3 |
8M0035481 |
TUBE OUTLET ASSEMBLY |
| 4 |
32-893389 |
HOSE, (65 Inside Diameter) |
| 5 |
32-893390 |
HOSE, (60 Inside Diameter) |
| 6 |
54-893342 |
CLAMP |
| 7 |
893391 |
HOSE SLEEVE |
| 8 |
19-8M0074364 |
COVER, Hose Clamp End |
| 9 |
54-893342 |
CLAMP |
| 10 |
898022 |
DIPSTICK, Oil |
| 11 |
17-888517 |
PIN |
| 12 |
8M0113515 |
THROTTLE CONTROL ASSEMBLY, Electronic |
| 13 |
8M0113513 |
ISOLATOR |
| 14 |
54-815504256 |
CLAMP, Worm Gear |
| 15 |
10-88552550 |
SCREW, (M6 x 50 MM) Stainless Steel |
| 16 |
884353 |
BRACKET |
| 17 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 18 |
892383T06 |
INTAKE ASSEMBLY, Air |
| 19 |
25-8349851 |
GROMMET |
| 20 |
23-856954 |
BUSHING |
| 21 |
35-893318T02 |
FILTER, Air |
| 22 |
54-895842 |
CLAMP |
| 23 |
27-893317 |
GASKET |
| 24 |
8M0007183 |
RESONATOR |
| 25 |
54-888988027 |
CLAMP |
| 26 |
893314002 |
DUCT, Inlet |
| 27 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
| 28 |
12-65567 |
WASHER, (.265 x .750 x .048) Stainless Steel |
| 29 |
54-888988016 |
CLAMP, (96.5 mm) |
| 30 |
884408A08 |
VALVE KIT, Control - Electric Boost |
| 31 |
887939007 |
PLATE, Boost Valve Mounting |
| 32 |
25-892079 |
O-RING |
| 33 |
10-8M0103806 |
SCREW, (M6 x 20 MM) Stainless Steel |
| 34 |
25-833155 |
GROMMET |
| 35 |
23-8502341 |
BUSHING |
| 36 |
54-859376 |
CLIP |
| 37 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 38 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 39 |
32-887937006 |
HOSE, Front |
| 40 |
54-888988002 |
CLAMP, (57.5 mm), Front Electronic Boost Control |
| 41 |
32-887938003 |
TUBE, Rear |
| 42 |
54-888988004 |
CLAMP, (62.0 mm), Rear Electronic Boost Control |
| 43 |
881879T25 |
SENSOR ASSEMBLY, Pitot |
| 44 |
22-8M0207782 |
FITTING |
| 45 |
54-883066 |
CLIP, (.865) |
| 46 |
54-8589781 |
CLIP, Fuel Hose (Use where Applicable) |
▶Lube Chart (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NOPART |
NO PARTS LIST |
▶Mount Cradle (23 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0109275 |
SEAL |
| 2 |
884887T07 |
MOUNT CRADLE |
| 3 |
8M0060014 |
SEAL |
| 4 |
8M0103708 |
MOUNT, Rear |
| 5 |
8M0103365 |
MOUNT, Front |
| 6 |
10-889745030 |
SCREW, (M12 x 30) |
| 7 |
10-8M0103832 |
SCREW, (M16 x 90) |
| 8 |
25-19565002 |
GROMMET |
| 9 |
10-40011126 |
SCREW, (M6 x 13) Stainless Steel |
| 10 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk), Cut to 35 Inches |
| 11 |
22-895797001 |
FITTING, Telltale |
| 12 |
54-895851 |
CLAMP, (8.00 Inches) |
| 13 |
17-73194 |
PIN, Roll (.125 x 1.12) |
| 14 |
880649002 |
LEVER, Tilt Lock |
| 15 |
24-47968 |
SPRING |
| 16 |
889540A03 |
CLUTCH KIT |
| 17 |
8M0109693 |
BRACKET, Tilt Lock |
| 18 |
889539001 |
PAD, Tilt Lock |
| 19 |
880650003 |
SHAFT, Tilt Lock |
| 20 |
10-889546 |
SCREW, (M5 x 10) |
| 21 |
31-8806641 |
BEARING, (.625 Inch) |
| 22 |
888590002 |
SENSOR |
| 23 |
10-889547 |
SCREW, (M5 x 30) |
▶Oil Pump/Adaptor Plate-Upper (36 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
892126A03 |
ADAPTOR PLATE KIT |
| 2 |
17-892228 |
PIN, Dowel |
| 3 |
19-896951 |
PLUG, (24 mm) |
| 4 |
26-884462 |
SEAL, Water |
| 5 |
25-887930 |
O-RING |
| 6 |
26-8M0033928 |
SEAL, Oil |
| 7 |
21-884422A07 |
PRESSURE RELIEF VALVE, Oil Pump |
| 8 |
8M6002692 |
CHAIN, Oil Pump Drive |
| 9 |
12-892491 |
WASHER |
| 10 |
11-892165 |
NUT |
| 11 |
45-8M0217265 |
DRIVESHAFT, Oil Pump |
| 12 |
25-8M0034912 |
O-RING |
| 13 |
884456 |
SPROCKET, Driven |
| 14 |
884418A1 |
TENSIONER ASSEMBLY, Oil Pump Drive |
| 15 |
884446T04 |
PUMP ASSEMBLY, Oil |
| 16 |
10-892455065 |
SCREW |
| 17 |
892335001 |
DEFLECTOR, Oil |
| 18 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
| 19 |
888819002 |
DRAIN, Cowl |
| 20 |
25-888163 |
GROMMET |
| 21 |
21-884477A01 |
CHECK VALVE ASSEMBLY |
| 22 |
22-8M0092321 |
FITTING, Dump |
| 23 |
25-8M0092943 |
O-RING, (1.239 x .070) |
| 24 |
10-8M0103804 |
SCREW, (M6 x 12 MM) Stainless Steel |
| 25 |
32-8M0087108 |
HOSE, Vent-Lower |
| 26 |
25-884546 |
GROMMET |
| 27 |
888523001 |
CLIP |
| 28 |
32-8M0087118 |
HOSE, Fuel into Fuel Supply Module |
| 29 |
25-884546 |
GROMMET |
| 30 |
27-889617001 |
GASKET |
| 31 |
32-8M0225335 |
HOSE, Fuel-Vent |
| 32 |
8M0175814 |
VENT CANISTER ASSEMBLY |
| 33 |
54-853947 |
CLIP |
| 34 |
8M0126303 |
VALVE ASSEMBLY, Fuel Line Purge |
| 35 |
25-884546 |
GROMMET |
▶Port Cylinder Block Components (18 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
16-8M0022158 |
STUD, (M10 x 1.5) |
| 2 |
16-8M0022162 |
STUD |
| 3 |
8M6003194 |
SENSOR ASSEMBLY, Knock |
| 4 |
10-892086035 |
SCREW, (M10 x 35) |
| 5 |
12-4002319 |
WASHER |
| 6 |
884268A1 |
JET ASSEMBLY, Oil |
| 7 |
54-8M0187145 |
CLAMP, (34.6 mm) |
| 8 |
32-885544002 |
HOSE |
| 9 |
22-896094A01 |
FITTING ASSEMBLY |
| 10 |
25-896699 |
O-RING, (.351 x .072) |
| 11 |
32-85978571 |
TUBING, (52.00 Inches Bulk), To Water Pressure Sensor - Cut to 29 Inches |
| 12 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 13 |
881879T26 |
SENSOR ASSEMBLY, Pressure, Water Pressure |
| 14 |
16-8M0000274 |
STUD, (M8 x 49) |
| 15 |
11-826365 |
NUT, (M8) |
| 16 |
22-885517A05 |
FITTING ASSEMBLY |
| 17 |
25-892077 |
O-RING |
▶Power Trim Components (16 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0118298 |
TRIM CYLINDER KIT |
| 2 |
8M0118299 |
TRIM ROD KIT |
| 3 |
896158A01 |
O-RING KIT |
| 4 |
896159A01 |
PISTON KIT |
| 5 |
896166A01 |
MANIFOLD KIT, Trim |
| 6 |
896165A01 |
CHECK KIT, Trim PO |
| 7 |
896160A01 |
O-RING KIT |
| 8 |
896163A01 |
PUMP KIT, Trim |
| 9 |
35-896164A01 |
TRIM FILTER KIT |
| 10 |
896162A01 |
TRIM NECK KIT |
| 11 |
25-895854A01 |
O-RING KIT |
| 12 |
19-893419 |
CAP KIT |
| 13 |
8M0224397 |
MANUAL RELEASE KIT |
| 14 |
17-893408A01 |
PIN KIT, Trim |
| 15 |
896161A02 |
TRIM MOTOR KIT Comment: SN# 1B245343 & Up |
| 16 |
896167A01 |
RESERVOIR KIT |
▶Power Trim/Steering Cylinder (45 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NSS |
NOT SOLD SEPARATE, Transom Assembly |
| 1 |
880652T |
PEDESTAL |
| 2 |
896500A01 |
STEERING CYLINDER KIT Comment: (Standard) |
| 3 |
8M0168425 |
RETAINER |
| 4 |
12-895853 |
WASHER |
| 5 |
10-88509530 |
SCREW, (M8 x 30) |
| 6 |
22-889552 |
ELBOW Comment: (Standard) |
| 7 |
889550 |
CAP, Bleeder - Vinyl Comment: (Standard) |
| 8 |
25-8M0155530 |
SEAL |
| 9 |
8M0045604 |
SEAL KIT, Steering Cylinder |
| 10 |
22-892524 |
CAP, Fitting Comment: (Standard) |
| 11 |
31-8M0217557 |
BEARING |
| 12 |
26-8M0217558 |
SEAL |
| 13 |
31-8M0217560 |
BEARING |
| 14 |
880654T02 |
HEAD, Steering |
| 15 |
31-8806551 |
BEARING, (1.25 Inch) |
| 16 |
10-885094105 |
SCREW, (M14 x 105) |
| 17 |
12-8M0217559 |
WASHER |
| 18 |
896120T |
PLATE, Deflector (Silver) |
| 19 |
12-8M0161430 |
WASHER |
| 20 |
10-4010720 |
SCREW, (M8 x 20) |
| 21 |
8M0220571 |
TUBE, Steering |
| 22 |
17-885111 |
PIN, Dowel (.375 x .875) |
| 23 |
880658T03 |
POWER TRIM ASSEMBLY Comment: SN# 1B245343 & Up |
| 24 |
25-895854 |
O-RING |
| 25 |
97-893404 |
ANODE |
| 26 |
10-889543016 |
BOLT |
| 27 |
10-88510450 |
SCREW |
| 28 |
12-889549 |
WASHER |
| 29 |
97-880653 |
ANODE |
| 30 |
8M0217564 |
COVER Comment: (Counter Rotation) |
| 31 |
10-4000327 |
SCREW, (M6 x 14) |
| 32 |
12-72397 |
WASHER |
| 33 |
880665T01 |
ARM, Steering |
| 34 |
17-821539 |
PIN, Trilobe |
| 35 |
53-895304 |
RING, Retaining |
| 36 |
31-8806641 |
BEARING, (.625 Inch) |
| 37 |
17-895390 |
TILT PIN |
| 38 |
53-8M0038931 |
RING, Retaining |
| 39 |
10-8M0038370 |
SCREW, (.500-20 x 5.500) |
| 40 |
12-8M0204648 |
WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 41 |
12-8M0204704 |
WASHER |
| 42 |
11-82671117 |
NUT, (.500-20) |
| 43 |
17-8M0146467 |
PIN |
| 44 |
NSS |
NOT SOLD SEPARATE, Decal-Serial Overlaminate |
▶Powerhead Gasket Set Components (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
25-8M0034912 |
O-RING, Oil Pump Driveshaft |
▶Rear Cowl (24 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
100-885358T02 |
COWL, Rear |
| 2 |
17-888961A01 |
PIN ASSEMBLY |
| 3 |
11-892233 |
NUT, (M6) Stainless Steel |
| 4 |
885360 |
IDLE RELIEF |
| 5 |
893343001 |
SEAL, Port (Port) |
| 6 |
893344001 |
SEAL, Starboard (Starboard) |
| 7 |
885356T03 |
INTAKE, Air - Port (Port) |
| 8 |
885357T03 |
INTAKE, Air - Starboard (Starboard) |
| 9 |
27-892315 |
GASKET |
| 10 |
8M0043266 |
SEAL |
| 11 |
25-888957 |
O-RING |
| 12 |
8M0224266 |
TETHER |
| 13 |
87-8M0235191 |
SWITCH, Trim |
| 14 |
8M0215105 |
PLUG, Flush |
| 15 |
11-892233 |
NUT, (M6) Stainless Steel |
| 16 |
12-8M0214930 |
WASHER |
| 17 |
22-885361A01 |
FITTING ASSEMBLY, Flush |
| 18 |
10-4006731 |
SCREW, (M6 x 16) |
| 19 |
54-858951A01 |
CLAMP KIT |
| 20 |
12-8M0214930 |
WASHER |
| 21 |
10-4006731 |
SCREW, (M6 x 16) |
| 22 |
11-892233 |
NUT, (M6) Stainless Steel |
| 23 |
8M0214997 |
ADAPTOR |
| 24 |
25-8M0214987 |
GROMMET |
▶Service/Support Material (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
37-895282A06 |
DECAL, EPA Label Information |
▶Starboard Cylinder Block/Oil Cooler (36 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
892404A05 |
DEFLECTOR ASSEMBLY, Water |
| 2 |
22-885518A02 |
FITTING ASSEMBLY |
| 3 |
25-62701 |
O-RING |
| 4 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
| 5 |
54-888988011 |
CLAMP, (38.1 mm) |
| 6 |
32-888930003 |
HOSE |
| 7 |
54-8M0187145 |
CLAMP, (34.6 mm) |
| 8 |
8M0174561 |
THERMOSTAT ASSEMBLY |
| 9 |
25-8M0005958 |
O-RING |
| 10 |
54-8M0204719 |
CLAMP, (36.1 mm) |
| 11 |
32-892865 |
HOSE, Thermostat |
| 12 |
54-888988007 |
CLAMP, (42.5 mm) |
| 13 |
35-8M0062950 |
FILTER, Fuel |
| 14 |
35-8M0122423 |
FILTER, Fuel |
| 15 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 16 |
22-892356 |
CONNECTOR |
| 17 |
19-863156 |
GRAB TAB |
| 18 |
32-8M0150200 |
HOSE, Fuel to Lift Pump |
| 19 |
892147001 |
BRACKET |
| 20 |
10-8M0103824 |
SCREW, (M10 x 85) |
| 21 |
10-8M0103820 |
SCREW, (M10 x 105) |
| 22 |
32-8M0043788 |
HOSE, Fuel Inlet |
| 23 |
8M0132390 |
MODULE ASSEMBLY, Intergrated Oil - Complete |
| 24 |
35-877769K01 |
FILTER, Oil |
| 25 |
8M0046694 |
HOUSING ASSEMBLY, Intergrated Oil Module |
| 26 |
10-8M0041014 |
SCREW, (M6 x 18) |
| 27 |
27-8M0034568 |
GASKET |
| 28 |
880640A06 |
THERMOSTAT/GUIDE KIT |
| 29 |
880640508 |
THERMOSTAT |
| 30 |
892801T53 |
OVERHAUL KIT |
| 31 |
27-8M0034568 |
GASKET |
| 32 |
25-8M0071635 |
O-RING KIT |
| 33 |
895032 |
STRAP |
| 34 |
10-8M0041014 |
SCREW, (M6 x 18) |
| 35 |
10-8M0103807 |
SCREW, (M6 x 25 MM) Stainless Steel |
▶Starter Motor/Electrical Cable Bracket Mounting (24 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-895247A06 |
POWERHEAD ASSEMBLY |
| 1 |
50-892339T01 |
STARTER MOTOR ASSEMBLY |
| 2 |
NSS |
NOT SOLD SEPARATE |
| 3 |
43-880805A1 |
GEAR KIT |
| 4 |
809463A1 |
SOLENOID KIT |
| 5 |
23-8M0034918 |
COLLAR |
| 6 |
8M0043276 |
STOP |
| 7 |
NSS |
NOT SOLD SEPARATE, Decal-Waring-High Voltage |
| 8 |
84-93388A1 |
CABLE ASSEMBLY, (6.00 Inches) Black |
| 9 |
10-69035 |
SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 10 |
13-8M0204647 |
LOCKWASHER, (.312) |
| 11 |
11-400213 |
NUT, (M8) Stainless Steel |
| 12 |
13-400255 |
LOCKWASHER, (M5) |
| 13 |
11-400211 |
NUT, (M5) Stainless Steel |
| 14 |
889666A01 |
BRACKET, Electrical Cable |
| 15 |
23-8502341 |
BUSHING |
| 16 |
25-833155 |
GROMMET |
| 17 |
54-879962 |
CLIP |
| 18 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 19 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 20 |
23-8502341 |
BUSHING |
| 21 |
10-8M0103814 |
SCREW, (M8 x 35 MM) |
| 22 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 23 |
25-833155 |
GROMMET |
▶SuperCharger (11 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0103744 |
SUPERCHARGER KIT |
| 2 |
8M0148668 |
SENSOR ASSEMBLY |
| 3 |
25-896699 |
O-RING, (.351 x .072) |
| 4 |
888947A05 |
DUCT KIT, Inlet |
| 5 |
27-888947501 |
GASKET |
| 6 |
888947A04 |
OUTLET DUCT KIT |
| 7 |
27-888947504 |
GASKET |
| 8 |
10-888947502 |
BOLT |
| 9 |
23-847803A02 |
BUSHING/GASKET KIT |
| 10 |
10-8M0103820 |
SCREW, (M10 x 105) |
| 11 |
56762 |
TIE STRAP, (4.00 Inches) |
▶Tools (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
889283A01 |
TOOL KIT, Fuel Priming |
▶Top Cowl (19 parts)
| Ref |
OEM Part # |
Part Name |
| - |
37-895255A07 |
DECAL SET Comment: (Mariner 275) |
| 1 |
100-8M0050000 |
TOP COWL ASSEMBLY Comment: (Mariner) |
| 2 |
895838T |
CAP, Air Dam Comment: (Mariner) |
| 3 |
888971 |
FRONT LATCH RECEIVER |
| 4 |
8M0111178 |
SEAL, Top Cowl |
| 5 |
888951 |
CABLE |
| 6 |
17-888959 |
PIN, Hinge |
| 7 |
888956 |
LATCH, Hand Lever |
| 8 |
24-895373 |
SPRING |
| 9 |
888955 |
LINK, Latch Connecting |
| 10 |
18-26953 |
COTTER PIN |
| 11 |
12-89302 |
WASHER, (.203 x .406 x .040) |
| 12 |
888952 |
LINKAGE ARM |
| 13 |
24-888953 |
SPRING |
| 14 |
17-822417 |
PIN |
| 15 |
10-888950020 |
SCREW, (M4 x 20 mm) (M4 x 1.75) |
| 16 |
895839 |
APPLIQUE, Port (Port) Comment: (Mariner) |
| 17 |
895840 |
APPLIQUE, Starboard (Starboard) Comment: (Mariner) |
| 18 |
10-4010610 |
SCREW, (M6 x 10) Stainless Steel |
▶Upper Shift Components (22 parts)
| Ref |
OEM Part # |
Part Name |
| - |
888994T04 |
BRACKET ASSEMBLY, Front Mount |
| 1 |
NSS |
NOT SOLD SEPARATE, Bracket |
| 2 |
23-892417 |
BUSHING |
| 3 |
23-8M0047763 |
SPACER |
| 4 |
885506001 |
SHIFT SHAFT |
| 5 |
889727001 |
BELL CRANK |
| 6 |
17-25319 |
PIN, (.125 x 0.75 Inches) |
| 7 |
25-833155 |
GROMMET |
| 8 |
87-8M0207794 |
SWITCH |
| 9 |
10-88075020 |
SCREW, (M3 x 20) |
| 10 |
23-85999 |
BUSHING |
| 11 |
8M0124413 |
SHIFT ACTUATOR |
| 12 |
10-8855091 |
SCREW |
| 13 |
18-885512 |
COTTER PIN |
| 14 |
12-885511003 |
WASHER |
| 15 |
17-895770 |
Pin, Pivot |
| 16 |
10-8M0207826 |
SCREW, (M10 x 155) |
| 17 |
10-8M0103802 |
SCREW, (M14) |
| 18 |
11-401386 |
NUT, (M6) Stainless Steel |
| 19 |
23-97896 |
BUSHING |
| 20 |
885505 |
LINK, Shift Shaft |
| 21 |
8M0180097 |
SHIFT SHAFT, (XX-Long) Comment: (XX-Long) |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 275 VERADO (4-STROKE)(6 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
-
Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
-
Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
