> > > >
Water Pressure Sensor 8M6000626 – Fits Mercury / MerCruiser

Water Pressure Sensor 8M6000626 – Fits Mercury / MerCruiser

Vendor: JLM Marine
Availability: In Stock
Product Type: Sensor
$89.77
$89.77
Subtotal: $89.77

Free Shipping

Free standard shipping on all orders under 1 KG

Worry-Free Returns

Learn More.
Water Pressure Sensor 8M6000626 – Fits Mercury / MerCruiser

Water Pressure Sensor 8M6000626 – Fits Mercury / MerCruiser

$89.77
Description

How to Match This Part

This aftermarket engine water pressure sensor replaces Mercury Marine 8M6000626 and the current catalog reference 881879T11, along with the earlier numbers those references supersede. It is a 0–100 PSI pressure sender used to report cooling-system water pressure on compatible Mercury, Mariner, and MerCruiser applications. The same sensor family can also appear in oil or pitot pressure positions on some engines, so the number on the part you remove is the decisive check.

Match this part in this order:
1. Number stamped on the sensor you remove — look for 8M6000626, 881879T11, or one of the verified earlier numbers below
2. Engine model and serial number — Mercury outboards: plate on the transom bracket or cowl; MerCruiser: engine block, flame-arrestor cover, or near the ignition-coil bracket
3. Physical form — threaded metal pressure port, hex tool body, and molded electrical connector with locking tab (compare with the product images)

Do not confuse this sender with Verado-style water-pressure assemblies that use a different mounting and tube fitting, or with MAP / intake-manifold pressure sensors. If the connector, thread, or body shape differs from the images, do not install this part even when the horsepower overlaps.

Part Number Cross-Reference

Use these verified numbers to confirm you have the correct pressure sensor. Brand names and OEM numbers are for identification only.

Type Brand Part Number Notes
OEM Mercury Marine 8M6000626 Primary reference (often printed on the sensor body)
OEM Mercury / Quicksilver 881879T11 Current catalog water pressure sensor (0–100 PSI)
OEM Mercury Marine 881879A6 Earlier number; superseded by 881879T11
OEM Mercury Marine 881879011 Earlier 0–100 PSI pressure sensor; superseded toward 881879T11
OEM Mercury Marine 859210T Earlier related number replaced by 881879T11
OEM Mercury Marine 859210 Earlier related number replaced by 881879T11
OEM Mercury Marine 859604A1 Earlier related assembly in the same 0–100 PSI replacement chain

This is an aftermarket part manufactured by JLM Marine. It is not sold as a genuine Mercury Marine, Mariner, Quicksilver, or MerCruiser component.

Compatible Engine Models

Confirm the OEM number on the sensor you remove, then match your engine model and serial number. For Mercury outboards use the Mercury Serial Number Guide and Mercury Parts Diagrams. Mariner-badged engines that use the same Mercury OEM number are covered the same way. MerCruiser identification is on the engine, not on an outboard transom bracket.

Brand Engine Family Coverage Notes
Mercury / Mariner Select FourStroke and 2-stroke outboards Select 75–300 HP Includes select DFI, Jet, Pro XS, and Sport XS applications — confirm by OEM number and parts diagram
MerCruiser Sterndrive / inboard V6 & V8 MPI 305, 350, 377, 496, 502 CID 0–100 PSI water / oil / pitot pressure applications — confirm serial and sensor location
MerCruiser 4.3L / 5.0L / 5.7L / 6.2L MPI Alpha & Bravo families See engine parts listing Catalog Where Used lists multiple serial blocks — verify yours before ordering
MerCruiser 350 MAG / 377 MAG / 496 MAG / 8.2L Mag & related MPI See engine parts listing Confirm the pressure-sensor callout in the engine-specific diagram
Mercury Select DFI / Pro XS outboards (e.g. 200XS / 200 Pro XS 3.0L) Serial-specific Match the OEM number on the sensor and the model parts diagram

Technical Specifications

Specification Value
Product type Engine water pressure sensor (0–100 PSI pressure sender)
Primary OEM reference 8M6000626
Current catalog reference 881879T11
Pressure range 0–100 PSI
Monitoring application Cooling-system water pressure (also used for oil / pitot pressure on some engines)
Physical interface Male threaded pressure port, hex wrench body, molded electrical connector with locking tab
Condition Brand-new aftermarket production — not remanufactured

Installation Guide

  1. 1Shut the engine down, remove the key, allow it to cool, and disconnect the negative battery cable before touching the sensor or harness.
  2. 2Locate the water pressure sensor using the engine-specific service information, then confirm the original part number before removal.
  3. 3Press the locking tab and unplug the harness connector without pulling on the wires. Inspect the plug for corrosion or moisture.
  4. 4Unscrew the old sensor with a correctly sized wrench on the hex flat only. Never twist on the plastic connector housing. Keep debris out of the pressure passage.
  5. 5Compare thread, hex body, and connector shape with the product images. Start the new sensor by hand to avoid cross-threading, then tighten to the torque in your Mercury / MerCruiser service manual. Apply sealant only if the manual requires it.
  6. 6Reconnect the plug and battery, run the engine per the service procedure, and confirm a stable pressure reading with no leakage at the sensor.

Note: Professional installation is recommended for cooling-system pressure sensors.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Match the number on the sensor you remove to 8M6000626, 881879T11, or one of the verified earlier numbers in the cross-reference table. Then confirm the engine model and serial number in the parts catalog, and compare the thread, hex body, and connector with the product images.

My original sensor is marked 881879A6 or 881879011. Can I still use this one? +

Yes, when the physical form matches. Those earlier numbers are in the replacement chain that leads to 881879T11 / 8M6000626. Always confirm connector and thread shape before installing.

Is this a water pressure sensor or an oil pressure sensor? +

This listing is configured as an engine water pressure sensor per the Mercury Quicksilver 881879T11 application. The same 0–100 PSI sender family is also used for oil or pitot pressure on some Mercury / MerCruiser engines. Match by the OEM number and installation location on your engine.

Is this an OEM or aftermarket part? +

This is an aftermarket replacement manufactured by JLM Marine. It is not a genuine Mercury Marine, Mariner, Quicksilver, or MerCruiser part. OEM numbers are listed only for cross-matching.

Important Notes

  • Verify that the product images and the number on your original sensor match this family (8M6000626 / 881879T11 and verified earlier numbers), including thread, hex body, and connector. If anything differs, do not install the sensor even if the engine family appears in the table.
  • This is an aftermarket replacement and is not a genuine Mercury Marine OEM component.
  • Do not invent a torque value or sealant procedure — follow the engine-specific service manual.
  • Professional installation and a post-installation leak and signal check are recommended.

Why Choose JLM MARINE?

  • Precision Fit: Cross-referenced to Mercury 8M6000626 / 881879T11 and the verified earlier numbers listed above.
  • Quality Control: Each batch is inspected for dimensional consistency and workmanship.
  • Direct from Manufacturer: Aftermarket marine sensors engineered for reliable cooling-system pressure feedback on compatible Mercury, Mariner, and MerCruiser engines.
Shipping

We can ship to virtually any address in the world with free shipping available for most regions.

For our typical US and Canadian customers , our shipping timeframes are as follows:

  • Amazon FBA: orders will be delivered within 1-5 business days after placing the order (during certain special periods such as major promotions, Christmas, etc., the delivery time of Amazon FBA may be affected).
  • US warehouse shipment: orders will be delivered within 5 days after placing the order.
  • China warehouse shipment: orders will be delivered about 12 days after placing the order.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

About JLM Marine

Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.

As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.

We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.

Search
Add to garage

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Search
Add to garage

Related Products

Example product title
$89.77
$89.77
Example product title
$89.77
$89.77
Example product title
$89.77
$89.77
Example product title
$89.77
$89.77
Example product title
$89.77
$89.77
Example product title
$89.77
$89.77

Recently Viewed Products