Spark Plug Wires (6") – Fits Johnson/Evinrude V4-V6 Outboard Motors 10-235 HP (Replaces 582134, 582135, 582365)

Spark Plug Wires (6") – Fits Johnson/Evinrude V4-V6 Outboard Motors 10-235 HP

These 6-inch spark plug wires are designed for a wide range of Johnson/Evinrude V4-V6 CROSSFLOW outboard motors (10-235 HP) manufactured in the 1980s and 1990s. They provide a reliable, high-performance connection between the ignition coil and spark plugs.

This kit serves as a direct replacement for multiple OEM and aftermarket part numbers, simplifying maintenance and ensuring broad compatibility for various engine models within this series.

• Engineered for V4-V6 CROSSFLOW engines, ensuring precise fit and function.
• Constructed with a durable silicone jacket and stainless steel conductors for longevity and optimal spark delivery.
• Package contains a set of 2 spark plug wires.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here’s a guide to help you identify your engine’s serial/model: Johnson/Evinrude Serial Number Guide.

Technical Specifications

Package Contents

• 2 x Spark Plug Wire (Replaces 582134, 582135, 582365)

Installation Guide

1. Safety First: Ensure the engine is completely cool and turned off. Disconnect the negative battery terminal to prevent accidental starting.
2. One by One: Replace one wire at a time to avoid mixing up the firing order. Start with the easiest wire to access.
3. Remove the Old Wire: Firmly grasp the boot at the spark plug, twist gently to break the seal, and pull it straight off. Do not pull on the wire itself. Repeat on the distributor/coil pack side.
4. Match and Prep: Compare the new wire to the old one to confirm it's the correct length. Apply a small amount of dielectric grease to the inside of both boots of the new wire to improve sealing and prevent corrosion.
5. Install the New Wire: Route the new wire along the same path as the original. Push the boot onto the ignition coil/distributor pack until you feel or hear it click into place.
6. Connect to Spark Plug: Push the other boot firmly over the spark plug until it is fully seated. Give it a gentle tug to ensure it is secure.
7. Repeat: Continue this process for all remaining spark plug wires.
8. Final Check: Once all wires are replaced, reconnect the battery terminal. Start the engine to ensure it runs smoothly without misfires.

Troubleshooting & FAQ

Q: How do I confirm these wires fit my 1989 Evinrude V6 engine?
A: These wires are specifically designed for Johnson/Evinrude V4-V6 CROSSFLOW engines made between the 1980s and 1990s. The best way to confirm fitment is to match your existing part number to those listed in our cross-reference table, such as 582134, 582135, or 582365. Our Johnson/Evinrude serial number guide can also help you identify your exact model.

Q: What are the signs my old spark plug wires are failing?
A: Common symptoms include noticeable engine misfires (especially under load), rough idling, a drop in horsepower, reduced fuel economy, or visible cracking, burning, or corrosion on the wire jacket or boots.

Q: How are these different from the original OEM wires?
A: Our aftermarket wires are built to meet or exceed OEM specifications. They feature a high-quality silicone jacket and stainless steel conductors, ensuring excellent durability, heat resistance, and electrical conductivity comparable to the original parts.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.