> > > >
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042

Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042

Vendor: JLM Marine
Availability: In Stock
Product Type: Flexible Rubber Impeller
$52.80
$52.80
Subtotal: $52.80

Free Shipping

Free standard shipping on all orders under 1 KG

Worry-Free Returns

Learn More.
Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042

Flexible Rubber Water Pump Impeller 17935-0001 – 12 Blade Neoprene 95 mm Spline – Fits CAT 5L6042

$52.80
Description

How to Match This Part

This is a flexible rubber raw water pump impeller. It sits inside the pump housing behind the cover plate and is driven by a splined shaft. It replaces the primary original part number Jabsco 17935-0001, and is also supplied against JMP 8100-01, Johnson 09-819B and DJ 003-1201.

Match this part by checking your engine in this order:
1. Original impeller part number (stamped on the old impeller or listed in the pump section of your parts catalog)
2. Blade count (this listing is 12 blades, not the 9-blade 836-0001 / 8000-01)
3. Drive type (this listing is a 12-spline hub, 25 mm bore)
4. Pump model (cast or labelled on the pump body)

Identify it physically before ordering. This impeller has twelve vanes moulded in black neoprene around a machined brass 12-spline insert. JMP 8100-01 is 95 mm diameter, 63 mm width and 25 mm bore. Jabsco Profile Q. It shares that envelope with 9-blade 8000-01 / 836-0001; count twelve blades before ordering. It is not a double-flat 8001-01.

  • ✓ Primary OEM: Jabsco 17935-0001
  • ✓ Product form: 12-blade neoprene impeller, brass 12-spline insert, 63 mm width, 25 mm bore
  • ✓ Fitment: part number, then blade count, then drive type

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. The product photo is a genuine Jabsco 17935-0001-P kit card. This listing is the impeller only.

Type Brand Part Number Notes
OEM Jabsco Pump 17935-0001 Primary reference. 12-blade neoprene, 12-spline, Profile Q
OEM SPX Flow Johnson Pumps 09-819B Johnson 12-blade equivalent
OEM JMP Pump 8100-01 JMP 12-blade 12-spline equivalent
OEM DJ Pump 003-1201 12-blade spline equivalent
OEM Cummins Onan 556850 Source-sheet Onan number. Same number also appears on 9-blade 8000-01 sheets; count 12 blades
OEM Caterpillar 5L6042 CAT raw-water pump impeller
OEM Caterpillar 5N9360 CAT raw-water pump impeller
OEM Caterpillar 1W9046 CAT raw-water pump impeller
OEM Northern Lights 25-14802 Northern Lights impeller number
OEM Perkins 7054 Source-sheet Perkins number
Other brand Industry interchange K-1050 Source-sheet other-brand number
Other brand Industry interchange 888-1050 Source-sheet other-brand number for this SKU

Compatible Engine Models

Confirm the original impeller number and count twelve blades on a 25 mm 12-spline hub. Do not assume every CAT 3304 / 3306, Volvo TAMD or Cummins NT855M uses this part. Early lower-speed Volvo TMD pumps used the 9-blade 8000-01 of the same size.

Brand Engine / Pump Model Original Part No. Notes
Jabsco / Johnson / JMP / DJ Pumps specified for 17935-0001, 09-819B, 8100-01 or 003-1201 17935-0001, 09-819B, 8100-01, 003-1201 12-blade, 12-spline, 95 × 63 × 25 mm
Cummins Onan NT855M when the parts list calls for 556850 NT855M, 556850 Match the original number and count 12 blades. 556850 also appears on 9-blade 8000-01 sheets
Caterpillar Engines whose parts list calls for 5L6042, 5N9360 or 1W9046 5L6042, 5N9360, 1W9046 Match the original number rather than a 3304 / 3306 dump
Northern Lights / Perkins Engines whose parts list calls for 25-14802 or 7054 25-14802, 7054 Match the original number

Technical Specifications

Specification Value
Part type Flexible rubber impeller, raw water pump
Number of blades 12
Impeller diameter (A) 95 mm
Impeller width / depth (B) 63 mm
Shaft bore diameter (C) 25 mm
Insert / drive type 12-spline
Insert material Machined brass
Vane material Neoprene rubber
Jabsco profile Profile Q

Package Contents

This listing is for the impeller only, as shown in the impeller in the product images. Please refer to the part number cross-reference table to confirm component details.

Cover gasket, O-ring and lubricant are not included. The product photo is a genuine Jabsco 17935-0001-P kit card. JMP 8100-01K adds cover gaskets (GAK0007 / GAK000701), an O-ring (ORG0015) and lubricant.

Installation Guide

  1. 1 Stop the engine, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.
  2. 2 Remove the cover plate screws and lift off the cover. Keep the screws and the old gasket together so you can compare the seal size when reassembling.
  3. 3 Note the spline orientation, then grip the brass insert and pull the old impeller straight off. Recover any broken vane pieces from the downstream cooling circuit before continuing.
  4. 4 Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.
  5. 5 Align the spline in the brass insert with the pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all twelve vanes lay over the same way.
  6. 6 Refit the cover plate with a serviceable gasket, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm a solid stream of cooling water and no leaks at the cover.

Note: Professional installation is recommended to ensure safety and optimal performance.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Start from the original impeller number. If the old part is Jabsco 17935-0001, JMP 8100-01, Johnson 09-819B, DJ 003-1201, CAT 5L6042 / 5N9360 / 1W9046, Northern Lights 25-14802 or Perkins 7054, and the brass hub is a 25 mm 12-spline about 63 mm wide on a 95 mm 12-blade impeller, this part is the correct size.

Is this the same as 836-0001 / 8000-01? +

No. Those numbers are the same outer size with 9 blades. This listing is 12 blades. Count the blades before ordering. Early lower-speed Volvo TMD pumps used the 9-blade part.

Will this fit every CAT 3304 / 3306 or Volvo TAMD? +

No. Only engines whose parts list calls for one of the original numbers in the cross-reference table. Match the original number.

What are the signs that my impeller needs replacing? +

The usual symptoms are a weak or intermittent stream of cooling water, rising engine temperature, and vanes that are cracked, flattened, hardened or missing on inspection. Flexible impellers are a wear item; inspect on a fixed service interval rather than waiting for failure.

Is this a kit or just the impeller? +

This listing is the impeller only. The product photo is a genuine Jabsco 17935-0001-P kit card. JMP 8100-01K is a kit number that adds gaskets, an O-ring and lubricant. Kit extras are not included.

Is this an OEM or aftermarket part? +

This listing is an aftermarket replacement part and is not an OEM component. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost? +

We offer fast global shipping, typically 5–15 days worldwide, and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy? +

This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window for unused items in original condition; please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • The impeller is supplied on its own. Cover seals and lubricant must be ordered separately if your service procedure requires them.
  • This is a 12-blade, 95 mm 12-spline impeller, 63 mm wide with a 25 mm bore. It will not fit 9-blade 8000-01 / 836-0001 or double-flat 8001-01 of the same outer size.
  • Never run the pump dry. Even a few seconds without water will damage the neoprene vanes.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Shipping

We can ship to virtually any address in the world with free shipping available for most regions.

For our typical US and Canadian customers , our shipping timeframes are as follows:

  • Amazon FBA: orders will be delivered within 1-5 business days after placing the order (during certain special periods such as major promotions, Christmas, etc., the delivery time of Amazon FBA may be affected).
  • US warehouse shipment: orders will be delivered within 5 days after placing the order.
  • China warehouse shipment: orders will be delivered about 12 days after placing the order.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

About JLM Marine

Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.

As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.

We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.

Search
Add to garage

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Search
Add to garage

Related Products

Example product title
$52.80
$52.80
Example product title
$52.80
$52.80
Example product title
$52.80
$52.80
Example product title
$52.80
$52.80
Example product title
$52.80
$52.80
Example product title
$52.80
$52.80

Recently Viewed Products