Water Pump Impeller Kit – Fits Honda BF4/BF5/BF9.9A/BF15A Four-Stroke Outboards

Water Pump Impeller Kit – Fits Honda BF4/BF5/BF9.9A/BF15A Four-Stroke Outboards

This water pump impeller service kit is designed for Honda four-stroke outboard engines, including BF4, BF4.5, BF5, BF9.9A, and BF15A models.

It serves as a direct replacement for Honda part numbers 06192-ZV4-000 and 06211-ZV4-505, as well as Sierra 18-3280 and Mallory 9-45301.

• This listing includes multiple kit variations to service different engine groups.
• Provides essential components for routine water pump maintenance or repair.
• Engineered for direct, hassle-free installation.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

Important: This product is sold as multiple distinct kits. The parts you receive depend on the specific kit you select. Please verify the correct kit for your engine model and part number before ordering.

Kit for BF9.9A / BF15A (replaces 06192-ZV4-000):

• 1 x Impeller (19210-ZV4-013)
• 1 x Water Pump Gasket (19233-ZV4-003)
• 1 x Cotter Pin (90758-ZV4-000)

Maintenance Kit for BF4 / BF4.5 / BF5 (replaces 06211-ZV1-505):

• 1 x Fuel Filter (16910-GB2-005)
• 1 x Spark Plug (98079-55846)
• 1 x Impeller Kit (06192-ZV1-C00)
• 1 x Pin (90758-ZV1-000)
• 1 x Thermostat Gasket (19351-ZV1-000)

Maintenance Kit for BF9.9A / BF15A (replaces 06211-ZV4-505):

• 1 x Fuel Filter (06910-ZV4-015)
• 2 x Spark Plugs (98066-56716)
• 1 x Impeller Kit (replaces 06192-ZV4-000)
• 1 x Cotter Pin (90758-ZV4-000)
• 1 x Thermostat Gasket (19351-ZV4-610)

Installation Guide

1. Disconnect the spark plug wires and shift the outboard into neutral.
2. Locate and remove the bolts securing the gearcase (lower unit) to the engine's upper section.
3. Carefully slide the gearcase down and away from the outboard. Watch for the driveshaft and shift shaft.
4. Unscrew the bolts on the water pump housing and lift the housing off.
5. Remove the old impeller, key, and gaskets. Clean any corrosion or debris from the housing and wear plate.
6. Install the new gasket(s) and wear plate.
7. Slide the new impeller onto the driveshaft while turning the shaft clockwise to bed the fins correctly. Insert the key.
8. Reinstall the water pump housing and tighten the bolts to the manufacturer's specified torque.
9. Apply marine grease to the driveshaft splines and guide the gearcase back into position.
10. Secure the gearcase bolts and reconnect the spark plug wires. Test the engine in water to confirm proper water stream from the "tell-tale" outlet.

Troubleshooting & FAQ

Q: How do I know which of these kits is correct for my engine?
A: Please check the "Compatible Engine Models" and "Package Contents" sections carefully. Match the OEM part number listed for your engine model (e.g., 06192-ZV4-000, 06211-ZV4-505) with the corresponding kit description to ensure you select the correct set of parts.

Q: What are common signs that a water pump impeller needs replacement?
A: A weak or non-existent water stream from the engine's tell-tale outlet is the most common sign. Other symptoms include engine overheating alarms or the engine running hotter than usual.

Q: How often should I replace the impeller?
A: For preventative maintenance, it is recommended to inspect and/or replace the water pump impeller every 1-2 years or every 100-200 hours of use, depending on operating conditions (e.g., saltwater vs. freshwater).

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.