Customer Service: info@jlm-marine.com
Free shipping. No Minimum Purchase
Couldn't load pickup availability
Free standard shipping on all orders
Most new, unused items may be returned within 7 days of delivery, subject to our Returns Policy. A 20% processing/restocking fee may apply for returns that are not the result of our error. Original shipping charges are non-refundable.
If the return is due to our mistake (incorrect or defective item), we will cover the return shipping cost and issue a full refund.
EU customers are entitled to a 14-day cooling-off period in accordance with applicable consumer protection regulations. Certain exclusions may apply.
Refunds are issued after the returned item is received and inspected. Processing times may vary depending on shipping transit and payment provider handling, but most refunds are completed promptly.
To request a return, please contact us at info@jlm-marine.com with your order number for return authorization. For full terms, conditions, and exclusions, please refer to our complete Returns & Refunds Policy page.
This aftermarket oxygen sensor replaces Honda Marine 35655-ZY3-003 (also cataloged as 35655-ZY3-013). It mounts in the exhaust manifold on selected Honda BF175, BF200, and BF225 four-stroke V6 outboards and reports exhaust oxygen so the ECM can trim fuel.
Match this part in this order:
1. OEM number on the removed sensor or in your Honda parts catalog (35655-ZY3-003 or 35655-ZY3-013)
2. Model family — BF175, BF200, or BF225 in the table below
3. Physical connector and thread — compare the product images with the sensor you remove before ordering
This is not Honda 35655-ZY3-C01 / 35655-ZZ5-004 (the later small-body oxygen sensor used on some later BF175/BF200/BF225 units). If your catalog or removed sensor shows C01 or ZZ5-004, order that listing instead.
Use this table to confirm equivalent part numbers before you order.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| OEM | Honda Marine | 35655-ZY3-003 | Primary reference |
| OEM | Honda Marine | 35655-ZY3-013 | Related Honda oxygen-sensor number for the same applications |
| Aftermarket | Sierra | 18-7657 | Direct aftermarket replacement |
| Aftermarket | Mallory | 9-32200 | Interchangeable aftermarket equivalent |
Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Honda component.
Confirm your engine model family below, then match the OEM number on the sensor you remove. On Honda outboards the identification plate is typically on the stern bracket. Year and serial cut-offs vary by catalog revision, so OEM number match is the safest check.
| Engine Model | HP | Notes |
|---|---|---|
| BF175 | 175 | 4-stroke V6; when catalog/OEM shows 35655-ZY3-003 or 35655-ZY3-013 |
| BF200 | 200 | 4-stroke V6; when catalog/OEM shows 35655-ZY3-003 or 35655-ZY3-013 |
| BF225 | 225 | 4-stroke V6; when catalog/OEM shows 35655-ZY3-003 or 35655-ZY3-013 |
Do not order this sensor for engines that specify Honda 35655-ZY3-C01 or 35655-ZZ5-004.
| Specification | Value |
|---|---|
| Part type | Oxygen (O2 / lambda) sensor for programmed fuel injection |
| Primary OEM number | 35655-ZY3-003 |
| Related Honda OEM | 35655-ZY3-013 |
| Mounting | Threaded into the exhaust manifold |
| Engine type | Honda Marine 4-stroke V6 outboard (BF175 / BF200 / BF225 family) |
| Brand positioning | Aftermarket replacement — not genuine Honda OEM |
Allow the engine and exhaust manifold to cool fully. Disconnect the battery negative cable before unplugging the sensor connector.
Note the harness routing and clip positions, then unplug the connector. Unscrew the old sensor from the exhaust manifold with the correct oxygen-sensor socket or wrench on the hex — do not crush the lead.
Confirm the OEM number (35655-ZY3-003 or 35655-ZY3-013) and connector layout match this assembly and the product images. Thread the new sensor in by hand to avoid cross-threading, then tighten on the hex per the Honda service manual for your model.
Reconnect the plug until it locks, restore any harness clips, reconnect the battery, start the engine, and confirm there is no exhaust leak at the bung and no oxygen-sensor fault.
Note: Professional installation is recommended to ensure safety and optimal performance.
This is an aftermarket JLM Marine replacement matched to Honda 35655-ZY3-003 / 35655-ZY3-013. It is not a genuine Honda part.
Yes when your Honda catalog or removed sensor calls for 35655-ZY3-013 or 35655-ZY3-003. Still compare the connector and thread against the product images.
No. 35655-ZY3-C01 (and related 35655-ZZ5-004) is a different later oxygen-sensor family. Order only if your removed sensor or catalog calls for 35655-ZY3-003 or 35655-ZY3-013.
Published year cut-offs differ across catalogs, so this listing does not print a year range. Match the OEM number on the sensor you remove, then confirm the connector against the product images.
We can ship to virtually any address in the world with free shipping available for most regions.
For our typical US and Canadian customers , our shipping timeframes are as follows:
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Thanks for subscribing!
This email has been registered!