Fuel Filter Element – Fits Yamaha 150-250 HP & Mercury/Suzuki 75-300 HP (Replaces 65L-24563-00-00)

Fuel Filter Element – Fits Yamaha 150-250 HP & Mercury/Suzuki 75-300 HP (Replaces 65L-24563-00-00)

This primary on-engine fuel filter element is designed for a wide range of outboard motors, offering reliable protection against fuel contaminants. It is compatible with select Yamaha 2-Stroke and 4-Stroke models (150-250 HP), Mercury/Mariner 4-Stroke models (75-300 HP), and Suzuki 4-Stroke models (200-300 HP).

This component serves as a direct replacement for multiple OEM part numbers, including Yamaha 65L-24563-00-00, Mercury 35-888289T2, and Suzuki 15412-93J00, ensuring a precise fit with the original filter housing.

• Installation: Mounts directly in-line on the engine.
• Fuel Compatibility: Suitable for gasoline, including ethanol blends up to E10.
• Filtration: Primary on-engine filter with water separator capability.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Yamaha Models

Suzuki Models

Mercury/Mariner Models

Technical Specifications

Package Contents

• 1 x Primary Fuel Filter Element (65L-24563-00-00)
• 2 x O-ring Seals. Note: Please verify contents upon arrival, as seal inclusion can vary.

Installation Guide

Always consult your engine's service manual before performing maintenance. The following are general guidelines:

1. Safety First: Turn off the engine and allow it to cool completely. Disconnect the battery.
2. Locate Filter: Find the on-engine fuel filter housing. It is typically a cup-shaped component connected to the fuel lines.
3. Prepare for Spillage: Place absorbent rags or a container under the filter to catch any spilled fuel.
4. Relieve Pressure: If applicable, relieve the fuel system pressure according to your service manual's instructions.
5. Remove Housing: Carefully unscrew the filter cup or retaining bolt to access the old filter element.
6. Remove Old Filter: Take out the old filter element and any O-rings or seals. Note their orientation.
7. Clean Housing: Wipe the inside of the filter housing clean with a lint-free cloth.
8. Install New Seals: Lightly lubricate the new O-rings with clean engine oil and install them in their correct positions.
9. Install New Filter: Insert the new filter element, ensuring it is seated correctly.
10. Reassemble: Securely tighten the filter cup or retaining bolt to the manufacturer's specified torque. Do not overtighten.
11. Prime System: Reconnect the fuel line and prime the fuel system using the primer bulb until firm.
12. Check for Leaks: Reconnect the battery, start the engine, and carefully check the filter housing for any signs of fuel leaks.

Troubleshooting & FAQ

Q: How do I confirm this filter fits my engine?

A: The best way is to match your existing part number to one of the numbers listed in our Part Number Cross-Reference table. You can also check the Compatible Engine Models tables to find your specific engine model, horsepower, and year range. When in doubt, consulting your engine's service manual is recommended.

Q: How often should I replace my on-engine fuel filter?

A: Most manufacturers recommend replacing the primary on-engine fuel filter annually or every 100 hours of operation, whichever comes first. Refer to your owner's manual for the specific service interval for your engine.

Q: What are the signs of a clogged fuel filter?

A: Common symptoms of a restricted fuel filter include engine hesitation, sputtering, stalling at low speeds, difficulty starting, or a general loss of power, especially under load.

Q: Does this filter include the necessary O-rings for installation?

A: Yes, this kit is intended to include the two required O-ring seals. However, we recommend verifying the package contents upon receipt to ensure all parts are present before beginning installation.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.