06192-ZV4-000 Water Pump Impeller Repair Kit for Honda BF9.9AM BF9.9AW BF9.9AX BF9.9AY BF15AM BF15AW BF15AX BF15AY BF15A1 BF15A2 | JLM Marine

06192-ZV4-000 Water Pump Impeller Repair Kit for Honda BF9.9AM BF9.9AW BF9.9AX BF9.9AY BF15AM BF15AW BF15AX BF15AY BF15A1 BF15A2

This water pump impeller repair kit is engineered for Honda 9.9 HP and 15 HP outboard motors in the BF9.9A and BF15A series. It provides a complete solution to restore proper water circulation and cooling performance in your outboard engine.

This kit directly replaces Honda part numbers 06192-ZV4-000, 04999-ZV6-000AH, and 06192-ZV4-A00, ensuring broad compatibility across multiple model years and configurations.

• Complete impeller service kit with all necessary gaskets and hardware
• Compatible with short shaft (15"), long shaft (20"), and extra long shaft (25") configurations
• Fits 1997-2002 model year Honda outboards

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

This complete impeller service kit contains the following components:

• Water Pump Impeller (Honda part number 19210-ZV4-651)
• Impeller Gasket (Honda part numbers 19232-ZV4-010, 19232-ZV4-610)
• Impeller Keyway (Honda part number 90752-ZV4-650)

Installation Guide

1. Disconnect the fuel line and ensure the engine is completely cool before beginning work.
2. Remove the lower unit from the outboard motor following your engine's service manual.
3. Unbolt and remove the water pump housing, taking note of the orientation of all components.
4. Carefully remove the old impeller, inspecting the housing for scoring or damage.
5. Clean all mating surfaces thoroughly, removing any old gasket material or debris.
6. Lubricate the new impeller with water-resistant grease and orient the blades in the proper rotation direction.
7. Install the new impeller keyway into the drive shaft slot.
8. Install the new gasket onto the pump housing, ensuring proper alignment.
9. Carefully slide the impeller onto the drive shaft, bending the blades in the correct direction of rotation.
10. Reinstall the water pump housing, tightening bolts to the manufacturer's specified torque.
11. Reassemble the lower unit to the outboard motor, checking all seals and connections.
12. Test the water pump operation by starting the engine and confirming strong water flow from the tell-tale indicator.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Honda outboard?
A: Check the compatibility table above for your model and year. For 1997 BF9.9AM and BF15AM models, verify your frame serial number matches or exceeds the numbers listed in the Notes column to ensure proper fitment.

Q: How often should I replace the water pump impeller?
A: Honda recommends inspecting the impeller annually and replacing it every 2-3 years or 200-300 hours of operation, whichever comes first. Replace immediately if you notice reduced water flow, overheating, or visible blade damage.

Q: What are the signs of a failing water pump impeller?
A: Common symptoms include weak or no water discharge from the tell-tale, engine overheating, steam from the engine, reduced performance, or an overheating alarm. Address these signs immediately to prevent engine damage.

Q: Does this kit include everything I need for a complete water pump service?
A: This kit includes the impeller, gaskets, and keyway—the essential wear components. However, a complete rebuild may also require the pump housing, wear plate, or seals depending on your engine's condition and service history.

Q: Is this an OEM or aftermarket part?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.