Red Aries Sticker Set Decal – Fits Mercruiser Alpha One Gen 1 1983–1990 (Replaces 37-13682A90)

Red Aries Sticker Set Decal – Fits Mercruiser Alpha One Gen 1 1983–1990 (Replaces 37-13682A90)

This premium aftermarket decal set is engineered for Mercruiser Alpha One Generation 1 sterndrives (1983–1990), including R, MR, and Alpha One models with serial numbers from 6216687 to 0F386995. It is also compatible with Alpha One SS models from 1986–1989. This comprehensive kit restores the authentic factory appearance of your sterndrive with superior durability.

The set is a direct replacement for Mercury Marine part number 37-13682A90 and Quicksilver 13682A90.

• Complete Restoration Kit: Includes all necessary decals for a full sterndrive exterior restoration, from brand logos to trim graphics.
• Enhanced Durability: Made from UV- and salt-water-resistant marine-grade vinyl for superior longevity compared to original stickers.
• Installation Method: Self-adhesive backing for direct surface application.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Red Aries Sticker Set (Replaces 37-13682A90)

The complete decal set includes multiple individual stickers for a full restoration:

• MerCruiser brand logos
• Alpha One identification decals
• Power Trim XD graphics
• Red Aries ram head emblems
• Various sizing and positioning decals

Installation Guide

1. Surface Preparation: Thoroughly clean all application surfaces using a 50:50 mixture of isopropyl alcohol and distilled water with a lint-free cloth. This removes wax, grease, and other contaminants that can prevent proper adhesion.
2. Dry Completely: Allow the surfaces to air dry completely before proceeding. Wiping the surface dry can leave behind lint fibers that will get trapped under the decal.
3. Wet Application (Recommended): For easier and more precise positioning, lightly mist the surface with a solution of water and a few drops of ammonia-free dish soap. This allows you to slide the decal into the perfect position before it sticks.
4. Apply Decal: Carefully peel the decal from its backing paper and apply it to the prepared surface. Take your time to align it correctly, especially if you are not using the wet application method.
5. Squeegee Firmly: Starting from the center and working your way out, use a plastic squeegee to apply firm, even pressure. This action removes trapped water and air bubbles to ensure a seamless bond.
6. Address Bubbles: If any small air bubbles remain after squeegeeing, you can puncture them with a fine pin and gently press the trapped air out with your finger.
7. Curing Time: Allow the decals to cure for at least 24 hours before exposing the boat to water. A heat gun on a low setting can be used sparingly to help the adhesive set faster, especially on curved surfaces and edges.

Troubleshooting & FAQ

Q: How do I confirm this will fit my Mercruiser drive?
A: This decal set is designed for Mercruiser Alpha One Generation 1 sterndrives made from 1983 to 1990. To ensure a perfect match, please verify your sterndrive's serial number falls within the range of 6216687 through 0F386995.

Q: Are these decals as durable as the original Mercury ones?
A: Yes, and in many cases, they are more durable. This set is made from a premium, multi-layer marine-grade vinyl with advanced UV inhibitors, making it exceptionally resistant to fading, cracking, and peeling caused by prolonged sun and salt water exposure.

Q: What is the best way to remove old decals before applying these?
A: Gently heat the old decals with a hair dryer or heat gun to soften the adhesive, then carefully peel them off using a plastic scraper to avoid damaging the surface. Use an adhesive remover or isopropyl alcohol to eliminate any remaining residue before cleaning the surface for the new application.

Q: What should I do if an edge of a decal starts to lift after application?
A: Edge lifting typically indicates that the surface was not sufficiently cleaned before application. You can attempt to fix it by carefully lifting the edge, cleaning both the surface and the decal's adhesive side with isopropyl alcohol, let it dry, and then reapply with firm pressure.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.