Mercury 225HP Outboard Decal Set – Fits Mercury & Mariner 225HP Engines (Replaces 824105A00, 859276A03, 855408A00)

Mercury 225HP Outboard Decal Set – Fits Mercury & Mariner 225HP Engines (Replaces 824105A00, 859276A03, 855408A00)

This decal set is engineered for Mercury 225HP outboard engines from 1997-2006, including EFI, Optimax, and Digital Saltwater models across 2-stroke and 4-stroke configurations. It is also compatible with select Mariner 200-225HP 2-stroke engines from 1995-2001, restoring the original factory appearance to your marine engine.

This premium aftermarket kit serves as a direct replacement for several OEM part numbers, delivering authentic styling with modern durability. Manufactured from high-performance marine-grade vinyl, these decals feature UV-resistant inks and a protective lamination to guard against saltwater corrosion, fuel, and fading.

• Installation: Pre-cut, peel-and-stick application for an exact fit.
• Material: High-quality, durable marine-grade vinyl resistant to UV, saltwater, and fuel.
• Fitment: Custom-fit for Mercury and Mariner 225HP cowlings as specified in the compatibility list.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 6 x Mercury M Logo Decal - Front Side White (Replaces 824105A00-01)
• 1 x 225 HP Decal - Front Side (Replaces 824105A00-02)
• 1 x 225 HP Decal - Rear Side (Replaces 824105A00-03)
• 1 x Mercury Decal - Rear Side (Replaces 824105A00-04)
• 1 x Mercury Decal - Starboard Side (Replaces 824105A00-05)
• 1 x Mercury Decal - Port Side (Replaces 824105A00-06)

Installation Guide

1. Prepare Workspace: Work in a clean, dust-free area with an ambient temperature between 65°F and 85°F (18°C to 29°C).
2. Clean Surface: Thoroughly clean the engine cowling with a marine-grade degreaser to remove all wax, oil, and salt residue.
3. Scuff Surface: For best adhesion, lightly sand the application area with fine-grit (400-600) sandpaper to create a uniform texture.
4. Final Wipe: Clean the surface with isopropyl alcohol on a lint-free cloth and allow it to dry completely. This step is critical for proper adhesion.
5. Position Decal: Use masking tape to create a "hinge" on one edge of the decal, ensuring it is aligned correctly before application.
6. Apply Decal: Lift the decal on its hinge, peel the backing paper away, and use a plastic squeegee to apply the decal to the surface.
7. Squeegee Firmly: Work from the hinged edge outward, using firm, overlapping strokes to remove all air bubbles.
8. Use Gentle Heat: For complex curves, use a heat gun or hair dryer on a low setting to make the vinyl more pliable and conform to the shape.
9. Remove Transfer Tape: Once the decal is secure, carefully peel back the top transfer tape (if applicable) at a sharp angle.

Troubleshooting & FAQ

How can I be sure this decal set fits my Mercury engine?
Verify your engine's model, year, and serial number against our compatibility table. This set is specifically designed for Mercury 225HP models (1995-2004) and related Mariner engines as listed. For help, use the Mercury Serial Number Guide linked above.

What should I do if the decal edges start to lift after installation?
Edge lifting is typically caused by insufficient surface preparation. Re-clean the lifted area and underlying surface with isopropyl alcohol, gently warm the decal edge with a heat gun, and press down firmly with a squeegee to reactivate the adhesive.

How do I get rid of bubbles that appear under the decal?
Small air bubbles often disappear on their own within a few weeks due to the breathable vinyl. For larger bubbles, you can carefully pierce one side with a fine needle and use a squeegee to press the trapped air out through the hole.

How should I care for these decals to ensure they last?
Wash the decals regularly with fresh water and a mild marine soap. Avoid high-pressure washers, abrasive cleaners, and harsh chemical solvents, as they can damage the vinyl or cause edges to lift. Applying a quality UV-protectant wax can also help prevent fading.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.