396701 Carburetor Repair Kit for Evinrude Johnson BRP Marine | JLM Marine

Carburetor Repair Kit for Evinrude Johnson BRP Marine – OEM 396701

This comprehensive carburetor repair kit is designed to restore carburetor performance on a wide range of Evinrude and Johnson BRP Marine outboard motors from 20 HP to 75 HP, spanning model years 1969 through 1995. Engineered to meet OEM specifications, this kit provides all the essential seals, gaskets, and components needed to rebuild one carburetor to like-new condition.

This aftermarket replacement kit directly replaces Johnson/Evinrude OEM part numbers 392061, 396701, and 398729, as well as Sierra 18-7222. It is compatible with 2-cylinder and 3-cylinder configurations across multiple horsepower ratings, ensuring broad fitment for various Evinrude Johnson BRP Marine models.

• Complete rebuild kit with needle, seat, and premium gaskets for comprehensive carburetor restoration
• Fits both 2-cylinder and 3-cylinder engine configurations across a wide horsepower range
• Direct OEM replacement with quality components for reliable performance

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here's a guide to help you identify your engine's serial/model: Johnson/Evinrude Serial Number Guide.

Technical Specifications

Package Contents

This carburetor repair kit includes all components needed to rebuild one (1) carburetor:

• Needle valve
• Needle seat
• Premium gasket set (all required gaskets and seals)

Note: This kit services ONE carburetor. If your engine has multiple carburetors, order the appropriate quantity.

Installation Guide

1. Disconnect the fuel line and remove the carburetor from the engine following your service manual's instructions.
2. Disassemble the carburetor carefully, noting the position of all components. Take photos if needed for reference during reassembly.
3. Remove all old gaskets and seals from mating surfaces using a gasket scraper. Clean all surfaces thoroughly with carburetor cleaner.
4. Inspect all passages and jets for debris or blockages. Use compressed air to blow out all ports and channels.
5. Install the new needle seat from the kit, ensuring it is properly seated in the carburetor body.
6. Install the new needle valve, checking that it moves freely and seats correctly against the new seat.
7. Replace all gaskets with the new premium gaskets provided in the kit, ensuring proper alignment during assembly.
8. Reassemble the carburetor in reverse order of disassembly, referring to your photos or service manual for correct component placement.
9. Reinstall the carburetor on the engine, ensuring all mounting bolts are tightened to manufacturer specifications.
10. Reconnect the fuel line and check for leaks before starting the engine.
11. Adjust the idle and mixture settings according to your engine's service manual specifications for optimal performance.
12. Test run the engine and verify smooth operation across all throttle ranges. Fine-tune adjustments as needed.

Troubleshooting & FAQ

How do I confirm this kit fits my specific engine?
Verify your engine's horsepower, model year, and cylinder configuration against the compatibility table above. If your exact model and year appear in the table, this kit will fit. You can also cross-reference your current carburetor part number with the OEM numbers listed (392061, 396701, or 398729).

How often should I rebuild my carburetor?
Rebuild intervals depend on usage and fuel quality. Generally, if you experience hard starting, rough idle, poor acceleration, or fuel leaks, it's time for a rebuild. As preventive maintenance, consider rebuilding every 3-5 years or after extended storage periods.

What are the signs that my carburetor needs rebuilding?
Common symptoms include difficulty starting, inconsistent idle, fuel leaking from the carburetor, poor throttle response, or black smoke from the exhaust. Deteriorated gaskets and worn needle/seat assemblies are typical culprits that this kit addresses.

Will this kit work on both 2-cylinder and 3-cylinder engines?
Yes, this kit is compatible with both 2-cylinder and 3-cylinder Evinrude/Johnson outboards within the specified horsepower and year ranges. Each kit rebuilds one carburetor, so order multiple kits if your engine has multiple carburetors.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.