439071 Carburetor Kit & Float for Evinrude Johnson BRP Marine | JLM Marine

439071 Carburetor Kit & Float for Evinrude Johnson BRP Marine

This carburetor repair kit is designed to fit Evinrude Johnson BRP Marine 2-stroke outboard engines ranging from 1.5 HP to 20 HP. Whether you're servicing a classic 1950s model or a more recent engine from the 1990s, this comprehensive rebuild kit provides the gaskets, seals, and float needed to restore proper fuel delivery and performance.

This kit directly replaces OEM part numbers 439071, 382048, 383052, 383067, 398532, and aftermarket equivalent 18-7043, ensuring broad compatibility across multiple carburetor configurations used throughout Evinrude Johnson's production history.

• Complete carburetor rebuild kit with float assembly
• Fits engines from 1.5 HP to 20 HP across multiple decades
• Includes all necessary gaskets and seals for comprehensive carburetor overhaul

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here's a guide to help you identify your engine's serial/model: Johnson/Evinrude Serial Number Guide.

Technical Specifications

Package Contents

This carburetor rebuild kit includes:

• 1 × Carburetor Repair Rebuild Kit (includes all necessary gaskets, seals, and float assembly)
• Compatible with Evinrude Johnson BRP Marine 2, 3, 4, 5, 5.5, 6 HP Outboard Carburetor Repair Seal Kit
• Compatible with Evinrude Johnson BRP Marine 7.5, 10, 15, 18, 20 HP Outboard Carburetor Repair Seal Kit

Installation Guide

1. Disconnect the fuel line and remove the carburetor from the engine. Clean the exterior thoroughly before disassembly.
2. Disassemble the carburetor carefully, noting the position of all components. Take photos if needed for reference during reassembly.
3. Remove old gaskets and seals using a gasket scraper or soft brush. Avoid scratching the mating surfaces.
4. Clean all metal components with carburetor cleaner and compressed air. Inspect jets and passages for blockages or damage.
5. Install new gaskets and seals from the kit in the reverse order of removal. Ensure proper alignment on all mating surfaces.
6. Replace the float assembly if included in your kit. Check that the float moves freely and the needle valve seats properly.
7. Reassemble the carburetor following manufacturer torque specifications. Do not overtighten screws on soft gasket materials.
8. Reinstall the carburetor onto the engine and reconnect the fuel line. Check all connections for proper seating.
9. Prime the fuel system and check for leaks before starting the engine. Adjust idle and mixture screws to factory settings.
10. Start the engine and allow it to warm up. Fine-tune the carburetor adjustments for smooth idle and throttle response.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Johnson or Evinrude engine?
A: Cross-reference your engine's horsepower and year range with the compatibility table above. You can also verify your carburetor's existing part number against the replacement numbers listed (439071, 382048, 383052, 383067, 398532, or 18-7043). If your original carburetor carries any of these numbers, this kit will fit.

Q: What components are included in this carburetor rebuild kit?
A: The kit includes a complete set of gaskets, seals, and a float assembly needed for a full carburetor overhaul. All critical wear items are provided to restore proper fuel metering and prevent leaks.

Q: How often should I rebuild my carburetor?
A: Carburetor rebuilds are typically needed every 3-5 years or when you experience hard starting, rough idle, fuel leaks, or poor throttle response. Engines stored for extended periods or run on ethanol-blend fuels may require more frequent service.

Q: What are the signs that my carburetor needs rebuilding?
A: Common symptoms include difficulty starting, inconsistent idle speed, fuel leaking from the carburetor, black smoke from the exhaust, or poor acceleration. If cleaning the carburetor doesn't resolve these issues, a rebuild is likely needed.

Q: Is this an OEM or aftermarket part?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.