Cooling System Component for Suzuki DF9.9 DF15 (2011-2013) | OEM 17400-94810
This cooling system component is engineered to fit Suzuki DF9.9 and DF15 outboard engines manufactured between 2011 and 2013. Designed as a direct replacement for OEM part number 17400-94810, this component ensures reliable cooling performance for your engine.
This aftermarket replacement meets OEM specifications and provides a cost-effective solution for maintaining your outboard's cooling system integrity. Whether you're performing routine maintenance or addressing a cooling issue, this component delivers dependable performance.
- Direct fit for Suzuki DF9.9 and DF15 models (2011-2013)
- Replaces OEM part number 17400-94810
- Essential cooling system maintenance component
Part Number Cross-Reference
Use this table to confirm equivalent part numbers across OEM and aftermarket brands.
| Brand |
Part Number |
| Suzuki |
17400-94810 |
Compatible Engine Models
Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.
| Brand |
Model |
Years |
OEM Part No. |
| Suzuki |
DF9.9 |
2011-2013 |
17400-94810 |
| Suzuki |
DF15 |
2011-2013 |
17400-94810 |
Technical Specifications
| Specification |
Value |
| OEM Part Number |
17400-94810 |
| Compatibility |
Suzuki DF9.9 / DF15 (2011-2013) |
| Component Type |
Cooling System Component |
Package Contents
Your purchase includes:
-
17471-93902 (Plate) × 1
-
17472-93911 (Gasket) × 1
-
17473-94J00 (Gasket) × 1
-
09420-03005 (Key) × 1
-
17461-93901/03 (Impeller) × 1
-
15410-98500 (Fuel filter) × 1 View Part →
-
16510-45H10 (Fuel filter) × 1 View Part →
-
09280-10013 (O-ring) × 1
-
09168-12017 (Drain Gasket) × 1
-
09168-10022 (Drain Gasket) × 2
-
09204-02004 (Cotter Pin) × 1
-
24OP149 (Gear Oil Pump) × 1
Installation Guide
- Disconnect the battery and allow the engine to cool completely before beginning work.
- Locate the cooling system component on your Suzuki outboard, referring to your service manual or parts diagram for exact positioning.
- Drain the cooling system if necessary to prevent fluid spillage during removal.
- Remove any fasteners, clamps, or hoses securing the old component in place. Note the routing and connections for reinstallation.
- Carefully extract the old cooling component from its mounting position.
- Inspect the mounting area and adjacent components for wear, corrosion, or damage.
- Position the new cooling system component in place, ensuring proper alignment with mounting holes and connection points.
- Secure the component with the original fasteners, tightening to manufacturer specifications.
- Reconnect all hoses and clamps, ensuring secure and leak-free connections.
- Refill the cooling system with the appropriate coolant or ensure water flow passages are clear.
- Reconnect the battery and start the engine, monitoring for leaks and proper cooling function.
- Run the engine at idle and check that the cooling system operates normally with proper water discharge.
Troubleshooting & FAQ
Q: How do I confirm this cooling component fits my Suzuki engine?
A: Verify your engine model is DF9.9 or DF15 manufactured between 2011 and 2013. Cross-check your existing part number against OEM 17400-94810 using the Suzuki parts diagram link provided above.
Q: How often should I inspect or replace cooling system components?
A: Inspect cooling system components annually or every 100 hours of operation. Replace immediately if you notice cracks, leaks, blockages, or overheating symptoms.
Q: What are signs that my cooling system component may be failing?
A: Common symptoms include engine overheating, reduced water discharge from the tell-tale, coolant leaks, or visible damage to the component. Address these issues promptly to prevent engine damage.
Q: Will this component work with earlier or later model years?
A: This component is specifically designed for 2011-2013 DF9.9 and DF15 models. Using it on other years may result in fitment issues or cooling system malfunction.
Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.
Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.
Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.
Important Notes
- Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
- This product is an aftermarket replacement part and is not an OEM component.
- Professional installation is recommended to ensure safety and optimal performance.
Why Choose JLM MARINE?
-
Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
-
Fast Global Shipping: Free delivery worldwide in 5–15 days.
-
Direct from Manufacturer: Competitive pricing without compromising quality.