Water Pump Impeller Service Kit – Fits Suzuki 4-Stroke 150-200 HP (Replaces 17400-96J00, 17400-96J02, 17400-96J04)

Water Pump Impeller Service Kit – Fits Suzuki 4-Stroke 150-200 HP

This water pump impeller service kit is designed for Suzuki 4-Stroke outboard motors, including models DF150, DF150AP, DF175, DF175AP, DF200A, and DF200AP from 2006 to current.

It serves as a direct replacement for Suzuki OEM part numbers 17400-96J00, 17400-96J01, 17400-96J02, 17400-96J03, and 17400-96J04, ensuring a precise fit and reliable performance.

• Engineered for direct OEM replacement installation.
• Components are made from marine-grade materials to resist saltwater corrosion.
• Comprehensive kit includes an impeller, wear plate, housing case, gaskets, and other necessary seals for a full service.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. This kit replaces all previous versions.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Water Pump Impeller (17461-90J01)
• 1 x Impeller Shaft Key (09420-05009)
• 1 x Pump Wear Plate Case (17471-93J02)
• 1 x Housing Gasket (17472-93J00)
• 1 x Water Pump Case Sealing (17416-96J00)
• 1 x Water Pump Housing Case Sleeve Cup (17413-96J01)

Installation Guide

1. Safety First: Disconnect the battery cables and disable the engine ignition system before beginning.
2. Access the Lower Unit: Secure the outboard motor and shift into neutral. Remove the bolts connecting the lower unit (gearcase) to the upper casing and carefully lower it.
3. Disassemble the Water Pump: Locate the water pump housing on top of the gearcase. Remove the bolts securing the housing to expose the impeller.
4. Remove Old Components: Take note of the impeller vane direction. Remove the old impeller, impeller key, wear plate, and gaskets.
5. Clean and Inspect: Thoroughly clean all mating surfaces, removing any old gasket material or corrosion. Inspect the driveshaft for scoring or damage.
6. Install New Components: Place the new gasket and wear plate onto the gearcase. Insert the new impeller key into the driveshaft keyway.
7. Install New Impeller: Lubricate the new impeller with a bit of dish soap or grease. Slide it onto the driveshaft, turning the shaft clockwise to help bend the vanes into the correct position inside the housing.
8. Reassemble Pump Housing: Install the new cup and seals into the housing. Carefully place the water pump housing over the new impeller and tighten the bolts to the manufacturer's recommended torque.
9. Reinstall Lower Unit: Align the driveshaft and water tube, then guide the lower unit back into place. Reinstall and tighten the mounting bolts.
10. Final Checks: Reconnect the battery. Start the engine using a water supply (flushing muffs) and verify a strong, steady stream of water from the "tell-tale" outlet.

Troubleshooting & FAQ

How do I confirm this kit fits my Suzuki engine?
The most reliable method is to check your engine's model and year against the "Compatible Engine Models" table above. This kit is specifically for Suzuki DF150, DF175, and DF200 series outboards from 2006 to present. Verifying the OEM part number stamped on your old parts with our cross-reference table is also a good practice.

What are the signs that a water pump impeller needs replacement?
Common signs include the engine overheating at idle or low speeds, a weak or non-existent water stream from the "tell-tale" outlet, and a dry, cracked, or brittle appearance of the old impeller upon inspection.

How often should I replace the water pump impeller?
For preventative maintenance, it is highly recommended to replace your water pump impeller and service the pump every 100 operating hours or at least once a year, whichever comes first. This is especially important if you operate in saltwater or sandy/silty conditions.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.