Water Pump Impeller Repair Kit – Fits Honda 8–20 HP Outboards (Replaces 06192-ZW9-A30)

Water Pump Impeller Repair Kit – Fits Honda 8–20 HP Outboards (Replaces 06192-ZW9-A30)

This water pump impeller repair kit provides the necessary components to restore the cooling system on specific Honda Marine outboard motors. It is designed to fit a range of 4-stroke engines from 8 HP to 20 HP, including the BF8D, BF9.9D, BF15D, and BF20D series.

This kit serves as a direct replacement for several OEM and aftermarket part numbers, including Honda 06192-ZW9-000, 06192-ZW9-010, 06192-ZW9-A30, 06192-ZW9-A31, Sierra 18-3493, WINGOGO 06192-ZW9-A30, and UANOFCN 06192ZW9000.

• Installation Type: Direct replacement for a straightforward installation.
• Complete Kit: Includes the impeller, gasket, o-ring, and impeller key for a comprehensive service.
• Engine Compatibility: Fits select Honda 4-stroke outboards from 8 HP to 20 HP.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Neoprene Impeller (Replaces 19210-ZW9-A32)
• 1 x Impeller Key (Replaces 90752-ZW9-A30)
• 1 x O-ring (Replaces 91301-ZG3-000)
• 1 x Impeller Gasket (Replaces 19232-ZW9-000)

Installation Guide

1. Disconnect the battery and remove the engine cover. Locate the lower unit and the water pump housing.
2. Remove the bolts securing the lower unit and carefully separate it from the upper casing.
3. Unscrew the bolts on the water pump housing to access the impeller. Note the orientation of the old components.
4. Remove the old impeller, gasket, o-ring, and key. Clean any debris or corrosion from the housing interior.
5. Apply a lubricant such as silicone grease, glycerine, or dish soap to the inside of the housing and to the new impeller.
6. Install the new impeller key into the driveshaft. Slide the new impeller onto the shaft, turning it in the direction of engine rotation to bend the vanes correctly.
7. Place the new o-ring and gasket into position.
8. Securely fasten the water pump housing and reassemble the lower unit to the engine.
9. Once assembled, start the engine in water and verify a steady stream of water from the engine's tell-tale outlet.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my Honda outboard?

A: Please check the "Compatible Engine Models" table on this page. Verify that your specific model, horsepower, and series (e.g., BF8D, BF15D) are listed. Cross-referencing your existing part number with our list also helps ensure a correct match.

Q: What are the signs my impeller is failing and needs replacement?

A: Common signs include the engine overheating, an engine alarm sounding, or a weak or non-existent water stream from the "tell-tale" outlet port. Regular inspection is recommended, typically annually or every 100 hours of use.

Q: What lubricant should I use during installation?

A: For best results and to prevent damage during first startup, lubricate the impeller and housing with silicone grease, glycerine, or dish soap. Important: Never run the pump dry, as it will damage the new impeller instantly.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.