Skeg Guard for MerCruiser Bravo I & III 1990+ (Replaces 27051)

Skeg Guard for MerCruiser Bravo I & III 1990+ (Replaces 27051)

This Safe-Skeg is designed to provide a durable solution for protecting a new skeg or repairing a damaged one. It is constructed from mirror-polished 316 marine-grade stainless steel to add shine and improve steering performance while preventing wear and minor impacts.

This part is a direct replacement for OEM/Aftermarket numbers: 27051, 35-SS615.

Compatible Engine Models

Confirm your engine model/year in the table below.

⚠ Not Compatible With: XR, Sport Master, or Bravo 2 models. Please verify your drive model before purchasing.

Technical Specifications

Package Contents

• 1 x Stainless Steel Skeg Guard
• Self-locking stainless steel mounting bolts (pre-coated with thread locker)
• 2 x Allen wrenches
• 1 x Installation Instructions

Installation Guide

Installation is straightforward, requires no marine technician, and can be completed in minutes. Follow these general steps:

1. Ensure there is at least 2 to 3 inches of the upper skeg remaining to securely hold the guard.
2. Clean the surface of your existing skeg to ensure it is free of debris.
3. Using a mallet, gently tap the guard over your current skeg until fully seated.
4. Using the two pre-drilled mounting holes in the guard as pilot holes, drill through the skeg using a 1/4" drill bit.
5. Insert the provided self-locking bolts (which are pre-coated with thread locker).
6. Tighten the bolts securely with the provided Allen wrenches until the guard is firmly in place.

Troubleshooting & FAQ

How do I know if this will fit my engine?
Please carefully review the "Compatible Engine Models" table above. If you are unsure, compare the dimensions and visual shape of your lower unit with our product images.

Can I install it on an already broken skeg?
Yes, the guard can be installed over a broken skeg as long as there is at least 2 to 3 inches of the original skeg remaining to secure the mounting hardware.

What is the benefit of the drain hole in the design?
The drain hole is a critical feature that allows water to escape from inside the guard. This prevents water from becoming trapped, which stops corrosion and protects the skeg from damage caused by freezing in cold climates.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.

Why Choose JLM MARINE?

• Direct from Manufacturer: Competitive pricing directly from the source without compromising on material quality.
• Premium Materials: Constructed strictly from marine-grade 316 stainless steel for maximum saltwater durability.
• Precision Fitment: Each model's contour is carefully designed to match specific lower units to maintain optimal steering performance.