22283751 V-Belt for Volvo Penta D3 | JLM Marine

V-Belt for Volvo Penta D3 Engines – Replaces OEM 22283751 & 21141198

This serpentine drive belt is engineered to fit Volvo Penta D3 series marine diesel engines, delivering reliable power transmission from the crankshaft to the alternator pulley. Designed as a direct replacement for OEM part numbers 22283751 and 21141198, it ensures proper belt tension and longevity across a wide range of D3 engine variants, including D3-110I, D3-140A/I, D3-150I, D3-170A/I, D3-200A/I, and D3-220A/I models spanning G and H series iterations.

Built to OEM specifications with durable materials, this v-belt maintains consistent performance under the demanding conditions of marine propulsion systems. It provides an exact-fit solution for engine builders, technicians, and vessel operators seeking quality aftermarket replacement components for their Volvo Penta installations.

• Includes one complete serpentine drive belt ready for installation
• Direct drop-in replacement for Volvo Penta part numbers 22283751 and 21141198
• Compatible with D3 series diesel engines across multiple horsepower ratings

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

Your package includes the following component:

• 1 × Serpentine Drive Belt

Installation Guide

1. Ensure the engine is completely off and cool before starting work. Disconnect the negative battery terminal to prevent accidental starting.
2. Locate the alternator and serpentine belt routing on your Volvo Penta D3 engine. Take a photo or diagram of the belt path for reference during reinstallation.
3. Identify the belt tensioner mechanism (spring-loaded or adjustable). Use the appropriate tool to release tension on the existing belt.
4. While holding tension release, carefully slide the old serpentine belt off the alternator pulley and other driven components. Inspect pulleys for wear, cracks, or debris.
5. Route the new serpentine belt around the crankshaft pulley, alternator pulley, and any idler or tensioner pulleys following the original path. Ensure the ribbed side contacts each pulley correctly.
6. Apply tension using the tensioner mechanism to seat the belt fully on all pulleys. Verify correct alignment across all grooves.
7. Rotate the crankshaft manually by hand two full revolutions to confirm proper belt tracking and seating. Check that the belt does not slip or misalign.
8. Reconnect the negative battery terminal. Start the engine and observe belt operation at idle for any unusual noise, vibration, or slippage.
9. If abnormal sounds or movement occur, shut down immediately and recheck belt routing and tension. Adjust as necessary.

Troubleshooting & FAQ

Q: How do I confirm this belt fits my specific Volvo Penta D3 engine?
A: Cross-reference your engine model designation (e.g., D3-140I-G) with the compatibility table above. You can also verify by matching the OEM part number (22283751 or 21141198) found on your existing belt or in your engine's parts manual.

Q: What are the signs that my serpentine belt needs replacement?
A: Common indicators include visible cracks, fraying, glazing on the ribbed surface, squealing noises during startup or under load, alternator charging issues, or belt slippage. Inspect the belt regularly and replace if any of these symptoms appear.

Q: How often should I replace the serpentine belt on my D3 engine?
A: Volvo Penta typically recommends inspection every 200–400 operating hours and replacement every 800–1,000 hours or per your engine's service schedule. Harsh operating conditions (saltwater, high temperatures, heavy loads) may require more frequent replacement.

Q: Can I use this belt if my engine uses a different OEM part number?
A: Only if your part number supersedes or cross-references to 22283751 or 21141198. Do not install if your OEM number is not listed—belt length and profile must match exactly to avoid damage.

Q: What is the difference between this aftermarket belt and the OEM Volvo Penta belt?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.