126650-35350 Oil Filter Element Kit for Yanmar 4HD30A 4HD35 4HD35A 6HA2M-THE 6HA2M-WDT 6HA2M-WHT 6HA-DT 6HA-DTE 6HAE 6HA-HT 6HAK 6HAK-DT 6HAK-T 6HAL-DTN 6HAL-HTN 6HAL-N 6HAL-TN 6HAM-DTE 6HAME | JLM Marine

Oil Filter Element Kit – Fits Yanmar 4HD & 6HA Series Diesel Engines

This high-quality oil filter element kit is engineered for Yanmar diesel engines in the 4HD and 6HA series. Designed to meet OEM specifications, it ensures reliable filtration and engine protection across a wide range of Yanmar marine and industrial applications.

This kit directly replaces Yanmar OEM part number 126650-35350, providing an exact-fit aftermarket solution for routine maintenance and service intervals on compatible 4HD and 6HA engine models.

• Complete oil filter element kit for comprehensive engine protection
• Compatible with both 4HD and 6HA Yanmar diesel engine families
• Direct OEM replacement for streamlined installation

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

This kit includes the following components:

• 1 × Oil Filter Element Kit

Installation Guide

1. Ensure the engine is off and cool before beginning maintenance. Gather necessary tools including a filter wrench and drain pan.
2. Locate the oil filter housing on your Yanmar engine. Consult your engine manual if needed.
3. Place a drain pan beneath the filter housing to catch residual oil.
4. Carefully remove the old oil filter element from the housing using a filter wrench if necessary.
5. Clean the filter housing sealing surface thoroughly, removing any old gasket material or debris.
6. Inspect the new filter element and ensure all O-rings and gaskets are properly seated.
7. Lightly lubricate the new O-ring or gasket with clean engine oil.
8. Install the new oil filter element into the housing, ensuring proper alignment and fit.
9. Tighten the filter housing cover to the manufacturer's specified torque. Do not over-tighten.
10. Refill the engine with the recommended grade and quantity of oil per your service manual.
11. Start the engine and allow it to run for a few minutes, checking for leaks around the filter housing.
12. Shut off the engine, check the oil level, and top off if necessary. Dispose of old oil and filter properly.

Troubleshooting & FAQ

Q: How do I confirm this oil filter kit fits my Yanmar engine?
A: Check the compatible engine models table above to verify your exact engine model is listed. Additionally, confirm that your current filter matches OEM part number 126650-35350. If your model appears but specifications differ, contact us before purchasing.

Q: How often should I replace the oil filter on my Yanmar diesel engine?
A: Yanmar typically recommends replacing the oil filter every 100–200 operating hours or annually, whichever comes first. Always consult your engine's service manual for the manufacturer's specific maintenance schedule, as intervals may vary based on operating conditions.

Q: What are signs that my oil filter needs replacement?
A: Common indicators include decreased oil pressure, dark or contaminated oil, unusual engine noise, or the oil filter service light (if equipped). If you notice any of these symptoms or if you're at your scheduled maintenance interval, replace the filter immediately.

Q: Can I use this filter kit if I operate my engine in harsh or heavy-duty conditions?
A: Yes, this filter is designed to meet OEM specifications and is suitable for standard and heavy-duty marine or industrial use. However, engines operating in extreme conditions (high dust, continuous high load) may require more frequent filter changes. Monitor oil condition closely and adjust intervals as needed.

Q: What's the difference between this aftermarket filter kit and the OEM version?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.