Mercury 9.9HP Outboard Decal Set – Fits Mercury 9.9HP 2-Stroke & 4-Stroke (Replaces 37-12836A00, 37-12836A96, 37-12836A94)

Mercury 9.9HP Outboard Decal Set – Fits Mercury 9.9HP 2-Stroke & 4-Stroke (Replaces 37-12836A00, 37-12836A96, 37-12836A94)

This decal set is designed for Mercury 9.9 HP outboard motors, providing a direct replacement for original graphics. It is compatible with 2-Stroke models manufactured from 1999–2006 and 4-Stroke models from 2005–2006, ensuring a precise fit for the original engine cowl.

Engineered to restore your outboard's factory appearance, this kit replaces OEM part numbers 37-12836A00, 37-12836A96, and 37-12836A94. The decals are made from marine-grade materials to withstand UV exposure, saltwater, and temperature fluctuations, ensuring long-lasting durability and color fidelity.

• Complete Kit: Includes pre-cut decals for the front and sides of the engine cowl, plus HP and logo graphics.
• Peel-and-Stick Installation: Features a marine-grade permanent adhesive for a secure, lasting bond.
• High-Durability Materials: Made with UV-resistant inks and a protective laminate coating to prevent fading and abrasion.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Front Cowl Decal (Mercury Logo with HP designation)
• 1 x Side Cowl Decal Set - Left (Mercury branding)
• 1 x Side Cowl Decal Set - Right (Mercury branding)
• 1 x HP Rating Decal (9.9 designation)
• 1 x Mercury "M" Logo Decal
• 1 x Installation Instructions Sheet

Installation Guide

1. Prepare the Surface: Ensure the engine is cool and dry. Remove old decals using a heat gun to soften the adhesive, then clean the cowl surface thoroughly with a marine-grade degreaser and isopropyl alcohol.
2. Test Position: Lay out the new decals and use masking tape to temporarily position them on the cowl. Check alignment against original placement or reference photos.
3. Wet Application: Mix a mild soap-and-water solution in a spray bottle. Lightly spray the cowl surface to allow for repositioning during application.
4. Apply Decal: Peel back a small portion of the decal's backing paper and apply the exposed adhesive to the cowl. Slowly remove the rest of the backing while using a squeegee to smooth the decal from the center outwards.
5. Squeegee Firmly: Apply firm, overlapping strokes with the squeegee to remove all air bubbles and water from underneath the decal.
6. Finalize Edges: Pay special attention to the edges and corners, ensuring they are fully adhered to prevent peeling.
7. Cure Time: Allow the decals to cure for at least 24 hours before exposing the engine to water or extreme temperatures.

Troubleshooting & FAQ

Q: How do I confirm this decal set fits my Mercury engine?
A: This set is for Mercury 9.9HP 2-Stroke (1999-2006) and 4-Stroke (2005-2006) models. Check the Compatible Engine Models table and use our Mercury Serial Number Guide to verify your specific model and year. Ensure the OEM part number (37-12836A00) matches your requirements.

Q: How are these decals different from the original Mercury ones?
A: Our decals are aftermarket replacements designed to meet or exceed OEM specifications. We use high-quality PVC foil, UV-resistant inks, and a protective laminate that often provides enhanced durability and fade resistance compared to original factory decals from that era.

Q: How long will these decals last and how should I care for them?
A: With proper care, the decals should last 5-7 years. To maintain them, always rinse the engine with fresh water after saltwater use. Clean gently with mild soap and water, and consider applying a marine-grade UV protectant annually to maximize service life.

Q: What causes the decals to lift or bubble?
A: Bubbling is usually caused by trapped air during installation, while edge lifting often results from improper surface preparation. Follow the wet application method carefully to minimize bubbles, and ensure the cowl is perfectly clean and free of residue before application.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.