Hull Seal Mounting Rubber – Fits Volvo Penta 110S-150S Series (Replaces 854932, 22303438)

Aftermarket Hull Seal Mounting Rubber – Fits Volvo Penta 110S-150S Series (Replaces 854932, 22303438)

Thishull seal mounting rubber provides essential sealing protection for specific Volvo Penta saildrive systems. Engineered from a high-grade, UV-resistant marine rubber compound, this component ensures watertight integrity between the vessel's hull and the saildrive unit to prevent water intrusion.

Designed for Volvo Penta 110S, 120S, 130S, 150S, and MS25S series saildrives manufactured from 1990–2020. It serves as a direct replacement for Volvo Penta part numbers 854932, 22303438, 3583365, 852699, and 853479.

• Installation Method: Mounts externally on the hull as a direct bolt-on replacement.
• Material: Saltwater-compatible, high-grade marine rubber compound.
• Compatibility: Designed for use with diesel marine engines.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers for thiscomponent.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Hull Seal Mounting Rubber (Replaces 854932, 22303438)

Installation Guide

1. Ensure the vessel is safely out of the water and properly supported before beginning work.
2. Disconnect the saildrive from the engine and carefully remove the saildrive unit from the hull.
3. Remove the old hull seal and thoroughly clean the mounting surfaces on both the hull and the saildrive.
4. Inspect the hull and saildrive for any damage, corrosion, or irregularities.
5. Position the new rubber seal onto the hull, ensuring it is correctly oriented and seated.
6. Reinstall the saildrive unit, following the manufacturer's torque specifications for the mounting bolts.
7. Reconnect all systems (propeller shaft, exhaust, etc.) and check for proper alignment.
8. After launching the vessel, immediately inspect the area for any signs of water leaks.

Troubleshooting & FAQ

Q: How do I know if this hull seal fits my saildrive?

A: This seal fits Volvo Penta 110S, 120S, 130S, 150S, and MS25S series saildrives (1990–2020). To confirm fitment, check that your model is listed in our compatibility table and that your existing part number matches one of the direct replacements: 854932, 22303438, 3583365, 852699, or 853479.

Q: What are the signs that my saildrive seal needs replacement?

A: The most common signs are water found in the bilge around the saildrive, or visible signs of cracking, perishing, or deformation on the rubber seal itself. Volvo Penta typically recommends replacement every seven years, but you should always follow the service schedule in your owner's manual.

Q: Is this an OEM part?

A: This is anreplacement part, not an OEM component. It is engineered to meet or exceed original equipment specifications using comparable high-grade materials.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is anreplacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.