Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B

Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B

Vendor: JLM Marine
Availability: In Stock
Product Type: Flexible Rubber Impeller
$39.60
$39.60
Subtotal: $39.60

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B

Flexible Rubber Water Pump Impeller 1210-0001 – 12 Blade Neoprene 57 mm 12-Spline – Fits Johnson 09-1027B

$39.60
Описание

How to Match This Part

This is a flexible rubber raw water pump impeller. It sits inside the pump housing behind the cover plate and is driven by a 12-tooth splined shaft. It replaces the primary original part number Jabsco 1210-0001, and is also supplied against Johnson 08-1027B / 09-1027B, JMP 7100-01, DJ 08-21-1201 and Yanmar 129470-42530.

Match this part by checking your engine in this order:
1. Original impeller part number (stamped on the old impeller or listed in the pump section of your parts catalog)
2. Drive type (this listing is a 12-spline hub, not a key drive and not a pin drive)
3. Pump model (cast or labelled on the pump body)
4. Engine or generator model code (on the identification plate)

Identify it physically before ordering. This impeller has twelve vanes moulded in black neoprene around a machined brass 12-spline insert. JMP 7100-01 is 57 mm diameter, 31.5 mm width and 16 mm (5/8 in.) bore. It is not interchangeable with the 12-blade key-drive JMP 7110-01 (57 × 20 × 12.7 mm) or with nitrile Jabsco 1210-0003.

  • ✓ Primary OEM: Jabsco 1210-0001
  • ✓ Product form: 12-blade neoprene impeller, brass 12-spline insert, 16 mm bore
  • ✓ Fitment: part number, then drive type, then pump model

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. Jabsco 1210-0001-P and JMP 7100-01K are kit numbers. This listing is the impeller only.

Type Brand Part Number Notes
OEM Jabsco Pump 1210-0001 Primary reference. Profile K. 1210-0001-P is the kit number. 1210-0003 is nitrile, not this listing
OEM Jabsco Pump 1210-0001-P Source-sheet kit number. This listing does not include gasket or O-ring
OEM Johnson Pump (SPX Flow) 08-1027B / 09-1027B 12-spline impeller
OEM JMP Pump 7100-01 Bare impeller. JMP 7100-01K is a kit
OEM DJ Pump 08-21-1201 12-blade spline equivalent
OEM Kashiyama SP-30 Source-sheet number. JMP also lists KP-30 for the same impeller
OEM Yanmar 129470-42530 JMP 7100-01 equivalent. Match this number on the old impeller
OEM Yanmar 129470-42531 / 129470-42532 JMP 7100-01 equivalent
OEM Yanmar 129670-42530 JMP 7100-01 equivalent
OEM Yanmar 127610-42270 Source-sheet number. Confirm on the old impeller
OEM Yanmar 129670-42610 Source-sheet number. JMP lists 129670-42531 for this size, not 42610. Confirm on the old part
OEM Caterpillar 232-3198 Also written 2323198. JMP JPR-CT0150 pump family
OEM Northern Lights 12-12060 / 25-12060 JMP 7100-01 equivalent. JMP JPR-NL10IP / JPR-NL10IP2
OEM Nikkiso F15CBC JMP 7100-01 equivalent
OEM Cummins Onan 131-0050 / 132-0162 JMP 7100-01 equivalent
OEM Perkins 0460038 / 24880190 JMP 7100-01 equivalent
Other brand Industry interchange 888-134 Source-sheet other-brand number for this SKU

Compatible Engine Models

Confirm the original impeller number and the 12-spline hub. Do not assume every Yanmar 3JH / 4JH or Volvo Penta D2 uses this part. Match the original number first.

Brand Engine / Pump Model Original Part No. Notes
Yanmar Engines whose parts list calls for 129470-42530 / 42531 / 42532 or 129670-42530 (JMP JPR-YM04JHA / JPR-YM04JHB) 129470-42530, 129470-42531, 129470-42532, 129670-42530 Match the original number. Do not dump every 3JH / 4JH
Volvo Penta Pumps specified for 825940 / 860203 / 875811 (JMP JPR-VP0020D) 825940, 860203, 875811 JMP equivalent list. Confirm the original impeller number
Northern Lights Generators whose parts list calls for 12-12060 or 25-12060 (JMP JPR-NL10IP) 12-12060, 25-12060 Match the original number
Caterpillar Pumps specified for 232-3198 (JMP JPR-CT0150) 232-3198 Match the original number
Cummins Onan / Perkins Engines and generators specified for 131-0050, 132-0162, 0460038 or 24880190 131-0050, 132-0162, 0460038, 24880190 JMP 7100-01 equivalent list

Technical Specifications

Specification Value
Part type Flexible rubber impeller, raw water pump
Number of blades 12
Impeller diameter (A) 57 mm (2-1/4 in.)
Impeller width / depth (B) 31.5 mm (1-1/4 in.)
Shaft bore diameter (C) 16 mm (5/8 in.)
Insert / drive type 12-tooth spline drive
Insert material Machined brass
Vane material Neoprene rubber

Package Contents

This listing is for the impeller only, as shown in the product images. Please refer to the part number cross-reference table to confirm component details.

Cover plate gaskets, O-rings and lubricant are not included. Jabsco 1210-0001-P and JMP 7100-01K add those service parts. If your service procedure calls for a new cover seal, order it separately against your pump model.

Installation Guide

  1. 1 Stop the engine, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.
  2. 2 Remove the cover plate screws and lift off the cover. Keep the screws and the old gasket or O-ring together so you can compare the seal size when reassembling.
  3. 3 Note the spline orientation, then grip the brass insert and pull the old impeller straight off. Recover any broken vane pieces from the downstream cooling circuit before continuing.
  4. 4 Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.
  5. 5 Align the 12-tooth spline in the brass insert with the pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all twelve vanes lay over the same way.
  6. 6 Refit the cover plate with a serviceable gasket or O-ring, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm a solid stream of cooling water and no leaks at the cover.

Note: Professional installation is recommended to ensure safety and optimal performance.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Start from the original impeller number. If the old part is Jabsco 1210-0001, Johnson 08-1027B / 09-1027B, JMP 7100-01, DJ 08-21-1201, Yanmar 129470-42530, CAT 232-3198, Onan 132-0162 or Perkins 0460038, and the brass hub is a 12-tooth spline on a 16 mm bore, this impeller is the correct size.

Will this fit every Yanmar 3JH / 4JH or Volvo Penta D2? +

No. Only engines whose parts list calls for 129470-42530 (or the other verified numbers in the table). Some D2 and JH pumps use a different impeller. Match the original number and the 12-spline hub.

Is this the same as JMP 7110-01 / Sherwood 10077? +

No. 7110-01 is a 12-blade key-drive impeller, 57 × 20 × 12.7 mm. This listing is a 12-spline impeller, 57 × 31.5 × 16 mm.

What are the signs that my impeller needs replacing? +

The usual symptoms are a weak or intermittent stream of cooling water, rising engine temperature, and vanes that are cracked, flattened, hardened or missing on inspection. Flexible impellers are a wear item; inspect on a fixed service interval rather than waiting for failure.

Is this a kit or just the impeller? +

This listing is the impeller only. Jabsco 1210-0001-P and JMP 7100-01K are kit numbers that add gaskets, O-rings and lubricant.

Is this an OEM or aftermarket part? +

This listing is an aftermarket replacement part and is not an OEM component. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost? +

We offer fast global shipping, typically 5–15 days worldwide, and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy? +

This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window for unused items in original condition; please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • The impeller is supplied on its own. Cover seals and lubricant must be ordered separately if your service procedure requires them.
  • This is a 12-spline, 16 mm bore impeller. It will not fit the 12-blade key-drive JMP 7110-01 (12.7 mm) or nitrile 1210-0003.
  • Never run the pump dry. Even a few seconds without water will damage the neoprene vanes.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Перевозки

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

О компании JLM Marine

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Search
Add to garage

Сопутствующие товары

 
 
 
 
 
 

Недавно просмотренные продукты