> > > >

Exhaust Mixing Elbow 119171-13490 – Fits Yanmar 4LH Series

Vendor: JLM Marine
Availability: In Stock
Product Type: Exhaust Elbow
$209.00
$209.00
Subtotal: $209.00

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Exhaust Mixing Elbow 119171-13490 – Fits Yanmar 4LH Series

Exhaust Mixing Elbow 119171-13490 – Fits Yanmar 4LH Series

$209.00

How to Match This Part

This aftermarket exhaust mixing elbow replaces Yanmar Marine reference 119171-13490. It mixes raw cooling water with exhaust gas and routes the mixture away from the engine on compatible Yanmar 4LH-series marine diesels.

Match this part in this order:
1. Original part number on the elbow or parts list
2. Engine model on the engine identification plate
3. Physical form against the product images

Confirm a triangular 3-bolt mounting flange (one hole may be an elongated slot), a side water-injection nipple with a beaded hose end, and a large beaded discharge outlet before ordering. See the product images for flange orientation and outlet curve.

Compatible Engine Models

Confirm your engine model and year in the table below. Match the original part number and the physical shape to the product images. Find the model code on the engine identification plate.

Brand Engine Model
Yanmar Marine 4LH-TE
Yanmar Marine 4LH-HTE
Yanmar Marine 4LH-HTZ
Yanmar Marine 4LH-HTZAY

Technical Specifications

Specification Value
Product type Exhaust mixing elbow
Material Stainless steel
Mounting flange Triangular 3-bolt (one hole elongated slot)
Water inlet 1-1/4" (32 mm) side injection nipple
Discharge diameter 3-1/2" (89 mm)
Application Yanmar 4LH-series marine diesel exhaust mixing

Installation Guide

1

Allow the engine to cool completely and disconnect the battery before starting work.

2

Compare the new elbow to the original for flange bolt pattern, water-nipple location, and outlet angle before removing the old part.

3

Remove the old elbow, clean the manifold mating face, and install a suitable exhaust gasket and fasteners as specified in the engine service manual.

4

Seat the new elbow on the flange, tighten fasteners evenly to the manufacturer’s torque values, then reconnect the water inlet hose and exhaust hose with secure clamps.

5

Reconnect the battery, start the engine, and check for water or exhaust leaks at the flange and hose joints before returning the vessel to service.

Note: Follow the Yanmar service manual for torque and gasket requirements. Professional installation is recommended.

Troubleshooting & FAQ

Is this an OEM or aftermarket part? +

This is an aftermarket replacement manufactured to match the Yanmar 119171-13490 application. It is not a genuine Yanmar OEM part.

Does a gasket come with this elbow? +

Do not assume a mounting gasket is included. Plan to use the gasket called out in your engine parts list (commonly Yanmar 119171-13510 or equivalent) unless your order confirmation states otherwise.

My 4LH model is close but not listed—will it fit? +

Only the engine models in the compatibility table above are confirmed for this listing. Other 4LH variants may use a different mixing elbow. Match the original OEM number and flange layout before purchasing.

Why Choose JLM MARINE?

  • Quality Control: Each batch is inspected for dimensional consistency and workmanship.
  • Direct from Manufacturer: Aftermarket marine parts built for the applications listed on this page.

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.

Сопутствующие товары

Недавно просмотренные продукты