3581460 Drive Belt for Volvo Penta KAD32 KAD43 KAMD43 KAD44 KAMD44 KAD300 TAMD42WJ-A HS1A HS1E TD610V TWD610V TD630VE TWD630VE TD640VE TWD610PB TD71A TID71A TWD710V TD730VE TWD731VE TAD730V TWD740VE | JLM Marine

Drive Belt for Volvo Penta KAD32 KAD43 KAMD43 KAD44 KAMD44 KAD300 TAMD42WJ-A HS1A HS1E TD610V TWD610V TD630VE TWD630VE TD640VE TWD610PB TD71A TID71A TWD710V TD730VE TWD731VE TAD730V TWD740VE

This marine compressor and alternator drive belt is designed to fit a wide range of Volvo Penta diesel and gasoline marine engines, including KAD32, KAD43, KAMD43, KAD44, KAMD44, KAD300, TAMD42WJ-A, HS1A, HS1E, TD610V, TWD610V, TD630VE, TWD630VE, TD640VE, TWD610PB, TD71A, TID71A, TWD710V, TD730VE, TWD731VE, TAD730V, and TWD740VE models. Engineered to OEM specifications, this belt ensures reliable power transmission for critical engine accessories.

This belt is a direct replacement for OEM part number 3581460, providing dependable performance for your Volvo Penta marine engine. Manufactured to meet or exceed original equipment standards, it delivers consistent operation in demanding marine environments.

• Direct OEM replacement for Volvo Penta part number 3581460
• Drives compressor and alternator systems on Volvo Penta marine engines
• Precision-engineered for reliable power transmission

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

Your package includes the following components:

• 1 X Drive Belt

Installation Guide

1. Preparation: Disconnect the battery and allow the engine to cool completely. Gather necessary tools including belt tension gauge and appropriate wrenches.
2. Access: Remove engine covers or guards to access the drive belt routing on the compressor and alternator pulleys.
3. Belt Removal: Release tension on the old belt by loosening the tensioner or adjusting bolt. Carefully remove the old belt from all pulleys, noting the routing path.
4. Inspection: Inspect all pulleys for wear, damage, or debris. Clean pulley surfaces if necessary to ensure proper belt contact.
5. Belt Installation: Route the new belt following the original path around all pulleys (compressor, alternator, crankshaft). Ensure the belt is properly seated in all pulley grooves.
6. Tensioning: Apply proper tension according to Volvo Penta specifications using the tensioner or adjustment mechanism. Use a tension gauge to verify correct belt tension.
7. Final Check: Rotate the engine manually to confirm smooth belt operation and proper tracking on all pulleys.
8. Reassembly: Reinstall all covers and guards. Reconnect the battery.
9. Test Run: Start the engine and observe belt operation at idle and various RPMs. Listen for unusual noises or vibrations indicating misalignment.
10. Re-check Tension: After initial run-in (approximately 30 minutes of operation), re-check and adjust belt tension if needed.

Troubleshooting & FAQ

Q: How do I confirm this belt fits my specific Volvo Penta engine?
A: Cross-reference your engine model against the compatibility table above and verify your current belt matches OEM part number 3581460. If your model is listed and the part number matches, this belt will fit your engine.

Q: How often should I replace my drive belt?
A: Inspect your drive belt every 100 hours of operation or annually, whichever comes first. Replace immediately if you notice cracking, fraying, glazing, or excessive wear. Typical replacement interval is 500-1000 hours depending on operating conditions.

Q: What are the signs that my drive belt is failing?
A: Common symptoms include squealing noises (especially when accelerating), battery charging issues, visible cracks or fraying on the belt surface, belt slippage, or accessory system malfunction. Replace the belt immediately if any of these signs appear.

Q: Can I install this belt myself or do I need a mechanic?
A: While experienced DIY mechanics can install this belt, proper tensioning is critical for optimal performance and longevity. If you're unfamiliar with belt replacement or lack proper tension measuring tools, professional installation is recommended.

Q: What's the difference between this aftermarket belt and the OEM version?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.