6AH-W0093-00 Carburetor Repair Kit for Yamaha F15C F20B | JLM Marine

Carburetor Repair Kit – Fits Yamaha 2-Stroke 15-20 HP F15C & F20B (2006-2009)

This comprehensive carburetor repair kit is engineered for Yamaha 2-cylinder 4-stroke outboard engines, specifically the 15 HP F15C and 20 HP F20B models manufactured between 2006 and 2009. It provides all essential components needed to restore proper carburetor function and fuel delivery.

Designed as a direct replacement for OEM part number 6AH-W0093-00, this kit ensures reliable performance and compatibility with your Yamaha outboard carburetor assembly.

• Includes 12 critical components: gaskets, needle valve, float assembly, O-ring, screws, and more
• Restores fuel metering accuracy and prevents leaks in 4-stroke carburetors
• Complete rebuild solution for carburetor overhaul or maintenance

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This carburetor repair kit includes the following components:

• 1 × Gasket (65W-14126-10-00)
• 1 × Valve, Needle (6G1-14546-01-00)
• 2 × Pin, Float (6BX-14592-00-00)
• 2 × Pin, Float Arm (6H4-14548-00-00)
• 1 × Cover, Plunger Cap (65W-14373-01-00)
• 1 × O-Ring (67F-14398-10-00)
• 1 × Gasket, Float Chamber (6AH-14384-00-00)
• 1 × Gasket (6G1-14398-00-00)
• 4 × Screw, With Washer (97980-04114-00)
• 1 × Float (6AH-14985-00-00)
• 1 × Clip (633-14159-00-00)

Installation Guide

1. Disconnect the fuel line and remove the carburetor from the engine following your service manual instructions. Allow any residual fuel to drain into an approved container.
2. Disassemble the carburetor carefully, noting the position of each component. Remove the float chamber using the provided screws.
3. Remove the old gaskets and seals from all mating surfaces. Clean all carburetor components thoroughly with carburetor cleaner and compressed air.
4. Install the new float chamber gasket (6AH-14384-00-00) onto the carburetor body, ensuring proper alignment with all mounting holes.
5. Remove the old needle valve and replace it with the new valve (6G1-14546-01-00). Ensure the valve seats properly in its housing.
6. Install the new float (6AH-14985-00-00) using the new float pins (6BX-14592-00-00) and float arm pins (6H4-14548-00-00). Verify smooth movement without binding.
7. Replace the plunger cap cover (65W-14373-01-00) and install the new O-ring (67F-14398-10-00) in its designated groove.
8. Install the new top gasket (65W-14126-10-00) and additional gasket (6G1-14398-00-00) in their respective positions.
9. Reassemble the float chamber to the carburetor body using the four new screws with washers (97980-04114-00). Tighten in a cross pattern to specified torque.
10. Install the clip (633-14159-00-00) in its proper location as indicated in your service manual.
11. Reinstall the carburetor onto the engine, reconnect the fuel line, and check all connections for proper seating.
12. Start the engine and inspect for fuel leaks around all gasket surfaces. Adjust idle mixture and speed as needed per manufacturer specifications.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my Yamaha outboard?
A: Verify your engine model is F15C or F20B (2006-2009) by checking the model plate on the engine bracket. Cross-reference the OEM part number 6AH-W0093-00 in your service manual or parts diagram to ensure compatibility.

Q: How often should I rebuild my carburetor with this kit?
A: Carburetor rebuild intervals depend on usage and fuel quality, but typically every 2-3 years or when you experience hard starting, rough idle, or fuel leaks. Ethanol-blended fuels may require more frequent service.

Q: What are the signs that I need to replace my carburetor gaskets and seals?
A: Common symptoms include fuel leaking from the carburetor body, difficulty starting, erratic idle, poor acceleration, or visible deterioration of gaskets. If your engine has been sitting for extended periods, gaskets often dry out and crack.

Q: Can I reuse any of the old components when installing this kit?
A: No, it's recommended to replace all components included in the kit for optimal performance. Reusing old gaskets, O-rings, or the needle valve can result in leaks or improper fuel metering.

Q: Do I need special tools to install this carburetor repair kit?
A: Basic hand tools (screwdrivers, wrenches) and carburetor cleaner are sufficient. A torque wrench is recommended for reassembly to ensure proper gasket sealing without over-tightening.

Q: What's the difference between OEM and aftermarket carburetor kits?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.