872096 876507 Steering Fork Bushing Kit for Volvo Penta | JLM Marine

Steering Fork Bushing Kit – Fits Volvo Penta AQ, SP, DP & DPX Series Drives | 872096 876507

This steering fork bushing kit is designed for a wide range of Volvo Penta sterndrive systems, including AQ290, SP-A/E, DP-A through DP-E, and DPX-C/R series drives. Engineered to OEM specifications, these bushings restore smooth, reliable steering operation in marine lower units and transom assemblies.

Direct replacement for Volvo Penta OEM part numbers 872096 and 876507, as well as GLM 23093. Precision-manufactured to match factory dimensions for reliable fitment and long service life.

• Sold as one complete pair of bushings
• High-quality marine-grade construction for saltwater and freshwater use
• Precision tolerances ensure smooth steering fork movement

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• One pair (2 pieces) of steering fork bushings

Installation Guide

1. Disconnect the battery and raise the sterndrive to the full-up position for access.
2. Remove the sterndrive unit from the transom assembly following the manufacturer's service manual.
3. Locate the steering fork on the gimbal housing and remove the retaining hardware.
4. Carefully extract the old bushings from the steering fork assembly using a bushing driver or press tool.
5. Clean the bushing bore thoroughly to remove any corrosion, debris, or old lubricant.
6. Lightly lubricate the new bushings with marine-grade grease to ease installation.
7. Press the new bushings into place, ensuring they are seated flush and square in the bore.
8. Reinstall the steering fork and secure all retaining hardware to the specified torque.
9. Reattach the sterndrive unit to the transom, aligning all mounting points carefully.
10. Reconnect the steering linkage and verify smooth, unrestricted movement through full lock-to-lock rotation.
11. Reconnect the battery and perform a function test on dry land before launching.
12. Inspect for any binding or unusual resistance; adjust or re-seat bushings if needed.

Troubleshooting & FAQ

Q: How do I confirm this fits my Volvo Penta drive?
A: Cross-reference your OEM part number (872096 or 876507) with the numbers listed above, or check the compatible drive models table. If your drive appears in the list and the dimensions match, this kit will fit.

Q: What are the signs that my steering fork bushings need replacement?
A: Common symptoms include excessive play in the steering wheel, binding or stiff steering, unusual clunking noises during turns, or visible wear and scoring on the old bushings during inspection.

Q: Can I install these bushings myself, or do I need special tools?
A: Installation requires removal of the sterndrive and use of a bushing driver or press. If you have mechanical experience and the proper tools, DIY installation is possible. Otherwise, professional installation is recommended to avoid damage.

Q: How often should I replace steering fork bushings?
A: Replacement intervals depend on usage and operating conditions. Inspect bushings annually or whenever the drive is serviced; replace them if you notice wear, cracking, or increased steering play.

Q: Will these aftermarket bushings perform the same as OEM parts?
A: Yes. These bushings are manufactured to OEM specifications using comparable marine-grade materials, ensuring reliable performance and fit equivalent to the original Volvo Penta parts.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.