CDI Ignition Module for Johnson Evinrude 4-60HP 1977-1984 | Replaces 581649 581927 582452
This CDI Ignition Module is designed to fit Johnson Evinrude 2-cylinder engines from 1977-1984 (4-60HP) that do not require an RPM limiter. It provides reliable ignition performance for a wide range of models including 4HP, 4.5HP, 6HP, 7.5HP, 8HP, 9.9HP, 15HP, 25HP, 30HP, 35HP, 40HP, 50HP, 55HP, and 60HP engines. This power pack ensures consistent spark delivery for optimal engine performance.
This module directly replaces multiple OEM part numbers including 113-2453, 581649, 581924, 581926, 581927, 582452, 583380, 583453, 592453, and aftermarket numbers 18-5758, 9-25002, providing broad compatibility across Johnson and Evinrude outboard motors from the late 1970s through mid-1980s.
- Fits 2-cylinder engines without RPM limiter requirement
- Compatible with multiple horsepower ratings from 4HP to 60HP
- Direct replacement for OEM power pack assemblies
Part Number Cross-Reference
Use this table to confirm equivalent part numbers across OEM and aftermarket brands.
| Brand |
Part Number |
| Johnson Evinrude (OEM) |
582452 |
| Johnson Evinrude |
113-2453 |
| Johnson Evinrude |
581649 |
| Johnson Evinrude |
581924 |
| Johnson Evinrude |
581926 |
| Johnson Evinrude |
581927 |
| Johnson Evinrude |
583380 |
| Johnson Evinrude |
583453 |
| Johnson Evinrude |
592453 |
| Aftermarket |
18-5758 |
| Aftermarket |
9-25002 |
Compatible Engine Models
Confirm your engine model/year in the table below.
| Brand |
Rated HP |
Years |
Notes |
| Johnson Evinrude |
4HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
4.5HP |
1980-1983 |
No RPM Limiter |
| Johnson Evinrude |
6HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
7.5HP |
1980-1983 |
No RPM Limiter |
| Johnson Evinrude |
8HP |
1984 |
No RPM Limiter |
| Johnson Evinrude |
9.9HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
15HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
25HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
30HP |
1984 |
No RPM Limiter |
| Johnson Evinrude |
35HP |
1977-1984 |
No RPM Limiter |
| Johnson Evinrude |
40HP |
1984 |
No RPM Limiter |
| Johnson Evinrude |
50HP |
1979-1984 |
No RPM Limiter |
| Johnson Evinrude |
55HP |
1979-1983 |
No RPM Limiter |
| Johnson Evinrude |
60HP |
1980-1984 |
No RPM Limiter |
Technical Specifications
| Specification |
Value |
| OEM Part Number |
582452 |
| Application |
Johnson Evinrude 2-Cylinder Engines |
| Horsepower Range |
4-60HP |
| Year Range |
1977-1984 |
| RPM Limiter |
No RPM Limiter Required |
| Part Type |
CDI Ignition Module / Power Pack |
Package Contents
- 1 × CDI Ignition Module (Power Pack)
Installation Guide
-
Disconnect the battery to ensure safety before beginning any electrical work.
-
Locate the existing CDI power pack on your engine, typically mounted near the flywheel assembly.
-
Label each wire connection before disconnecting to ensure correct reinstallation.
-
Remove the mounting bolts securing the old power pack to the engine block.
-
Carefully disconnect all electrical connectors from the old CDI module.
-
Position the new CDI module in the same location as the original unit.
-
Secure the new module with the mounting bolts.
-
Reconnect all electrical connectors according to your labels.
-
Inspect all wire routing to ensure wires are clear of moving parts.
-
Reconnect the battery and test the ignition system.
Important Notes
- This product is an aftermarket replacement part and is not an OEM component.
- Professional installation is recommended for optimal performance.
- Verify compatibility with your specific engine model before purchasing.