Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
Couldn't load pickup availability
Бесплатная стандартная доставка для всех заказов весом до 1 кг.
Вы можете вернуть большинство новых, нераспечатанных товаров в течение 30 дней с момента доставки для полного возврата средств. Мы также оплатим расходы на обратную доставку, если возврат является результатом нашей ошибки (вы получили неправильный или дефектный товар и т. д.).
Вы должны ожидать возврата денег в течение четырех недель с момента передачи посылки отправителю возврата, однако во многих случаях возврат денег будет произведен быстрее. Этот период времени включает в себя транзитное время, необходимое для получения нами вашего возврата от отправителя (от 5 до 10 рабочих дней), время, необходимое нам для обработки вашего возврата после его получения (от 3 до 5 рабочих дней), и время, необходимое вашему банку для обработки нашего запроса на возврат (от 5 до 10 рабочих дней).
Если вам нужно вернуть товар, просто войдите в свою учетную запись, просмотрите заказ с помощью ссылки «Выполнить заказы» в меню «Моя учетная запись» и нажмите кнопку «Вернуть товар(ы)». Мы уведомим вас по электронной почте о вашем возврате, как только получим и обработаем возвращенный товар.
This aftermarket Power Trim control unit replaces Volvo Penta 3855650. It is the helm panel switch used to operate sterndrive power trim and tilt — raising, lowering, and trimming the outdrive from the control station. It is not an engine sensor, and it is not a toggle-style trim switch on a control lever.
Match this part in this order:
1. OEM number on the removed control panel or in your parts catalog — 3855650, or superseded numbers 873617, 853846, or 3855560
2. Outdrive model stamped on the drive identification plate — DP, DPX, SP, or SX family listed below
3. Physical form — compare connector style and panel layout to the product images once media are uploaded
Confirm the OEM number and your sterndrive model designation before ordering. Do not match by engine displacement or boat year alone.
Use this table to confirm Volvo Penta numbers in the 3855650 Power Trim control unit path. Note that 3855560 and 3855650 are different numbers — verify which appears on your removed panel.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| Primary OEM Reference | Volvo Penta | 3855650 | Current Power Trim control unit |
| OEM supersession | Volvo Penta | 873617 | Earlier control panel; superseded by 3855650 |
| OEM supersession | Volvo Penta | 853846 | Earlier number in the same supersession path |
| OEM supersession | Volvo Penta | 3855560 | Related superseded / equivalent panel number (not the same digits as 3855650) |
Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Volvo Penta component.
Fitment is by sterndrive model designation, not by engine displacement or boat production year. Confirm the model stamped on your drive plate and the OEM number on the removed panel. Cross-check with the Parts Diagrams for your drive group when available.
| Brand | Drive / Application | Notes |
|---|---|---|
| Volvo Penta | DP-D1, DP-C, DP-E, DP-G | Duoprop sterndrives calling for 3855650 path |
| Volvo Penta | DPX | DPX series sterndrive power trim applications |
| Volvo Penta | SP-C1, SP-E | Single-propeller sterndrives |
| Volvo Penta | SX | SX series sterndrive power trim applications |
Important: Engine HP, displacement, and boat year alone do not confirm fitment. Always verify the drive model and the OEM number on the removed control panel.
| Specification | Value |
|---|---|
| Part type | Power Trim control unit (helm trim & tilt control panel) |
| Primary OEM number | 3855650 |
| Also replaces | 873617, 853846, 3855560 |
| System | Volvo Penta sterndrive power trim / tilt |
| Mounting | Helm / control-panel mount |
| Function | Operate drive trim angle and full tilt from the helm |
Disconnect the battery negative cable before working on trim or helm electrical circuits.
Locate the existing Power Trim control panel at the helm. Note the mounting fasteners and the wiring connector orientation, then carefully unplug the harness.
Compare the removed panel’s OEM number and connector style to this 3855650 replacement and to the product images. Do not force a mismatched connector.
Install the new control unit in the same panel opening, reconnect the harness fully seated, restore battery power, and test trim-up, trim-down, and full tilt before returning the boat to service.
Note: If the harness plug, panel cutout, or button arrangement does not match, stop and re-check the OEM number. Have a marine technician complete the install when trim hydraulics or wiring are unfamiliar.
This is an aftermarket JLM Marine replacement matched to Volvo Penta 3855650 and its related supersession numbers. It is not a genuine Volvo Penta part.
3855650 is the current Power Trim control unit number. 873617 and 853846 are earlier numbers in the same replacement path. 3855560 is a related superseded / equivalent panel number with different digits — confirm which number is stamped on your removed unit before ordering.
No. Match by the sterndrive model (DP, DPX, SP, or SX family listed above) and by the OEM number on the removed control panel.
No. This listing is a helm Power Trim control unit for Volvo Penta sterndrive trim and tilt. Sensors and pressure switches are different parts.
Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.
Для наших типичных клиентов из США и Канады сроки доставки следующие:
Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.
Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.
Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.
Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.
Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.
Thanks for subscribing!
This email has been registered!