Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
Camshaft Position Sensor 33220-84M10 – Fits Suzuki 9.9–20HP
- $125.99
- $125.99
- Unit price
- per
Couldn't load pickup availability
Бесплатная доставка
Бесплатная стандартная доставка для всех заказов весом до 1 кг.
Возврат без проблем
Узнать больше.
How to Match This Part
This aftermarket camshaft position (CMP) sensor replaces Suzuki Marine 33220-84M10 (also catalogued as 33220-84M10-000 / 3322084M10000). It mounts on the cylinder head, reads camshaft / cam-pulley position, and feeds the engine control module so sequential fuel injection and ignition stay synchronised on the Suzuki four-stroke outboards listed below.
Match this part in this order:
1. Number on the sensor you remove — 33220-84M10 or 33220-84M10-000
2. Engine model — DF9.9B, DF15A, or DF20A against the compatibility table
3. Body shape — compare the product images to your original sensor
Identify the sensor by form as well as by number. The unit is an L-shaped moulded black plastic body with a cylindrical probe barrel, a pre-fitted black O-ring on the barrel, a single flat mounting ear with a metal bushing for one retaining bolt, and a rectangular sealed 3-pin electrical connector. If your original sensor looks different or carries an unrelated Suzuki number, do not use this part even if the horsepower overlaps.
Part Number Cross-Reference
Use these verified Suzuki catalog numbers to confirm you have the correct camshaft position sensor. Brand names and OEM numbers are for identification only.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| OEM | Suzuki Marine | 33220-84M10 | Primary SENSOR ASSY / CMP listing number |
| OEM | Suzuki Marine | 33220-84M10-000 | Catalog form with -000 suffix (same assembly) |
| OEM | Suzuki Marine | 3322084M10000 | Compact catalog spelling (same assembly) |
This is an aftermarket part manufactured by JLM Marine. It is not sold as a genuine Suzuki Marine component.
Compatible Engine Models
Confirm your engine model and the number on the removed sensor before ordering. For Suzuki owners: Suzuki Outboard Parts Diagrams & Catalog.
| Engine Model | HP | Stroke | Notes |
|---|---|---|---|
| DF9.9B | 9.9 | 4-Stroke | Confirm 33220-84M10 on the removed sensor |
| DF15A | 15 | 4-Stroke | Confirm 33220-84M10 on the removed sensor |
| DF20A | 20 | 4-Stroke | Confirm 33220-84M10 on the removed sensor |
Horsepower alone is not enough — always match the OEM number and the connector / mounting form shown in the product images.
Technical Specifications
| Specification | Value |
|---|---|
| Part type | Camshaft position (CMP) sensor assembly |
| Primary OEM number replaced | 33220-84M10 |
| Catalog forms covered | 33220-84M10-000, 3322084M10000 |
| Engine brand | Suzuki Marine outboard |
| Mounting | Cylinder head; single-bolt mounting ear with metal bushing |
| Sealing | O-ring pre-fitted on the sensor barrel |
| Electrical interface | Rectangular sealed 3-pin connector |
| Condition | New unit (not remanufactured) |
Installation Guide
- 1Turn the ignition off and disconnect the negative battery cable before touching any engine wiring.
- 2Locate the CMP sensor on the cylinder head using your Suzuki parts diagram, release the connector lock, and unplug the harness.
- 3Remove the single retaining bolt from the mounting ear and withdraw the old sensor straight out of its bore. Confirm the old O-ring comes out with it and is not left inside the head.
- 4Wipe the bore clean of oil and debris, compare the old and new sensors side by side, and lightly lubricate the new O-ring with clean engine oil.
- 5Push the new sensor fully home without twisting the O-ring, align the mounting ear, then fit and tighten the bolt to the torque given in your Suzuki service manual.
- 6Reconnect the harness until the latch clicks, reconnect the battery, clear stored fault codes with a marine diagnostic tool if needed, then start the engine and confirm a steady idle and clean throttle response.
Note: Professional installation is recommended for camshaft position sensors on EFI four-stroke outboards.
Troubleshooting & FAQ
Important Notes
- Verify that the product images and the number on your original sensor match 33220-84M10 / 33220-84M10-000, including the L-shaped body, O-ring barrel, single mounting ear, and 3-pin connector. If anything differs, do not proceed even if your horsepower overlaps.
- This listing covers Suzuki DF9.9B, DF15A, and DF20A applications that use this SENSOR ASSY. Confirm fitment against your engine’s parts diagram when serial-specific diagrams are available.
- This is an aftermarket replacement and is not a genuine Suzuki Marine OEM component.
- Handle the sensor tip carefully. Dropping the sensor or forcing it into a dirty bore can damage the sealing surface and cause intermittent signal faults.
- Professional installation is recommended for camshaft position sensors on EFI four-stroke outboards.
Why Choose JLM MARINE?
- Precision Fit: Cross-referenced to Suzuki 33220-84M10 for the DF9.9B, DF15A, and DF20A applications listed above.
- Quality Control: Each batch is inspected for dimensional consistency and workmanship.
- Direct from Manufacturer: Aftermarket marine camshaft position sensors engineered for reliable timing feedback on Suzuki four-stroke outboards.
Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.
Для наших типичных клиентов из США и Канады сроки доставки следующие:
- Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
- Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
- Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.
Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.
Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.
Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.
Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.
Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.
Parts Finder
Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN.
Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
- Choosing a selection results in a full page refresh.