17400-99852 Water Pump Kit for Suzuki DF60 | JLM Marine

Water Pump Kit – Fits Suzuki DF60 (2009)

This water pump kit is engineered for Suzuki DF60 outboard engines manufactured in 2009. Designed to restore optimal cooling performance, this kit ensures your engine operates at safe temperatures, preventing overheating and prolonging engine life.

This kit directly replaces OEM part number 17400-99852, providing a reliable aftermarket solution for routine maintenance and repair. It delivers OEM-equivalent performance at a competitive price point.

• Complete water pump rebuild kit for comprehensive cooling system maintenance
• Designed for straightforward installation with standard hand tools
• Essential for preventing engine overheating and costly damage

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This water pump kit includes all necessary components for a complete rebuild:

• 17472-87E10 (Gasket) × 1
• 17471-99E00 (Plate) × 1
• 17461-87E12 (Impeller) × 1
• 09420-04009 (key) × 1
• 15410-87J30 (Fuel filter) × 1 View Part →
• 55321-87J00 (Zinc Anode) × 1
• 11265-87E10 (Protection cover gasket) × 1
• 16510-87J01 (Oil filter) × 1 View Part →
• 09168-12012 (Drain Gasket) × 1 View Part →
• 09168-10022 (Drain Gasket) × 2
• 09204-03003 (Cotter Pin) × 1
• 24OP149 (Gear Oil Pump) × 1

Note: Verify all components against your original parts before installation.

Installation Guide

1. Disconnect the battery and allow the engine to cool completely before beginning work.
2. Remove the lower unit from the outboard by loosening the mounting bolts and shifting into forward gear.
3. Access the water pump housing by removing the securing bolts and carefully separating the housing from the drive shaft.
4. Remove the old impeller and inspect the housing for scoring, corrosion, or debris. Clean thoroughly if needed.
5. Lubricate the new impeller with water pump grease or soapy water to ease installation.
6. Install the new impeller by rotating the blades in the correct direction (usually counterclockwise when viewed from above) and seating it fully in the housing.
7. Replace all gaskets, O-rings, and seals included in the kit, ensuring proper alignment and fit.
8. Reassemble the water pump housing onto the drive shaft, torquing bolts to manufacturer specifications.
9. Reinstall the lower unit to the outboard, ensuring the drive shaft engages properly with the crankshaft.
10. Reconnect the battery and perform a water flow test by running the engine with a flush attachment or in a test tank.
11. Check for leaks around all gasket surfaces and confirm strong water flow from the telltale outlet.
12. Dispose of old parts properly and record the service date for future maintenance tracking.

Troubleshooting & FAQ

Q: How do I confirm this water pump kit fits my Suzuki DF60?
A: Verify that your engine was manufactured in 2009 and cross-reference the OEM part number 17400-99852 with your service manual or parts diagram. If your engine model and year match the compatibility table above, this kit will fit.

Q: How often should I replace my water pump impeller?
A: Most manufacturers recommend replacing the water pump impeller every 2–3 years or every 200–300 hours of operation, whichever comes first. If you notice overheating, reduced water flow from the telltale, or suspect debris damage, replace it immediately.

Q: What are the signs that my water pump is failing?
A: Common symptoms include weak or no water flow from the telltale outlet, engine overheating alarms, steam from the engine, or loss of power. If you notice any of these signs, inspect and replace the water pump kit promptly to avoid serious engine damage.

Q: Can I reuse the old gaskets and seals when installing the new impeller?
A: No, you should always replace all gaskets, O-rings, and seals with the new components included in this kit. Reusing old seals can result in leaks and poor cooling performance.

Q: What's the difference between OEM and aftermarket water pump kits?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.