17400-92851 Water Pump Assembly for Suzuki DF140 | JLM Marine

Water Pump Assembly for Suzuki DF140 (2010-2012) | OEM 17400-92851

This water pump assembly is engineered to fit Suzuki DF140 four-stroke outboard engines manufactured between 2010 and 2012. It ensures reliable cooling system performance, protecting your engine from overheating during operation.

This aftermarket replacement directly cross-references OEM part number 17400-92851, delivering dependable compatibility and function for your Suzuki outboard.

• Direct replacement for Suzuki OEM 17400-92851
• Designed for DF140 models (2010-2012)
• Complete assembly for straightforward installation

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This listing includes:

• 17413-92J01 (Cup) × 1
• 17471-92J00 (Plate) × 1
• 09420-05009/6 (Key) × 1
• 17416-92J10 (Seal) × 1
• 17472-87E10 (Gasket) × 1
• 17461-90J00 (Impeller) × 1
• 15410-87J30 (Fuel filter) × 1 View Part →
• 55321-87J00 (Zinc Anode) × 4
• 11265-87E10 (Protection cover gasket) × 2
• 09280-22019 (O-ring) × 2
• 16510-92J00 (Oil filter) × 1 View Part →
• 09168-12012 (Drain Gasket) × 1 View Part →
• 09168-10022 (Drain Gasket) × 2
• 09280-56005 (O-ring) × 1
• 09280-70002 (O-ring) × 1
• 09280-60007 (O-ring) × 1
• 09204-03003 (Cotter Pin) × 1
• 24OP149 (Gear Oil Pump) × 1

Note: Verify all components match your original assembly before installation.

Installation Guide

1. Disconnect the battery and ensure the engine is off and cool before beginning work.
2. Remove the lower unit from the outboard by loosening the mounting bolts and carefully lowering it away from the engine.
3. Locate the water pump housing on the lower unit, typically positioned above the propeller shaft.
4. Remove the old water pump assembly by unscrewing the retaining bolts and carefully pulling it free from the driveshaft.
5. Clean all mating surfaces thoroughly to remove old gasket material, debris, and corrosion.
6. Install the new water pump assembly onto the driveshaft, ensuring the impeller blades face the correct direction (usually counterclockwise for Suzuki).
7. Apply marine-grade grease to the impeller and housing to ease installation and prevent dry starts.
8. Align the water pump housing with the mounting holes and secure it with new gaskets and bolts, torquing to manufacturer specifications.
9. Reinstall the lower unit onto the outboard, ensuring proper alignment of the driveshaft and water tube.
10. Reconnect all fasteners and torque to the specified values in your service manual.
11. Reconnect the battery and start the engine in a test tank or on-water to verify proper water flow from the tell-tale.
12. Inspect for leaks around the pump housing and lower unit seals during the first few minutes of operation.

Troubleshooting & FAQ

Q: How do I confirm this water pump assembly fits my Suzuki DF140?
A: Check your engine's year of manufacture (2010-2012) and verify your original OEM part number is 17400-92851. You can also reference the Suzuki parts diagrams linked above to cross-check compatibility.

Q: How often should I replace the water pump on my outboard?
A: Most manufacturers recommend replacing the water pump impeller every 2-3 years or 200-300 hours of use, whichever comes first. If you notice reduced water flow from the tell-tale or engine overheating, inspect and replace the pump immediately.

Q: What are the signs that my water pump is failing?
A: Common symptoms include weak or no water flow from the tell-tale (indicator stream), engine running hotter than normal, steam from the engine, or an overheating alarm. Address these issues immediately to prevent engine damage.

Q: Does this assembly include the impeller and housing, or do I need to purchase them separately?
A: This is a complete water pump assembly as listed in the package contents. Verify the product images match your original unit to ensure all necessary components are included.

Q: What's the difference between OEM and aftermarket water pump assemblies?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.