> > > >

Trim Cylinder Ram Cap – Fits Mercury Marine Alpha One Gen II (Replaces 19-815951, Sierra 18-2466-9)

Vendor: JLM Marine
Availability: In Stock
Product Type: Outboard Cover
$22.99
$9.00
$22.99
Subtotal: $22.99

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Trim Cylinder Ram Cap – Fits Mercury Marine Alpha One Gen II (Replaces 19-815951, Sierra 18-2466-9)

Trim Cylinder Ram Cap – Fits Mercury Marine Alpha One Gen II (Replaces 19-815951, Sierra 18-2466-9)

$9.00 $22.99

Fitment answer

Fits the published Alpha One (Gen II) drive records listed below

Match key: Mercury Alpha One (Gen II) drive family and the serial-number ranges shown below.

Primary reference
OEM 19-815951
Product form
Trim cylinder ram end cap
Construction
Snap-on plastic cap

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

19-815951

Brand / Family
Mercury Alpha One (Gen II)
Years
1991, 1992, 1993, 1994, 1995
Serial / Note
0D469859–0F679999

19-815951

Brand / Family
Mercury Alpha One (Gen II)
Years
1996, 1997
Serial / Note
0F680000–0K999999

19-815951

Brand / Family
Mercury Alpha One (Gen II)
Years
Year is not the primary fitment key.
Serial / Note
0L100040 & Up; published from 1998

Part Numbers & What You Get

On a phone, each row stacks into a card.

Part number cross-reference
Type Full number Relationship
OEM 19-815951 Primary reference
OEM 8M0214953 Replacement reference published on the original product page
Aftermarket Sierra 18-2466-9 Published cross-reference
Aftermarket Mallory 9-77201 Published cross-reference
GLM 26490 Catalog cross-reference for OEM 19-815951

Package contents

  • 1 × Trim Cylinder Ram End Cap

Each trim cylinder requires two caps. Select the package quantity that matches the service being performed.

Key Specifications

Product form
Trim cylinder ram end cap
Installation
Snap-on
Housing material
Plastic
Housing color
Black
Fitting type
Cap pin cover clip
Service quantity
2 caps per trim cylinder

Easy-to-Miss Differences

  • This is a snap-on protective end cap, not a trim cylinder, anchor pin, bushing, or a complete hardware kit.
  • One trim cylinder uses two caps. Servicing both trim cylinders requires four caps; package quantity is selected separately.
  • This page publishes Alpha One (Gen II) drive records only. Vazer application details are not included because the prior listing did not publish complete year data.

JLM Marine Advantage

More than 20 years of marine-parts manufacturing experience. This high-quality aftermarket replacement is engineered to meet or exceed applicable OEM specifications. Every unit is 100% inspected before release.

  • Factory-direct pricing
  • You may return any eligible item within 7 calendar days of delivery for any reason.
  • Technical support from the people who make the parts

Aftermarket product: Not a genuine Mercury part. Brand names and part numbers identify compatible applications only.

Installation Notes

  1. Secure the raised sterndrive in accordance with the applicable service procedure before working near the trim cylinders.
  2. Remove the existing cap from the pivot-pin area, then clean grease and debris from the pin and surrounding surface.
  3. Align the new cap over the pin and press evenly by hand until the cap snaps into place.
  4. Repeat for the remaining cap locations required by the service, then operate the trim system in a safe area to confirm free movement.

FAQ

What does this trim cylinder ram cap replace?

The primary reference is Mercury OEM 19-815951. The original product page also publishes 8M0214953, Sierra 18-2466-9, and Mallory 9-77201 as cross-references.

How many caps are needed for a service?

Each trim cylinder requires two caps. Two trim cylinders therefore use four caps in total; select the package quantity accordingly.

Is this a complete trim-cylinder repair kit?

No. This listing is for the snap-on end cap only. It does not include the trim cylinder, anchor pin, bushing, washer, or retaining hardware.

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.

Сопутствующие товары

Недавно просмотренные продукты