Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
🔎 Mercury 850 (4 CYL.) Reference Library — Exploded parts diagrams (22 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 850 (4 CYL.) is a 85 HP 4-stroke outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke |
| Horsepower | 85 HP |
| Displacement | — |
| Bore x Stroke | — |
| Spark Plug (Type & Gap) | — |
| Engine Oil Capacity | — |
| Recommended Engine Oil | SAE 10W-30 4-Stroke Marine Oil |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | — |
| Full Throttle RPM Range | — |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 850 (4 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 850 (4 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-8963A1 | COWL, BOTTOM Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | PAD, SOUND - DRIP TRAY |
| 4 | 10-48408 | SCREW, DRIP TRAY TO BOTTOM COWL (1/2") |
| 5 | 32-8M0108355 | HOSE, DRIP TRAY TO BOTTOM COWL (8") |
| 6 | 39616 | BOOT, CONTROL CABLES - BOTTOM COWL |
| 7 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 8 | 37445 | SUPPORT, WIRING HARNESS - BOTTOM COWL |
| 9 | 10-69029 | SCREW, SUPPORT TO COWL (1 3/4") |
| 10 | 11-826709109 | NUT, WIRING HARNESS SUPPORT SCREW |
| 11 | 32-8M0108355 | HOSE, TELL TALE - EXH. COVER TO BOTTOM COWL (16" OR 9") |
| 12 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 13 | 10-48408 | SCREW, TELL TALE NOZZLE TO BOTTOM COWL (1/2") |
| 14 | 54-48123 | CLAMP, TELL TALE HOSE TO CONNECTOR AND ELBOW |
| 15 | 22-996642 | ELBOW, TELL TALE HOSE TO EXHAUST COVER |
| 16 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER (LONG SHAFT) |
| 17 | 93960A1 | COUPLING, SHIFT SHAFT |
| 18 | 23-26600 | BUSHING, SHIFT SHAFT |
| 19 | 73402 | LINK ROD ASSEMBLY |
| 20 | 12-35462 | WASHER, LINK ROD (SHIFT LEVER END) |
| 21 | 11-826709109 | NUT, LINK ROD |
| 22 | 13-29720 | WASHER, WAVE - LINK ROD |
| 23 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 24 | 37896 | GUIDE BLOCK, LINK ROD |
| 25 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 26 | 39519 | CAP, BARREL RETAINER - ANCHOR BRACKET |
| 27 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 28 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 29 | 39667 | COVER, NYLON - SHIFT CABLE |
| 30 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 31 | 10-35386 | SCREW, ANCHOR BRACKET TO CYLINDER BLOCK (1") |
| 32 | 52100 | WEAR PLATE, LINK ROD |
| 33 | 8M0036768 | LATCH, CONTROL CABLE FASTENING - ANCHOR BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1368-5688A4 | CARBURETOR ASSEMBLY, COMPLETE Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 6 | 1395-83181 | INLET NEEDLE, SEAT AND GASKET |
| 9 | 10-52195 | SCREW, FLOAT BOWL COVER (SHORT) |
| 10 | 10-52196 | SCREW, FLOAT BOWL COVER (LONG) |
| 11 | 13-26995 | LOCKWASHER, FLOAT BOWL COVER SCREW |
| 12 | 1399-4559 | COVER, FLOAT BOWL Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 13 | 27-25851 | GASKET, STRAINER COVER (LARGE) Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 14 | 1399-3938 | SCREEN, FILTER Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 15 | 27-25849 | GASKET, STRAINER COVER (SMALL) Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 16 | 1399-4791A1 | COVER, STRAINER (LOWER CARBURETOR) Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 18 | 10-25822 | SCREW, STRAINER COVER FASTENING Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 19 | 1395-5680 | COVER, FLOAT BOWL Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 20 | 1395-5733 | JET, BOWL VENT Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 21 | 1395-4805 | SCREEN, FILTER Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 22 | 1395-5734 | HOSE, ECONOMIZER Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 23 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 24 | 8146791 | LEVER, THROTTLE STOP (SEE NOTE BOTTOM) |
| 25 | 1395-7942 | SHAFT, THROTTLE |
| 27 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 29 | 1395-9017 | SHUTTER, THROTTLE |
| 31 | 1399-3515 | SCREW, IDLE ADJUSTMENTS |
| 32 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 34 | 1399-3796 | JET, MAIN FUEL (.076) - STANDARD Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 36 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 39 | 1395-51091 | REPAIR PARTS KIT (1 PER CARBURETOR) Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 40 | 27-481641 | GASKET, CARBURETOR FLANGE Comment: (Contents of Carb Repair Kit) |
| 41 | 11-29250 | NUT, CARBURETOR MOUNTING STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 54293A10 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, HARNESS LEAD TO CHOKE SOLENOID |
| 3 | 11-68219 | NUT, WIRE HARNESS LEAD TO CHOKE SOLENOID |
| 4 | 10-25299 | SCREW, CHOKE SOLENOID ATTACHING (3/4") |
| 5 | 13-8M0204647 | LOCKWASHER, CHOKE SOLENOID ATTACHING SCREW |
| 6 | 90548A1 | PLUNGER/LINK ASS'Y, CHOKE SOLENOID |
| 7 | 52518 | CLUSTER, THROTTLE LEVER |
| 8 | 1395-6027 | SCREW, CLUSTER TO THROTTLE LEVER |
| 9 | 1368-5688A4 | CARBURETOR ASSEMBLY, COMPLETE Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 10 | 53720A2 | THROTTLE PICK-UP COUPLING ASSEMBLY |
| 11 | 10-66104 | SCREW, THROTTLE COUPLING MOUNTING (3/4") |
| 12 | 28-89694 | INSERT, THROTTLE COUPLING |
| 13 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR (7/8") |
| 14 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 15 | 11-8M0207775 | NUT, CHOKE ROD SPRING TO CARBURETOR STUD |
| 16 | 24-48230 | SPRING, TENSION - CHOKE ROD |
| 17 | 90242A1 | KNOB, CHOKE ROD |
| 18 | 25-20116 | GROMMET, CHOKE ROD |
| 19 | 49589 | STRAP, CHOKE KNOB TO CHOKE ROD |
| 20 | 10-29794 | SCREW, STRAP TO CHOKE KNOB (3/8") |
| 21 | 13-26996 | LOCKWASHER, STRAP SCREW |
| 22 | 48203 | ROD, CHOKE |
| 23 | 10-69022 | SCREW, STRAP TO CHOKE ROD |
| 24 | 11-46438 | NUT, STRAP TO CHOKE ROD SCREW |
| 25 | 48152 | SHUTTER, CHOKE - CARBURETOR |
| 26 | 16-69037 | STUD, FILTER SCREEN TO CARBURETOR (1 1/8") |
| 27 | 11-20110 | NUT, CHOKE SHUTTER STUD |
| 28 | 35-57819 | SCREEN, FILTER - CARBURETOR |
| 29 | 10-23015 | SCREW, FILTER SCREEN TO CARBURETOR |
| 30 | 24-57818 | SPRING, FILTER SCREEN |
| 31 | 11-20110 | NUT, CARBURETOR SCREEN SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 3 | 12-70988 | WASHER, THUMB SCREW Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 13 | 10-68299 | BOLT, CLAMP BRACKET TO TRANSOM (3") |
| 14 | 12-68300 | WASHER, CLAMP BRACKET BOLT |
| 15 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 16 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 17 | 76386 | TILT LOCK ASSEMBLY, STARBOARD |
| 18 | 76385T | TILT LOCK ASSEMBLY, PORT |
| 19 | 47802 | TUBE, TILT LOCK |
| 20 | 18-47959 | COTTER PIN, TILT LOCK TUBE |
| 21 | 23-47803 | BUSHING, TILT LOCK TUBE |
| 22 | 13-69150 | WASHER, WAVE - TILT LOCK TUBE |
| 23 | 87431 | REVERSE LOCK ASSEMBLY |
| 24 | 24-29821 | SPRING, REVERSE LOCK TENSION |
| 25 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 26 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 27 | 55-28414 | PIN, LOWER SHOCK MOUNTING - (LONG SHAFT) |
| 28 | 10-21937 | SCREW, LOWER SHOCK PIN (2")- (LONG SHAFT) |
| 29 | 11-8M0207775 | NUT, LOWER SHOCK PIN SCREW- (LONG SHAFT) |
| 30 | 55-58780A7 | SHOCK ABSORBER |
| 31 | 23-28199 | SPACER, UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 32 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 33 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 34 | 23-32171 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) |
| 35 | 23-28198 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) |
| 36 | 12-8M0204648 | WASHER, UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 37 | 10-69375A1 | SCREW, UPPER AND LOWER SHOCK MOUNTING PIN (3/4") |
| 38 | 70679 | COVER, UPPER AND LOWER SHOCK MOUNTING PIN |
| 39 | 10-37655 | SCREW, COVER TO SHOCK MOUNTING SCREWS (1/2") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2182-7927A8 | COWL FRONT COVER ASSEMBLY Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 2 | 56849 | KNOB, COWL FRONT COVER FASTENING |
| 3 | 12-30771 | WASHER, COVER FASTENING KNOB (RUBBER) |
| 4 | 12-59572 | WASHER, COVER FASTENING KNOB (STEEL) |
| 5 | 24-30772 | SPRING, TENSION - COVER FASTENING KNOB |
| 6 | 17-29077 | ROLL PIN, TENSION SPRING TO KNOB |
| 7 | 71040 | BLANKET, SOUND ABSORBING Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 7A | 71040 | SEAL, SOUND ABSORBING Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 7B | 38674 | BLANKET, SOUND ABSORBING Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 8 | 54143 | SEAL, SOUND - UPPER |
| 9 | 2119-3248A16 | WRAP AROUND COWL ASSEMBLY |
| 10 | 46785A1 | COWL LATCH ASSEMBLY |
| 11 | 30413 | HOOK, COWL LATCH FASTENING |
| 12 | 92-86166Q1 | GLUE, ADHESIVE - SOUND BLANKET FASTENING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 440-9074A2 | CRANKSHAFT ASSEMBLY |
| 2 | 30-62567T | BEARING, BALL - UPPER |
| 3 | 30-63742T | BEARING, BALL - LOWER |
| 4 | 54196A6 | CARRIER ASSEMBLY, "O" RING |
| 5 | 65800 | PACKING, CARRIER |
| 6 | 540-5266T5 | MAIN BEARING ASSEMBLY (VALVE TYPE) Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 7 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 8 | 10-45775 | SCREW, MAIN BEARING CLAMPING |
| 9 | 11-45774 | NUT, MAIN BEARING CLAMPING SCREW |
| 10 | 34-56007A1 | REED SET, MATCHED - MAIN BEARING |
| 11 | 34-56008 | REED STOP, MAIN BEARING REED VALVES |
| 12 | 10-62204 | SCREW, REED STOP MOUNTING |
| 13 | 11-53153 | NUT, REED STOP MOUNTING SCREW |
| 14 | 535-5397A4 | CENTER MAIN BEARING ASSEMBLY Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 15 | 17-20032 | DOWEL PIN, CENTER MAIN BEARING |
| 16 | 29-714221 | BEARING, NEEDLE |
| 17 | 26113T | RACE, OUTER (PAIR) |
| 18 | 53-26933 | RING, SNAP - OUTER RACE CLAMPING |
| 19 | 10-22968 | SCREW, CENTER MAIN BEARING CLAMPING |
| 20 | 11-8M0207775 | NUT, MAIN BEARING CLAMPING SCREW |
| 21 | 17-47246 | DOWEL PIN (STEPPED) |
| 22 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 23 | 53-857196 | LOCK RING, PISTON PIN |
| 24 | 39-78816A12 | RING, PISTON |
| 25 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 26 | 10-54803 | SCREW, CAP TO CONNECTING ROD |
| 27 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 28 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 29 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 30 | 39-78811A12 | RING, PISTON (.015) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 847-5340A4 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 2 | 27-53650 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 16-64936 | STUD, CARBURETOR MOUNTING (1 3/16") |
| 4 | 16-64281 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (1 7/8") |
| 5 | 17-43044 | PIN, DOWEL - CRANKCASE TO CYLINDER BLOCK |
| 6 | 17-63779 | PIN, DOWEL - CYLINDER BLOCK TO MAIN BEARING |
| 7 | 66517 | RESTRICTOR, CRANKCASE BLEED |
| 8 | 16-64282 | STUD, CYLINDER BLOCK EXHAUST EXTENSION PLATE (4") |
| 9 | 10-32293 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 3/4") |
| 10 | 10-69091 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 5/8") |
| 11 | 12-22753 | WASHER, CRANKCASE TO CYLINDER BLOCK SCREW (LOWER) |
| 12 | 11-29250 | NUT, CRANKCASE FASTENING SCREW |
| 13 | 10-20359 | SCREW, CENTER MAIN BEARING LOCKING (1") |
| 14 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 15 | 22-65367 | CONNECTOR, CYLINDER BLEED HOSE - UPPER Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 16 | 32-9938779 | HOSE, UPPER CYLINDER BLEED (12") Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 17 | 21-64871A2 | CHECK VALVE ASSEMBLY, BLEED HOSE Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 18 | 21-42657A3 | CHECK VALVE ASSEMBLY Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 19 | 54-20387 | CLAMP, BLEED HOSE TO CONNECTOR Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 20 | 32-8M0108355 | TUBE, BALANCE - MAIN BEARING (6 1/4") Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 21 | 22-130342 | TEE, BLEED HOSE TO CYLINDER BLOCK - LOWER |
| 22 | 32-9938779 | HOSE, CYLINDER BLEED - LOWER (6 1/2") Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 23 | 22-20781 | ELBOW, BALANCE TUBE TO CRANKCASE Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 24 | 21-42866 | CHECK VALVE ASSEMBLY, BLEED HOSE - TOP Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 25 | 21-42657A3 | CHECK VALVE ASSEMBLY Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 26 | 32-9938779 | HOSE, CYLINDER BLEED (15 1/2") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 27 | 21-64871A2 | CHECK VALVE ASSEMBLY, BLEED HOSE - BOTTOM Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 28 | 32-8M0108355 | HOSE ASSEMBLY, BALANCE (6 1/4") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 29 | 22-20781 | ELBOW, BALANCE Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 2 | 32197 | STOP, SPARK ADVANCE - DISTRIBUTOR HOUSING |
| 3 | 17-27962 | PIN, ANCHOR SPRING - DISTRIBUTOR HOUSING |
| 4 | 24-27944 | SPRING, HORSESHOE - DISTRIBUTOR HOUSING |
| 5 | 12-53540 | WASHER, ECONOMIZER COLLAR - DISTRIBUTOR HOUSING |
| 6 | 55804A1 | ECONOMIZER COLLAR ASSEMBLY |
| 7 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER |
| 8 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 9 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR |
| 10 | 25996A1 | SWIVEL AND LINK ROD ASSEMBLY Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 11 | 11-29598 | NUT, UPPER LINK ROD ADJUSTING Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 12 | 37588 | ROD, LINK - UPPER Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 12A | 67468 | ROD, LINK - UPPER Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 13 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 14 | 48562 | LEVER, THROTTLE CONTROL |
| 15 | 13-39954 | WASHER, WAVE - THROTTLE CONTROL LEVER SWIVEL |
| 16 | 12-8M0204649 | WASHER< THROTTLE CONTROL LEVER SWIVEL |
| 17 | 11-35888 | NUT, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 18 | 10-31830 | SCREW, THROTTLE LEVER TO EXHAUST COVER (1 3/4") |
| 19 | 12-8M0042641 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 20 | 23-45818 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 21 | 11-8M0204726 | NUT, THROTTLE CONTROL LEVER SCREW |
| 22 | 37587 | SWIVEL, LOWER - THROTTLE CONTROL LEVER TO THROTTLE CABLE |
| 23 | 11-35888 | NUT, THROTTLE CABLE TO LOWER SWIVEL |
| 24 | 48692 | COLLAR, THROTTLE ACTUATOR |
| 25 | 10-61658 | SCREW, ADJUSTING - ACTUATOR COLLAR (1 3/4") |
| 26 | 11-64015 | NUT, THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 27 | 52023 | CAP, NYLON - THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 28 | 48671 | PLATE, THROTTLE ACTUATOR |
| 29 | 10-37892 | SCREW, THROTTLE ACTUATOR PLATE TO ECONOMIZER COLLAR (1") |
| 30 | 12-30164 | WASHER, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 31 | 13-26996 | LOCKWASHER, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 32 | 23-48674 | SPACER, THROTTLE ACTUATOR PLATE SCREW |
| 33 | 54239 | CAM, THROTTLE ACTUATOR PLATE |
| 34 | 12-46246 | WASHER, ADAPTOR - DISTRIBUTOR HOUSING |
| 35 | 66165A2 | ADAPTOR ASSEMBLY, DISTRIBUTOR Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 36 | 22-25094 | FITTING, GREASE - DISTRIBUTOR ADAPTOR |
| 37 | 10-73657 | SCREW, DISTRIBUTOR HOUSING TO CRANKCASE (1 1/2") |
| 38 | 12-20084 | WASHER, DISTRIBUTOR HOUSING SCREW |
| 39 | 11-22053 | NUT, DISTRIBUTOR HOUSING SCREW Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 40 | 55805 | BRACKET, STOP |
| 41 | 10-28636 | SCREW, STOP BRACKET TO DISTRIBUTOR ADAPTOR (3/4") |
| 42 | 12-35462 | WASHER, STOP BRACKET FASTENING SCREW |
| 43 | 10-24228 | SCREW, STOP BRACKET ADJUSTING (1 7/8") |
| 44 | 11-20890 | NUT, STOP BRACKET ADJUSTING SCREWS |
| 45 | 52023 | CAP, NYLON - STOP BRACKET ADJUSTING SCREWS |
| 46 | 12-27939 | WASHER, DISTRIBUTOR HOUSING |
| 47 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 48 | 13-27959 | WASHER, WAVE - DISTRIBUTOR BALL BEARING TENSION |
| 49 | 54567 | CAP, DISTRIBUTOR HOUSING |
| 50 | 23-47250 | SPACER, DRIVE PULLEY |
| 51 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 52 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 53 | 29907 | FLANGE, DRIVEN PULLEY |
| 54 | 28-29910 | KEY, DISTRIBUTOR DRIVER |
| 55 | 10-68554 | SCREW, PULLEY CLAMPING SCREW |
| 56 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 30-20066 | BALL BEARING< DISTRIBUTOR HOUSING (UPPER) |
| 2 | 11-54209 | NUT, ROTOR SHAFT TO DISTRIBUTOR HOUSING |
| 3 | 23-53539 | SLEEVE, ROTOR SHAFT |
| 4 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 5 | 53417 | GROUND STRAP ASSEMBLY, DISTRIBUTOR TO CRANKCASE |
| 6 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| 7 | 58807A1 | FLAME ARRESTOR ASSEMBLY, DISTRIBUTOR HOUSING |
| 8 | 15-21148A1 | SHIM, ROTOR |
| 9 | 15-55853 | SHIM, ROTOR |
| 10 | 23-53538 | SPACER, ROTOR SHAFT |
| 11 | 393-3236 | DISC, ROTOR |
| 12 | 30-26379 | BALL BEARING, DISTRIBUTOR HOUSING (LOWER) |
| 13 | 53-26406 | RING, RETAINING - BALL BEARING TO DISTRIBUTOR HOUSING |
| 14 | 393-4371 | ROTOR, DISTRIBUTOR |
| 15 | 54-60768 | CLAMP, DISTRIBUTOR CAP TO DISTRIBUTOR HOUSING |
| 16 | 10-65774 | SCREW, DISTRIBUTOR CAP CLAMP (1 1/8") |
| 17 | 11-26768 | NUT, DISTRIBUTOR CAP CLAMP SCREW |
| 18 | 84-821945A9 | CABLE ASSEMBLY, CAP TO COIL Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 19 | 25-56474 | GROMMET, CABLE (7/8") |
| 20 | 332-2854T01 | BOOT, CABLE TO COIL |
| 21 | 85-94589 | SLEEVE, CABLE |
| 22 | 32-46398 | SLEEVE, (LEADS 1, 2, 3, 4) - 3/4") |
| 23 | 27-55896 | GASKET, DISTRIBUTOR CAP TO DISTRIBUTOR HOUSING |
| 24 | 393-3726A10 | DISTRIBUTOR CAP ASSEMBLY |
| 25 | 393-1293A1 | BRUSH AND SPRING ASSEMBLY |
| 26 | 58807A1 | FLAME ARRESTOR ASSEMBLY |
| 27 | 63319 | RETAINER, LEADS |
| 28 | 10-46378 | SCREW, LEAD RETAINER (1") |
| 29 | 11-20013 | NUT, RETAINER SCREW |
| 30 | 33-896329827 | SPARK PLUG (CHAMP L-77V) |
| 31 | 84-813715A1 | SPARK PLUG LEAD ASSEMBLY #1, #2, #3, #4 Comment: ORDER A-36549A1 KIT FOR REPLACEMENT OF LEAD WIRE MARKERS |
| 32 | 85-63709A1 | PROTECTOR, SPARK PLUG LEAD |
| 33 | 32-46768 | SLEEVE, SPARK PLUG LEAD (LEADS 1, 2, 3, 4) |
| 34 | 85-94589 | SLEEVE, SPARK PLUG LEAD TO DISTRIBUTOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1573-5239A4 | DRIVE SHAFT HOUSING ASSEMBLY (LONG SHAFT) Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 2 | 16-56295 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (2 11/16") |
| 3 | 19-64649 | PLUG, PLASTIC - TRIM TAB SCREW HOLE |
| 4 | 16-34378 | STUD, DRIVE SHAFT HOUSING TO HSG. PLATE (2 5/6") |
| 5 | 37417 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 6 | 10-57807 | SCREW, TRIM COVER TO BOTTOM COWL (3/4") |
| 7 | 25-92012 | GROMMET, TRIM COVER SCREW |
| 7A | 46933A2 | GROUND STRAP ASSEMBLY, TRIM COVER SCREW |
| 7B | 10-62568 | SCREW, GROUND STRAP ATTACHING |
| 8 | 32-60897 | TUBE, WATER INLET - LONG SHAFT |
| 9 | 78184T | TUBE, EXHAUST - - LONG SHAFT Comment: UNITED STATES 3739628 AND UP AUSTRALIA 8013015 AND UP BELGIUM 9053364 AND UP CANADA 7024073 AND UP |
| 9A | 65638 | BOOT, EXHAUST TUBE Comment: UNITED STATES 3739628 AND UP AUSTRALIA 8013015 AND UP BELGIUM 9053364 AND UP CANADA 7024073 AND UP |
| 10 | 10-28636 | SCREW, EXHAUST TUBE TO EXHAUST EXTENSION PLATE (3/4") - SERI Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 11 | 13-26992 | LOCKWASHER, EXHAUST SCREW Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 12 | 27-66335 | GASKET, DRIVE SHAFT HOUSING PLATE TO DRIVE SHAFT HSG. Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 13 | 52887 | GUIDE, PUSH ROD - REVERSE LOCKING |
| 14 | 47558 | ROD, PUSH - REVERSE LOCK (LONG SHAFT) |
| 15 | 11-69254 | NUT, JAM - PUSH ROD |
| 16 | 47559 | YOKE, PUSH ROD |
| 17 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK |
| 18 | 18-25191 | COTTER PIN, PUSH ROD PIN |
| 19 | 75296 | MOUNT, RUBBER - UPPER |
| 20 | 12-47840 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 21 | 12-31263 | WASHER, UPPER MOUNT BOLT |
| 22 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 23 | 75298 | MOUNT, RUBBER - LOWER |
| 24 | 10-75284 | SCREW, UPPER MOUNT (5 1/2") |
| 25 | 12-49339 | WASHER, MOUNT SCREW |
| 26 | 11-25096 | NUT, MOUNT SCREW |
| 27 | 25067 | BUMPER, RUBBER - MOUNTING SCREW |
| 28 | 11-8M0204653 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 29 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 30 | 11-29489 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 31 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 32 | 35608 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 33 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 34 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING (7/8") |
| 35 | 35474T | COVER, LOWER MOUNT CLAMP |
| 36 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 37 | 10-29722 | SCREW, COVER TO LOWER CLAMP MOUNT (5/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 847-5340A4 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 2 | 1134-3197A1 | END CAP ASSEMBLY, UPPER |
| 3 | 26-41953 | OIL SEAL |
| 4 | 25-47254 | "O" RING |
| 5 | 15-47248A1 | SHIM ASSEMBLY, END CAP TO CRANKCASE (.006-8-10) |
| 6 | 10-30225 | SCREW, END CAP MOUNTING (1") |
| 7 | 43352 | POINTER, TIMING Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 8 | 10-28636 | SCREW, TIMING POINTER ATTACHING (3/4") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 9 | 12-35462 | WASHER, TIMING POINTER SCREW Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 10 | 1148-5410T1 | END CAP ASSEMBLY, LOWER Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 11 | 21-42657A3 | CHECK VALVE ASSEMBLY, END CAP Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 12 | 26-41953 | OIL SEAL, UPPER |
| 13 | 25-32546 | "O" RING |
| 14 | 15-20085A1 | SHIM, END CAP TO CRANKCASE (.002-3-5-10) |
| 15 | 10-30225 | SCREW, END CAP MOUNTING (1") |
| 16 | 27-73665 | GASKET, WATER JACKET COVER Comment: - PART OF CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 17 | 76303 | COVER, WATER JACKET - CYLINDER BLOCK Comment: - PART OF CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 18 | 10-53167T | SCREW, WATER JACKET COVER TO CYLINDER BLOCK (7/8") Comment: - PART OF CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 19 | 12-8M0042642 | WASHER, WATER JACKET COVER FASTENING SCREW Comment: - PART OF CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 20 | 27-854981 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 21 | 64107 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 22 | 27-854961 | GASKET, BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 23 | 64108 | COVER, EXHAUST MANIFOLD |
| 24 | 10-53576 | SCREW, MANIFOLD COVER MOUNTING (1 1/8") |
| 25 | 22-328022 | PLUG, PIPE - EXHAUST MANIFOLD COVER Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 26 | 1021-7699 | COVER, CYLINDER BLOCK |
| 27 | 27-85493 | GASKET, CYLINDER BLOCK COVER |
| 28 | 10-21091 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/8") |
| 29 | 11-8M0207775 | NUT, COVER MOUNTING SCREW |
| 30 | 22-328022 | PLUG, PIPE - CYLINDER BLOCK COVER Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 31 | 62301 | COVER, TRANSFER PORT - BOTTOM |
| 32 | 27-62107 | GASKET, TRANSFER PORT COVER |
| 33 | 10-49668 | SCREW, TRANSFER PORT COVER MOUNTING (3/4") |
| 34 | 37440 | BRACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 35 | 10-35386 | SCREW, BRACKET TO CYLINDER BLOCK (1") |
| 36 | 46933A1 | GROUND STRAP ASSEMBLY, EXHAUST COVER SCREW |
| 37 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 43289A2 | PLATE ASSEMBLY, EXHAUST EXTENSION Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 2 | 23-27132 | BUSHING, NYLON - EXHAUST EXTENSION PLATE Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 3 | 17-23784 | DOWEL PIN, EXHAUST EXTENSION PLATE |
| 4 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 5 | 99358 | STRIP, RETAINING - EXHAUST EXTENSION PLATE |
| 6 | 10-37571 | SCREW, SEAL AND RETAINING STRIP TO EXHAUST PLATE (1/2") |
| 7 | 27-692381 | GASKET, POWERHEAD TO EXHAUST EXTENSION PLATE |
| 8 | 10-66023 | SCREW, ADAPTOR PLATE TO HOUSING PLATE (2") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 9 | 13-8M0204647 | LOCKWASHER, ADAPTOR PLATE SCREW Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 10 | 10-66023 | SCREW, HOUSING PLATE TO DRIVE SHAFT HOUSING (2") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 11 | 11-69254 | NUT, CRANKCASE STUDS TO EXHAUST EXTENSION PLATE |
| 12 | 12-20553 | WASHER, CRANKCASE STUDS TO EXHAUST EXTENSION PLATE |
| 13 | 27-661021 | GASKET, PLATE TO DRIVE SHAFT HSG. PLATE Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 14 | 12-34437 | WASHER, DRIVE SHAFT HOUSING STUD Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 15 | 11-64809 | NUT, DRIVE SHAFT HOUSING STUD Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 16 | 26-60898 | SEAL, DRIVE SHAFT HOUSING PLATE |
| 17 | 43543A1 | PLATE ASSEMBLY, DRIVE SHAFT HOUSING Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 18 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE (DRIVE SHAFT HOUSING PLATE) |
| 19 | 17-23784 | DOWEL PIN, DRIVE SHAFT HOUSING PLATE |
| 20 | 27-69860 | GASKET, DRIVE SHAFT HOUSING PLATE TO EXHAUST TUBE |
| 21 | 65032 | EXHAUST TUBE |
| 22 | 10-65414 | SCREW, EXHAUST TUBE TO DRIVE SHAFT HOUSING PLATE (3/4") |
| 23 | 13-26992 | LOCKWASHER, EXHAUST PLATE SCREW |
| 24 | 12-20553 | WASHER, POWERHEAD STUDS |
| 25 | 11-82671013 | NUT, POWERHEAD STUDS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 2 | 11-52901 | NUT, FLYWHEEL |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 225-2494A37 | FLYWHEEL ASSEMBLY, COMPLETE Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 5 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL |
| 6 | 10-69088 | SCREW, PLATE/HUB TO FLEXIBLE PLATE Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 7 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 8 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 9 | 30306 | PULLEY, FLYWHEEL |
| 10 | 29787 | HUB, FLYWHEEL PULLEY |
| 11 | 398-5232 | STATOR ALTERNATOR Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 13 | 10-63136 | SCREW, STATOR TO UPPER END CAP (7/8") |
| 14 | 54-22875 | CLIP, STATOR LEAD FASTENING (1/2") Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 15 | 10-62568 | SCREW, STATOR LEAD FASTENING (3/8") |
| 16 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 58888A4 | FUEL PUMP ASSEMBLY |
| 2 | 21-8M0084276 | CHECK VALVE ASSEMBLY |
| 3 | 55278A5 | DIAPHRAGM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 8 | 10-69067 | SCREW, PUMP MOUNTING (1 3/8") |
| 9 | 22-19688 | FITTING, FUEL PUMP (OUTLET) |
| 10 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 11 | 32-8M0108355 | FUEL LINE, FUEL PUMP TO FILTER COVER (4 1/2") |
| 12 | 70929 | BASE, FUEL PUMP |
| 13 | 10-70939 | SCREW, BASE TO TRANSFER PORT COVER |
| 14 | 12-20533 | WASHER, BASE SCREW |
| 15 | 35-59072 | SCREEN, FILTER - INLET |
| 16 | 25-35480 | "O" RING, COVER TO HOUSING |
| 17 | 35-91078A1 | COVER, FUEL INLET |
| 18 | 27-25848 | GASKET, NYLON - FILTER COVER SCREW |
| 19 | 10-37370 | SCREW, COVER TO FUEL PUMP (5/8") |
| 20 | 22-64705 | FITTING, FILTER BASE |
| 21 | 32-8M0108355 | FUEL LINE, FILTER COVER TO CARBURETOR (8 7/8") |
| 22 | 22-66328 | FITTING, TEE - UPPER CARBURETOR |
| 23 | 32-8M0108355 | FUEL LINE, CARBURETOR TO CARBURETOR (6 1/4") |
| 24 | 22-19688 | FITTING, ELBOW - LOWER CARBURETOR |
| 25 | 22-64705 | FITTING, FUEL LINE TO FUEL PUMP (INLET) |
| 26 | 32-8M0108355 | FUEL LINE, ADAPTOR TO FUEL PUMP (12 1/2") |
| 27 | 22-63981 | ELBOW, FUEL LINE TO ADAPTOR |
| 28 | 30188 | CUP WASHER, ADAPTOR |
| 29 | 25-16524 | "O" RING, ADAPTOR STEM |
| 30 | 24-23067T | SPRING, ADAPTOR STEM Comment: UNITED STATES 4153350 AND UP AUSTRALIA 8030640 AND UP BELGIUM 9086164 AND UP CANADA 7054483 AND UP |
| 31 | 23069 | STEM, CHECK UNIT ADAPTOR Comment: UNITED STATES 4153350 AND UP AUSTRALIA 8030640 AND UP BELGIUM 9086164 AND UP CANADA 7054483 AND UP |
| 32 | 22833 | ADAPTOR, CHECK UNIT (FUEL LINE) Comment: UNITED STATES 4153350 AND UP AUSTRALIA 8030640 AND UP BELGIUM 9086164 AND UP CANADA 7054483 AND UP |
| 33 | 10-69029 | SCREW, ADAPTOR TO BOTTOM COWL (1 3/4") |
| 34 | 11-826709109 | NUT, ADAPTOR FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 58888A4 | FUEL PUMP ASSEMBLY |
| 2 | 21-8M0084276 | CHECK VALVE ASSEMBLY |
| 3 | 55278A5 | DIAPHRAGM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 8 | 10-69067 | SCREW, PUMP MOUNTING (1 3/8") |
| 9 | 32-55827A1 | FUEL LINE ASSEMBLY, PUMP TO CARBURETOR (9 1/2") |
| 10 | 22-59351 | ELBOW, UPPER CARBURETOR |
| 11 | 22-30175 | SLEEVE, UPPER CARBURETOR ELBOW |
| 12 | 22-30177 | NUT, UPPER CARBURETOR ELBOW |
| 13 | 32-59352 | FUEL LINE, CARBURETOR TO CARBURETOR (6 5/8") |
| 14 | 22-30468 | CONNECTOR, FUEL PUMP |
| 15 | 22-30175 | SLEEVE, CONNECTOR |
| 16 | 22-30177 | NUT, CONNECTOR |
| 17 | 32-55829 | FUEL LINE, ADAPTOR TO UPPER FUEL PUMP (15") |
| 18 | 30186 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 19 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 20 | 24-30189 | SPRING, ADAPTOR STEM |
| 21 | 25-16524 | "O" RING, ADAPTOR STEM |
| 22 | 30188 | CUP WASHER, ADAPTOR |
| 23 | 10-69029 | SCREW, ADAPTOR TO BOTTOM COWL (1 3/4") |
| 24 | 11-8M0207775 | NUT, ADAPTOR FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1623-6052A4 | GEAR HOUSING ASSEMBLY Comment: UNITED STATES 4153350 AND UP AUSTRALIA 8030640 AND UP BELGIUM 9086164 AND UP CANADA 7054483 AND UP |
| 2 | 23-56513 | SLEEVE, LUBRICATION |
| 3 | 17-8M0084726 | PIN, GEAR HOUSING |
| 4 | 16-57921 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (4") |
| 5 | 16-8M0133358 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 1/16") |
| 6 | 16-8M0034463 | STUD, WATER PUMP BASE AND BODY TO GEAR HOUSING (3 3/8") |
| 7 | 16-306671 | STUD, WATER PUMP BASE AND BODY TO GEAR HOUSING (3 1/8") |
| 8 | 31-32898T | BEARING, ROLLER - DRIVE SHAFT |
| 9 | 45-59116A1 | DRIVE SHAFT ASSEMBLY (LONG SHAFT) |
| 10 | 24-34576 | SPRING, COMPRESSION - DRIVE SHAFT |
| 11 | 17-30545 | PIN, COMPRESSION SPRING RETAINING |
| 12 | 43-56518 | GEAR, PINION - DRIVE SHAFT |
| 13 | 11-35921 | NUT, PINION GEAR TO DRIVE SHAFT |
| 14 | 15-57007A1 | SHIM, TAPERED ROLLER BEARING TO GEAR HOUSING (.002-3-5-10) |
| 15 | 31-33138A1 | TAPERED ROLLER BEARING ASSEMBLY, DRIVE SHAFT |
| 16 | 27-8M0214962 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 17 | 25-8M0214923 | "O" RING, WATER PUMP BASE |
| 18 | 46-58618A1 | WATER PUMP BASE ASSEMBLY |
| 19 | 26-94038 | OIL SEAL, WATER PUMP BASE |
| 20 | 26-55682 | OIL SEAL, WATER PUMP BASE |
| 21 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP |
| 22 | 27-8M0090319 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 23 | 8M0204677 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 24 | 27-858524 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 25 | 46-96148T1 | WATER PUMP BODY ASSEMBLY |
| 26 | 48752T | INSERT, WATER PUMP BODY |
| 28 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 29 | 47-89984T4 | IMPELLER, WATER PUMP |
| 30 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 31 | 10-30720 | SCREW, WATER PUMP BODY TO GEAR HOUSING (2 1/4") |
| 32 | 13-26992 | LOCKWASHER, WATER PUMP BODY SCREW |
| 33 | 12-8M0204649 | WASHER, WATER PUMP BODY FASTENING SCRW AND STUD |
| 34 | 11-826709109 | NUT, WATER PUMP BODY FASTENING STUD |
| 35 | 12-36001 | WASHER, WATER PUMP BODY FASTENING STUD |
| 36 | 11-826709111 | NUT, WATER PUMP BODY FASTENING STUD |
| 37 | 25-8M0214918 | RING, RUBBER - CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 38 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 39 | 37641001 | SEAL, EXHAUST TUBE Comment: - NOT PART OF GEAR HOUSING COMPLETE UNITED STATES 3739628 AND UP AUSTRALIA 8013015 AND UP BELGIUM 9053364 AND UP CANADA 7024073 AND UP |
| 40 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL Comment: - NOT PART OF GEAR HOUSING COMPLETE UNITED STATES 3739628 AND UP AUSTRALIA 8013015 AND UP BELGIUM 9053364 AND UP CANADA 7024073 AND UP |
| 41 | 76062A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 42 | 53-29641 | "E" RING, RETAINING, LOWER SHIFT SHAFT |
| 43 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 44 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 45 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 46 | 12-31266 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 47 | 78036 | SPACER, LOWER - REVERSE LOCKING |
| 48 | 43308T1 | CAM, REVERSE LOCKING |
| 49 | 22-8M0058389 | PLUG, DRAIN (MAGNETIC) Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 50 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 51 | 19-48750 | PLUG, GEAR HOUSING FLUSHING HOLE |
| 52 | 12-8M0204663 | WASHER, GEAR HOUSING FLUSHING HOLE PLUG |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1623-6052A4 | GEAR HOUSING ASSEMBLY Comment: SEE PAGE 38 FOR BREAKDOWN UNITED STATES 4153350 AND UP AUSTRALIA 8030640 AND UP BELGIUM 9086164 AND UP CANADA 7054483 AND UP |
| 53 | 760394 | CAM, SHIFT |
| 54 | 30625 | FOLLOWER, CAM |
| 55 | 30624 | SLIDE, CROSS PIN |
| 56 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 57 | 15-30923A1 | SHIM, BEARING OUTER RACE TO GEAR HSG. (.002-3-5-10) |
| 58 | 31-30894A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 59 | 31-30895T | BEARING, ROLLER - FORWARD GEAR |
| 60 | 43-56517T3 | FORWARD GEAR ASSEMBLY |
| 61 | 52-822539T | RATCHET, SLIDING CLUTCH |
| 62 | 17-8M0100263 | PIN, CROSS - RATCHET TO0 PROPELLER SHAFT |
| 63 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 64 | 44-93003 | SHAFT, PROPELLER |
| 65 | 43-56516T | REVERSE GEAR ASSEMBLY |
| 66 | 15-29955A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 67 | 12-71143A1 | WASHER, THRUST - BEARING CARRIER TO GEAR HOUSING |
| 68 | 30-31265 | BEARING, BALL - REVERSE GEAR |
| 69 | 25-29976 | "O" RING, BEARING CARRIER |
| 70 | 52132T1 | BEARING CARRIER ASSEMBLY |
| 71 | 31-30956T | BEARING, ROLLER - BEARING CARRIER |
| 72 | 26-8M0204670 | OIL SEAL, BEARING CARRIER |
| 73 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 74 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 75 | 52699 | COVER, GEAR HOUSING |
| 76 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 77 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 78 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 79 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 80 | 10-65210 | SCREW, GEAR HOUSING TO DRIVE SHAFT HOUSING (1") |
| 81 | 65091Q01 | THRUST HUB Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 82 | 12-29590 | WASHER, CUPPED - THRUST HUB Comment: UNITED STATES 3865694 AND BELOW AUSTRALIA 8017139 AND BELOW BELGIUM 9053363 AND BELOW CANADA 7033027 AND BELOW |
| 83 | 12-31211Q03 | WASHER, SPLINED - PROPELLER NUT |
| 84 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 85 | 11-52707Q1 | NUT, PROPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 53168A1 | HEAVY DUTY WATER PUMP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-2986A27 | SWITCH BOX ASSEMBLY, COMPLETE |
| 2 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 3 | 10-69028 | SCREW, SWITCH BOX TO FRONT SUPPORT BRACKET (3/4") |
| 4 | 11-8M0207775 | NUT, SWITCH BOX TO FRONT SUPPOR BRACKET SCREW |
| 5 | 78614A1 | RECTIFIER ASSEMBLY, COMPLETE |
| 6 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 7 | 10-76621 | SCREW, RECTIFIER TO BOTTOM COWL (7/8") |
| 8 | 13-22773 | LOCKWASHER, RECTIFIER MOUNTING SCREW |
| 9 | 59757 | BRACKET, RETAINER - HIGH TENSION LEAD |
| 10 | 10-22956 | SCREW, RETAINER BRACKET TO FRONT SUPPORT BRACKET (7/8") |
| 11 | 12-8M0204649 | WASHER, RETAINER BRACKET FASTENING SCREW |
| 12 | 11-8M0207775 | NUT, RETAINER BRACKET SCREW |
| 13 | 50-58788A3 | STARTER MOTOR ASSEMBLY (FOR BREAKDOWN, SEE ACCESSORY SECTION Comment: (FOR BREAKDOWN, SEE ACCESSORY SECTION "E" |
| 14 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 15 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 16 | 10-31984 | SCREW, STARTER MOTOR TO CRANKCASE FLANGE (1 3/8") |
| 17 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR SCREW |
| 18 | 52691 | BRACKET, SUPPORT - STARTER MOTOR |
| 19 | 13-26992 | LOCKWASHER, THRU BOLT - BRACKET TO STARTER MOTOR |
| 20 | 11-20013 | NUT, THRU BOLT - BRACKET TO STARTER MOTOR |
| 21 | 10-37562 | SCREW, STARTER MOTOR BRACKET TO CRANKCASE (1") |
| 22 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR BRACKET FASTENING SCREW |
| 23 | 84-93389A12 | WIRE, STARTER MOTOR TO STARTER SOLENOID AND TOP MOUNT |
| 24 | 10-69035 | SCREW, GROUND WIRE TO STARTER MOTOR (5/8") |
| 25 | 25661T1 | STARTER SOLENOID |
| 26 | 10-69028 | SCREW, STARTER SOLENOID TO COIL BRACKET (3/4") |
| 27 | 13-26992 | LOCKWASHER, STARTER SOLENOID MOUNTING SCREW |
| 28 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 29 | 11-22053 | NUT, SOLENOID TERMINAL - INSIDE (5/16") |
| 30 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 31 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 32 | 52902 | CABLE, STARTER SOLENOID TO STARTER MOTOR |
| 33 | 52771A2 | WIRING HARNESS (INTERNAL) |
| 34 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 35 | 10-45862 | SCREW, WIRING HARNESS CLAMP TO BOTTOM COWL (7/8") |
| 36 | 13-26996 | LOCKWASHER, WIRING HARNESS CLAMP SCREW |
| 37 | 12-847883 | WASHER, WIRING HARNESS CLAMP SCREW |
| 38 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 39 | 54-26550 | CLAMP, WIRING HARNESS TO COIL BRACKET |
| 40 | 10-69079 | SCREW, WIRING HARNESS CLAMP TO COIL BRACKET |
| 41 | 8M0084613 | "D" WASHER, WIRING HARNESS CLAMP |
| 43 | 10-98256 | SCREW, WIRING HARNESS LEAD TO BOTTOM COWL (1/2") |
| 44 | 13-26992 | LOCKWASHER, WIRING HARNESS LEAD SCREW |
| 45 | 332-4895A5 | IGNITION COIL ASSEMBLY, COMPLETE |
| 46 | 10-46368 | SCREW, IGNITION COIL CLAMPING (2 1/4") |
| 47 | 11-8267086 | NUT, IGNITION COIL CLAMPING SCREW |
| 48 | 10-37941 | SCREW, IGNITION COIL TO BOTTOM COWL (1 3/4") |
| 49 | 13-26992 | LOCKWASHER, IGNITION COIL SCREW |
| 50 | 10-88488 | SCREW, IGNITION COIL TO BOTTOM COWL (3 1/4") |
| 51 | 23-52933 | SPACER, COIL BRACKET TO BOTTOM COWL |
| 52 | 11-8M0207775 | NUT, IGNITION COIL SCREW |
| 53 | 10-45218 | SCREW, IGNITION COIL WIRE TO SWITCH BOX (3/8") |
| 54 | 269011 | BUMPER, IGNITION COIL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-2986A27 | SWITCH BOX ASSEMBLY, COMPLETE |
| 2 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 3 | 10-64279 | SCREW, SWITCH BOX TO FRONT SUPPORT BRACKET (3/4") |
| 4 | 11-8M0207775 | NUT, SWITCH BOX TO FRONT SUPPORT BRACKET SCREW |
| 5 | 8M0058226 | RECTIFIER ASSEMBLY, COMPLETE |
| 6 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 7 | 10-30405 | SCREW, RECTIFIER TO FRONT SUPPORT BRACKET (5/8") |
| 8 | 12-30164 | WASHER, RECTIFIER MOUNTING SCREW |
| 9 | 11-46438 | NUT, RECTIFIER MOUNTING SCREW |
| 10 | 59757 | BRACKET, RETAINER - HIGH TENSION LEAD |
| 11 | 10-28636 | SCREW, RETAINER BRACKET TO FRONT SUPPORT TO BRACKET (3/4") |
| 12 | 12-8M0204649 | WASHER, RETAINER BRACKET FASTENING SCREW |
| 13 | 50-67341 | STARTER MOTOR ASSEMBLY Comment: (FOR BREAKDOWN, SEE ACCESSORY SECTION |
| 14 | 11-64015 | NUT, STARTER MOTOR TERMINAL |
| 15 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 16 | 10-31984 | SCREW, STARTER MOTOR TO CRANKCASE FLANGE (1 3/8") |
| 17 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR SCREW |
| 18 | 67331 | BRACKET, SUPPORT - STARTER MOTOR |
| 19 | 13-26992 | LOCKWASHER, THRU BOLT - BRACKET TO STARTER MOTOR |
| 20 | 11-20013 | NUT, THRU BOLT - BRACKET TO STARTER MOTOR |
| 21 | 10-37562 | SCREW, STARTER MOTOR BRACKET TO CRANKCASE (1") |
| 22 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR BRACKET FASTENING SCREW |
| 23 | 84-93389A12 | WIRE, STARTER MOTOR TO SUPPORT BRACKET |
| 24 | 10-69035 | SCREW, GROUND WIRE TO STARTER MOTOR (5/8") |
| 25 | 89-853654A1 | STARTER SOLENOID |
| 26 | 10-38601 | SCREW, STARTER SOLENOID TO COIL BRACKET (5/8") |
| 27 | 13-26992 | LOCKWASHER, STARTER SOLENOID MOUNTING SCREW |
| 28 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 29 | 11-8M0204668 | NUT, SOLENOID TERMINAL - INSIDE (5/16") |
| 30 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 31 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 32 | 84-93389A1 | CABLE, STARTER SOLENOID TO STARTER MOTOR |
| 33 | 84-66055A1 | WIRING HARNESS (INTERNAL) |
| 34 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 35 | 10-690201 | SCREW, WIRING HARNESS CLAMP TO BOTTOM COWL (7/8") |
| 36 | 13-8M0204647 | LOCKWASHER, WIRING HARNESS CLAMP SCREW |
| 37 | 12-30164 | WASHER, WIRING HARNESS CLAMP SCREW |
| 38 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 39 | 10-98256 | SCREW, WIRING HARNESS LEAD TO BOTTOM COWL (1/2") |
| 40 | 13-26992 | LOCKWASHER, WIRING HARNESS LEAD SCREW |
| 41 | 332-4895T2 | IGNITION COIL ASSEMBLY |
| 42 | 72015 | PAD, RUBBER - IGNITION COIL |
| 43 | 63195 | COVER, IGNITION COIL |
| 44 | 10-88856 | SCREW, COIL TO CYLINDER BLOCK (2") |
| 44A | 12-30164 | WASHER, COIL SCREW |
| 45 | 84-60466A1 | CABLE ASSEMBLY |
| 46 | 10,13-26996 | LOCKWASHER, IGNITION COIL TERMINAL |
| 47 | 10,11-45076 | NUT, IGNITION COIL TERMINAL |
| 48 | 84-66054A1 | CABLE ASSEMBLY, COIL TO SWITCH BOX |
| 49 | 10-62568 | SCREW, IGNITION COIL WIRE TO SWITCH BOX (3/8") |
| 50 | 69190 | PLATE, COIL MOUNTING Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY (LONG SHAFT) |
| 2 | 23-69132 | BUSHING, REVERSE LOCK PIVOT SHAFT Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 3 | 23-69341 | BUSHING , SWIVEL BRACKET Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 4 | 12-69342 | WASHER, SWIVEL PIN - UPPER Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 5 | 26-37448 | OIL SEAL, SWIVEL BRACKET |
| 6 | 10-47828 | SCREW, DRIVE - SWIVEL BRACKET |
| 7 | 22-69059 | FITTING, GREASE |
| 8 | 19-77633Q | LUBRICAP, SWIVEL BRACKET GREASE FITTING |
| 9 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING |
| 10 | 12-37429 | WASHER, SWIVEL PIN - LOWER |
| 11 | 28205T | STRAP STOP, DRIVE SHAFT HOUSING TO SWIVEL BRACKET |
| 12 | 10-28200 | SCREW, STRAP STOP TO DRIVE SHAFT HOUSING (2 7/8") |
| 13 | 11-25269 | NUT, STRAP STOP FASTENING SCREW |
| 14 | 73984T | YOKE, BOTTOM |
| 15 | 11-37424 | NUT, SWIVEL PIN RETAINING |
| 16 | 17-49840A1 | SWIVEL PIN AND STEERING ARM ASSEMBLY (LONG SHAFT) |
| 17 | 28203 | BUMPER, STEERING ARM |
| 18 | 10-49554 | BOLT, STEERING ARM TO UPPER MOUNT (5 7/8") |
| 19 | 11-8M0204653 | NUT, STEERING ARM BOLT FASTENING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2114-3806 | COWL,TOP |
| 2 | 52733A9 | RETAINER ASSEMBLY, TOP COWL |
| 3 | 35496 | PAD, BUMPER - TOP COWL RETAINER |
| 5 | 10-74824 | SCREW, RETAINER TO TOP COWL (1 1/4") |
| 6 | 13-39107 | LOCKWASHER, RETAINER FASTENING SCREW |
| 7 | 76370 | SHIELD, TOP COWL - REAR |
| 9 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 10 | 52739 | HINGE, COWL LATCH - TOP COWL |
| 11 | 94918F1 | LEVER, COWL LATCH HINGE |
| 12 | 17-58998 | PIN, COWL LATCH LEVER TO HINGE |
| 13 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 14 | 13-26992 | LOCKWASHER, REAR HOOK MOUNTING SCREW |
| 15 | 10-22956 | SCREW, REAR HOOK TO TOP COWL (7/8") |
| 16 | 47341A11 | ROPE, STARTER (FOR MANUAL STARTING ONLY) |
| 17 | 79897A4 | FRAME, TOP COWL SUPPORT Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 18 | 37-65601 | DECAL, TIMING - TOP COWL FRAME Comment: UNITED STATES 3865695 THRU 4092964 AUSTRALIA 8017140 THRU 8025614 BELGIUM 9053364 THRU 9069878 CANADA 7033028 THRU 7044107 |
| 19 | 90435 | MOUNT, RUBBER - TOP COWL FRAME |
| 20 | 11-35888 | NUT, RUBBER MOUNT TO TOP COWL FRAME |
| 21 | 52468 | BRACKET, TOP COWL SUPPORT - REAR |
| 22 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 23 | 13-26992 | LOCKWASHER, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 24 | 11-29598 | NUT, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 25 | 10-37562 | SCREW, REAR BRACKET TO FRAME (1") Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 26 | 11-60049 | NUT, REAR BRACKET SCREW Comment: UNITED STATES 4092964 AND BELOW AUSTRALIA 8025614 AND BELOW BELGIUM 9069878 AND BELOW CANADA 7044107 AND BELOW |
| 27 | 13-8M0204647 | LOCKWASHER, REAR BRACKET SCREW Comment: UNITED STATES 4092965 AND UP AUSTRALIA 8025615 AND UP BELGIUM 9069879 AND UP CANADA 7044108 AND UP |
| 28 | 10-37562 | SCREW, REAR SUPPORT BRACKET TO BOTTOM COWL (1") |
| 29 | 13-8M0204647 | LOCKWASHER, REAR SUPPORT BRACKET SCREW |
| 30 | 66521A2 | BRACKET, SUPPORT - FRONT Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
| 31 | 10-71908 | SCREW, FRONT SUPPORT BRACKET TO BOTTOM COWL (1-5/8") |
| 32 | 11-60049 | NUT, FRONT SUPPORT BRACKET SCREW |
| 33 | 10-55511 | SCREW, FRONT BRACKET TO TOP COWL FRAME (1 1/2") |
| 34 | 53-26933 | LOCKWASHER, FRONT SUPPORT BRACKET SCREW |
| 35 | 37640 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 36 | 13-8M0204647 | LOCKWASHER, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 37 | 11-28770 | NUT, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 38 | 58124A7 | SWITCH, MERCURY |
| 39 | 10-37571 | SCREW, MERCURY SWITCH TO FRONT SUPPORT BRACKET (1/2") |
| 40 | 10-62568 | SCREW, MERCURY SWITCH LEAD (3/8") |
| 41 | 54-8M0024808 | "J" CLAMP, STATOR LEADS |
| 42 | 84-93388A1 | GROUND STRAP ASSEMBLY, FRONT SUPPORT BRK. Comment: UNITED STATES 3865695 AND UP AUSTRALIA 8017140 AND UP BELGIUM 9053364 AND UP CANADA 7033028 AND UP |
Regular maintenance keeps your Mercury 850 (4 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
