Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
OEM and aftermarket replacement parts for Mercury 650 (4 CYL.). Scroll down for exploded parts diagrams (20), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 650 (4 CYL.) Reference Library — Exploded parts diagrams (20 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 650 (4 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 65 HP |
| Displacement | 2100 cc |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 5.2 L (5.5 quart) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | 650 ± 25 RPM (in gear) |
| Full Throttle RPM Range | 4500-5500 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 650 (4 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 650 (4 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-3807 | COWL, BOTTOM |
| 2 | 37415A1 | TRIM MOULDING ASSEMBLY, BOTTOM COWL |
| 3 | 38046 | SPLICER, TRIM MOULDING - REAR |
| 4 | 10-29226 | SCREW, DECORATIVE - MOULDING TO BOTTOM COWL |
| 5 | 12-24671 | WASHER, FIBER - MOULDING FASTENING SCREW |
| 6 | 11-29225 | NUT, NYLON CAP - MOULDING FASTENING SCREW |
| 7 | 13-26995 | LOCKWASHER, MOULDING FASTENING SCREW |
| 8 | 11-26419 | NUT, BRASS - MOULDING FASTENING SCREW |
| 9 | 37920A1 | COVER PLATE ASSEMBLY, BOTTOM COWL |
| 10 | 37940 | PAD, SOUND - COVER PLATE |
| 11 | 10-8M0113176 | SCREW, COVER PLATE TO BOTTOM COWL |
| 12 | 37638 | BOOT, CONTROL CABLES - BOTTOM COWL |
| 13 | 23760 | BAFFLE, BOTTOM COWL |
| 14 | 10-21106 | SCREW, BAFFLE TO BOTTOM COWL |
| 15 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 16 | 37445 | SUPPORT, WIRING HARNESS - BOTTOM COWL |
| 17 | 10-21937 | SCREW, WIRING HARNESS SUPPORT TO BOTTOM COWL (2") |
| 18 | 11-8M0207775 | NUT, WIRING HARNESS SUPPORT SCREW |
| 19 | 32-8M0108355 | HOSE, TELL TALE - EXHAUST COVER TO BOTTOM COWL (16") |
| 20 | 22-291112 | CONNECTOR, TELL TALE HOSE TO BOTTOM COWL |
| 21 | 22-996642 | ELBOW, TELL TALE HOSE TO EXHAUSE COVER |
| 22 | 54-22976 | CLAMP, TELL TALE HOSE TO CONNECTOR AND ELBOW |
| 23 | 27-47257 | GASKET, POWERHEAD TO EXHAUST EXTENSION PLATE |
| 24 | 56306A2 | PLATE ASSEMBLY, EXHAUST EXTENSION |
| 26 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 27 | 38448 | RETAINER, WATER TUBE SEAL |
| 28 | 10-69069 | SCREW, RETAINER TO EXTENSION PLATE (3/4") |
| 29 | 10-56500 | SCREW, EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 30 | 11-8M0207775 | NUT, EXHAUST EXTENSION PLATE SCREW |
| 31 | 27-38471 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 32 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 33 | 99358 | STRIP, RETAINING - EXHAUST EXTENSION PLATE SEAL |
| 34 | 10-37571 | SCREW, SEAL AND STRIP TO EXHAUST EXTENSION PLATE |
| 35 | 37824 | BRACKET, SHIFT SHAFT HOLD DOWN |
| 36 | 10-41228 | SCREW, HOLD DOWN BRACKET TO EXHAUST EXTENSION PLATE |
| 37 | 49905A2 | SHIFT SHAFT ASSEMBLY, UPPER(LONG SHAFT) |
| 38 | 46069A1 | LINK ROD ASSEMBLY(NOT AS SHOWN) |
| 39 | 13-29720 | WASHER, WAVE - LINK ROD |
| 40 | 11-8267089 | NUT, LINK ROD TO SHIFT SHAFT |
| 41 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 42 | 38802 | CAP, BRASS BARREL OF THROTTLE CABLE |
| 43 | 10-35386 | SCREW, ANCHOR BRACKET TO CYLINDER BLOCK (1") |
| 44 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 45 | 37896 | GUIDE BLOCK, LINK ROD |
| 46 | 12-37905 | WASHER, NYLON - LINK ROD |
| 47 | 8M0036768 | LATCH, CONTROL CABLE FASTENING - ANCHOR BRACKET |
| 48 | 12-69056 | WASHER, CONTROL CABLE LATCH LINK ROD |
| 49 | 11-8267089 | NUT, LINK ROD |
| 50 | 49932A1 | LEVER, CONTROL CABLE LOCKING - ANCHOR BRACKET |
| 51 | 24-37911 | SPRING, CONTROL CABLE LOCKING LEVER |
| 52 | 17-239281 | PIN, ROLL - CONTROL CABLE LOCKING LEVER |
| 53 | 24-38472 | SPRING, CONTROL CABLE TENSION - ANCHOR BRACKET |
| 54 | 46933A1 | GROUND STRAP ASS'Y, CRANKCASE TO BOTTOM COWL Comment: LATE MODEL ONLY |
| 55 | 46933A2 | GROUND STRAP ASS'Y, DRIVE SHAFT HOUSING TO COWL Comment: LATE MODEL ONLY |
| 56 | 10-45218 | SCREW, GROUND STRAP ATTACHING (3/8") Comment: LATE MODEL ONLY |
| 57 | 13-69432 | WASHER, GROUND STRAP SCREW Comment: LATE MODEL ONLY |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 1399-3039 | REPAIR PARTS KIT (1 PER CARBURETOR) |
| 1 | 1335-3016 | CARBURETOR ASSEMBLY, COMPLETE (KC-5B) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 3 | 17-20853 | PIN, FLOAT LEVER PINION |
| 4 | 1399-102 | LEVER, FLOAT (LOWER) |
| 5 | 1399-101 | LEVER, FLOAT (UPPER) |
| 6 | 1395-92581 | INLET NEEDLE, SEAT AND GASKET |
| 7 | 27-25033 | GASKET, INLET SEAT |
| 8 | 1399-99 | GASKET, FLOAT BOWL COVER |
| 9 | 1399-1133 | COVER, FLOAT BOWL |
| 10 | 10-22625 | SCREW, FLOAT BOWL COVER (SHORT) |
| 11 | 10-25850 | SCREW, FLOAT BOWL COVER (LONG) |
| 12 | 27-25851 | GASKET, STRAINER COVER (LARGE) |
| 13 | 1399-3938 | SCREEN, FILTER |
| 14 | 27-25849 | GASKET, STRAINER COVER (SMALL) |
| 15 | 1399-4791A1 | COVER, STRAINER |
| 16 | 27-25848 | GASKET, STRAINER COVER SCREW |
| 17 | 10-25822 | SCREW, STRAINER COVER FASTENING |
| 18 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 19 | 8146791 | LEVER, THROTTLE STOP (SEE NOTE BELOW) |
| 20 | 1399-2012 | SHAFT, THROTTLE |
| 21 | 1399-2534 | TUBE, IDLE |
| 22 | 27-23180 | GASKET, IDLE TUBE |
| 23 | 10-20858 | SCREW AND LOCKWASHER, THROTTLE SHUTTER |
| 24 | 1399-2180 | SHUTTER, THROTTLE |
| 25 | 24-27160 | SPRING, IDLE ADJUSTMENT SCREW |
| 26 | 1399-1713 | SCREW, IDLE ADJUSTMENT |
| 27 | 10-28405 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 28 | 27-28406 | GASKET, JET CHANNEL PLUG SCREW |
| 29 | 1399-1459 | JET, MAIN FUEL (.059) |
| 30 | 27-28409 | GASKET, MAIN FUEL JET |
| 31 | 1399-3034 | NOZZLE, MAIN |
| 32 | 10-28846 | SCREW, PLUG - MAIN NOZZLE |
| 33 | 24-20869 | SPRING, THROTTLE SHAFT RETURN (UPPER CARBURETOR) |
| 34 | 19-32299 | WELCH PLUG, BODY CHANNEL |
| 35 | 27-31402 | GASKET, CARBURETOR FLANGE |
| 36 | 11-29250 | NUT, CARBURETOR MOUNTING STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 45068 | CHOKE SOLENOID (NOT AS SHOWN) |
| 2 | 30050 | TERMINAL,CHOKE SOLENOID LEAD |
| 3 | 13-26996 | LOCKWASHER, HARNESS LEAD TO CHOKE SOLENOID |
| 4 | 11-68219 | NUT, WIRE HARNESS LEAD TO CHOKE SOLENOID |
| 5 | 10-25299 | SCREW, CHOKE SOLENOID ATTACHING (3/4") |
| 6 | 13-8M0204647 | LOCKWASHER, CHOKE SOLENOID ATTACHING SCREW |
| 7 | 54-25231 | CLIP, CHOKE SOLENOID LEAD TO CRANKCASE |
| 8 | 10-69079 | SCREW, CHOKE SOLENOID LEAD CLIP ATTACHING |
| 9 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| 10 | 48315A4 | PLUNGER AND LINK ASSEMBLY, CHOKE SOLENOID |
| 11 | 12-30164 | WASHER, PLUNGER AND LINK |
| 12 | 18-26953 | COTTER PIN, LINK TO UPPER CHOKE LEVER |
| 13 | 90242A1 | KNOB, CHOKE ROD |
| 14 | 25-20116 | GROMMET, CHOKE ROD |
| 15 | 46303 | LINK, CHOKE KNOB TO CHOKE ROD |
| 16 | 10-69022 | SCREW, LINK TO CHOKE KNOB |
| 17 | 13-26996 | LOCKWASHER, LINK SCREW |
| 18 | 46302 | ROD, CHOKE |
| 19 | 17-25391 | RIVET, CHOKE SHUTTER TO CHOKE ROD |
| 20 | 47804 | SHUTTER, CHOKE - CARBURETOR |
| 21 | 16-30172 | STUD, CARBURETOR - CHOKE SHUTTER PIVOT |
| 22 | 12-30164 | WASHER, CHOKE SHUTTER CARBURETOR STUD |
| 23 | 11-20110 | NUT, CHOKE SHUTTER TO CARBURETOR STUD |
| 24 | 23-30438 | BUSHING, NYLON - UPPER CHOKE SHUTTER |
| 25 | 24-37678 | SPRING, TENSION - CHOKE ROD |
| 26 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR |
| 27 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 28 | 11-8M0207775 | NUT, CHOKE ROD SPRING TO CARBURETOR STUD |
| 29 | 1335-3016 | CARBURETOR ASSEMBLY, COMPLETE |
| 30 | 53649A2 | THROTTLE PICK-UP BRACKET ASSEMBLY |
| 31 | 10-29239 | SCREW, THROTTLE BRACKET MOUNTING |
| 32 | 46319 | CLUSTER, THROTTLE LEVER (UPPER CARBURETOR) |
| 33 | 1395-6027 | SCREW, CLUSTER TO THROTTLE LEVER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 11-8M0207775 | NUT, LOWER SHOCK PIN SCREW |
| 1 | 1440-3296A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 28403A3 | THUMB SCREW ASSEMBLY |
| 3 | 12-28404 | WASHER, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | SHIM, CLAMP BRACKET TILT TUBE (.010 - .020) |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-22053 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 13 | 32-28052 | SLEEVE, RUBBER - TILT LOCK PIN BUMPER |
| 14 | 10-68298 | BOLT, CLAMP BRACKET TO BOAT TRANSOM |
| 15 | 12-68410 | WASHER, CLAMP BRACKET BOLT |
| 16 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 17 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 18 | 30126A1 | TILT STOP ASSEMBLY |
| 19 | 10-30128 | SCREW, TILT STOP LEVER ANCHOR |
| 20 | 13-31030 | WASHER, WAVE - LEVER ANCHOR SCREW |
| 21 | 11-29250 | NUT, LEVER ANCHOR SCREW |
| 22 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY(LONG SHAFT) |
| 23 | 26-37448 | OIL SEAL, SWIVEL BRACKET |
| 24 | 22-69059 | FITTING, GREASE |
| 25 | 19-77633Q | LUBRICAP, SWIVEL BRACKET GREASE FITTING |
| 26 | 17-49840A1 | SWIVEL PIN AND STEERING ARM ASSEMBLY (1 3/16" O.D.) Comment: LONG SHAFT |
| 27 | 28203 | BUMPER, STEERING ARM |
| 28 | 10-30453 | BOLT, STEERING ARM TO UPPER MOUNT |
| 29 | 11-8M0204653 | NUT, STEERING ARM BOLT FASTENING |
| 30 | 12-37429 | WASHER, SWIVEL PIN - LOWER (TOP WASHER OPTIONAL) |
| 31 | 10-31830 | SCREW, RIDE-GUIDE ATTACHING |
| 32 | 11-8M0204726 | NUT, RIDE-GUIDE ATTACHING SCREW |
| 33 | 38-56267 | SERIAL PLATE |
| 34 | 10-25612 | SCREW, DRIVE - SERIAL PLATE TO SWIVEL BRACKET |
| 35 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING |
| 36 | 28205T | STRAP STOP, DRIVE SHAFT HOUSING TO SWIVEL BRACKET |
| 37 | 10-28200 | SCREW, STRAP STOP TO DRIVE SHAFT HOUSING |
| 38 | 11-25269 | NUT, STRAP STOP FASTENING SCREW |
| 39 | 73984T | YOKE, BOTTOM |
| 40 | 11-37424 | NUT, SWIVEL PIN RETAINING |
| 41 | 55-28414 | PIN, LOWER SHOCK MOUNTING LONG SHAFT |
| 42 | 24-29821 | SPRING, REVERSE LOCK TENSION |
| 43 | 87431 | REVERSE LOCK ASSEMBLY |
| 44 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 45 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 46 | 23-28199 | SPACER, UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 47 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 48 | 12-8M0204695 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 49 | 10-28450 | SCREW, NYLOK - UPPER AND LOWER SHOCK MOUNTING PIN |
| 50 | 12-8M0204648 | WASHER, UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 51 | 34762A1 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) |
| 52 | 23-28198 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) |
| 53 | 55-58780A7 | SHOCK ABSORBER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 92-86166Q1 | GLUE, ADHESIVE - SOUND BLANKET FASTENING |
| 1 | 2182-7927A8 | COWL FRONT COVER ASSEMBLY |
| 2 | 56849 | KNOB, COWL FRONT COVER FASTENING |
| 3 | 12-30771 | WASHER, COVER FASTENING KNOB (RUBBER) |
| 4 | 12-27129 | WASHER, COVER FASTENING KNOB (STEEL) |
| 5 | 24-30772 | SPRING, TENSION - COVER FASTENING KNOB |
| 6 | 17-29077 | ROLL PIN, TENSION SPRING TO KNOB |
| 7 | 38674 | BLANKET, SOUND ABSORBING - FRONT COVER |
| 8 | 31095 | STRIP, SOUND - LOWER SECTION |
| 9 | 35552 | SEAL, SOUND - UPPER SECTION |
| 10 | 2119-3248A3 | WRAP AROUND COWL ASSEMBLY |
| 11 | 46785A1 | HANDLE, COWL LATCH -EARLY STYLE |
| 12 | 17-21057 | PIN, HINGE - HANDLE TO COWL LATCH -EARLY STYLE |
| 13 | 53-21058 | "E" RING, HANDLE TO COWL LATCH HINGE PIN -EARLY STYLE |
| 14 | 46785A1 | SWIVEL, COWL LATCH -EARLY STYLE |
| 15 | 46785A1 | COWL LATCH ASSEMBLY (LATE STYLE) |
| 16 | 30413 | HOOK, COWL LATCH FASTENING |
| 17 | 31935 | BLANKET, SOUND ABSORBING - WRAP AROUND COWL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 39-45205A12 | RING, PISTON (.015) OVERSIZE |
| 1 | 418-3249A3 | CRANKSHAFT |
| 2 | 28-45554 | KEY, FLYWHEEL DRIVE |
| 3 | 533-2761A3 | MAIN BEARING ASSEMBLY (VALVE TYPE) |
| 4 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 5 | 10-45775 | SCREW, MAIN BEARING CLAMPING |
| 6 | 11-45774 | NUT, MAIN BEARING CLAMPING SCREW |
| 7 | 34-32203A1 | REED SET, MATCHED - MAIN BEARING |
| 8 | 34-64632 | REED STOP, MAIN BEARING REED VALVES |
| 9 | 10-77280 | SCREW, REED STOP MOUNTING |
| 10 | 11-29469 | NUT, REED STOP MOUNTING SCREW |
| 11 | 531-1884A3 | CENTER MAIN BEARING ASSEMBLY |
| 12 | 17-20032 | DOWEL PIN, CENTER MAIN BEARING |
| 13 | 29-714221 | BEARING, NEEDLE |
| 14 | 26113T | RACE, OUTER (PAIR) |
| 15 | 53-26933 | RING, SNAP - OUTER RACE CLAMPING |
| 16 | 10-22968 | SCREW, CENTER MAIN BEARING CLAMPING |
| 17 | 11-8M0207775 | NUT, MAIN BEARING CLAMPING SCREW |
| 18 | 17-31245 | ,DOWEL PIN (STEPPED) |
| 19 | 25-8M0214919 | "O" RING, DRIVE SHAFT SPLINE |
| 20 | 739-3284A2 | PISTON AND PISTON PIN ASSEMBLY |
| 21 | 40-45740 | LOCK RING, PISTON PIN |
| 22 | 39-45153A12 | RING, PISTON |
| 23 | 617-2768A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 24 | 10-54803 | SCREW, CAP TO CONNECTING ROD |
| 25 | 11-20061 | NUT, CONNECTING ROD SCREW |
| 26 | 29-47897 | BEARING, NEEDLE - CRANKPIN |
| 27 | 29-39656 | BEARING, NEEDLE - PISTON PIN |
| 28 | 12-45741 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1128-1890A1 | END CAP ASSEMBLY, UPPER |
| 2 | 26-41953 | OIL SEAL |
| 3 | 25-31305 | "O" RING |
| 4 | 30-62567T | BALL BEARING |
| 5 | 15-31283A1 | SHIM, UPPER END CAP TO CRANKCASE (.002-3-5-10) |
| 6 | 10-30225 | SCREW, UPPER END CAP MOUNTING |
| 7 | 834-2758A3 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 8 | 17-20032 | DOWEL PIN, CYLINDER BLOCK TO MAIN BEARING |
| 9 | 17-43044 | DOWEL PIN, CRANKCASE TO CYLINDER BLOCK |
| 10 | 22-328022 | PLUG, PIPE - WATER PRESSURE HOLE (CYLINDER BLOCK) |
| 11 | 16-64936 | STUD, CARBURETOR MOUNTING (1 1/4") |
| 12 | 16-64281 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (1 7/8") |
| 13 | 16-26134 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (4 1/16") |
| 14 | 16-26135 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (2 5/16") |
| 15 | 16-376531 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (2 11/16") |
| 16 | 10-21449 | SCREW, CRANKCASE TO CYLINDER BLOCK (2") |
| 17 | 10-33008 | SCREW, CRANKCASE AND STARTER MOTOR BRACKET TO CYLINDER BLOCK Comment: (3 1/2") |
| 18 | 12-26825 | WASHER, CRANKCASE AND STARTER MOTOR BRACKET SCREW |
| 19 | 53-78201 | BRACKET, GROUND STRAP TO CRANKCASE |
| 20 | 10-62568 | SCREW, GROUND STRAP TO BRACKET |
| 21 | 12-20583 | WASHER, GROUND STRAP AND CRANKCASE SCREW |
| 22 | 11-29250 | NUT, CRANKCASE TO CYLINDER BLOCK SCREW |
| 23 | 10-36351 | SCREW, MAIN BEARING LOCKING |
| 24 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 25 | 10-20359 | SCREW, CENTER MAIN BEARING LOCKING |
| 26 | 1126-1751A1 | END CAP ASSEMBLY, LOWER |
| 27 | 21-28481A1 | CHECK VALVE ASSEMBLY, END CAP |
| 28 | 26-29478 | OIL SEAL, LOWER |
| 29 | 26-41953 | OIL SEAL, UPPER |
| 30 | 25-20081 | "O" RING |
| 31 | 30-63742T | BALL BEARING |
| 32 | 15-20085A1 | SHIM, LOWER END CAP TO CRANKCASE (.002-3-5-10) |
| 33 | 10-30225 | SCREW, LOWER END CAP MOUNTING |
| 34 | 32-8M0108355 | TUBE, BALANCE - MAIN BEARING |
| 35 | 22-996642 | ELBOW, BALANCE TUBE TO MAIN BEARING |
| 36 | 54-20386 | CLAMP, BALANCE TUBE TO ELBOW |
| 37 | 27-37449 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 38 | 37447 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 39 | 27-37414 | GASLET, BAFFLE PLATE TO MAINFOLD COVER |
| 40 | 46298 | COVER, EXHAUST MANIFOLD |
| 41 | 10-38837 | SCREW, BAFFLE PLATE AND COVER MOUNTING |
| 42 | 33385A5 | SWITCH, MERCURY |
| 43 | 10-28708 | SCREW, MERCURY SWITCH TO MANIFOLD COVER |
| 44 | 54-648552 | CLIP, MERCURY SWITCH LEAD TO CRANKCASE |
| 45 | 10-41228 | SCREW, MERCURY SWITCH LEAD CLIP TO CRANKCASE |
| 46 | 8M0084613 | "D" WASHER, MERCURY SWITCH LEAD CLIP SCREW |
| 47 | 27-33015 | GASKET, CYLINDER BLOCK COVER |
| 48 | 1012-2445 | COVER, CYLINDER BLOCK |
| 49 | 10-56500 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/4") |
| 50 | 11-8M0207775 | NUT, COVER MOUNTING SCREW |
| 51 | 27-31304 | GASKET, TRANSFER PORT COVER |
| 52 | 31288 | COVER, TRANSFER PORT |
| 53 | 10-28635 | SCREW, TRANSFER PORT COVER TO CYLINDER BLOCK (5/8") |
| 54 | 12-22937 | WASHER, TRANSFER PORT COVER SCREW |
| 55 | 37440 | BRACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 56 | 10-35386 | SCREW, BRACKET TO CYLINDER BLOCK (1") |
| 57 | 22-62365A1 | CHECK VALVE ASSEMBLY, UPPER - BLEED HOSE |
| 58 | 21-28481A1 | CHECK VALVE ASSEMBLY |
| 59 | 32-9912688 | HOSE, CYLINDER BLEED (8 1/2") |
| 60 | 22-67902 | CONNECTOR, LOWER - BLEED HOSE |
| 61 | 54-20387 | CLAMP, BLEED HOSE TO CHECK VALVE AND CONNECTOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 45-46247 | SHAFT, DRIVE - DISTRIBUTOR |
| 2 | 46242A1 | DISTRIBUTOR PILOT ASSEMBLY |
| 3 | 24-27944 | SPRING, HORSESHOE - DISTRIBUTOR PILOT |
| 4 | 17-27962 | PIN, ANCHOR - HORSESHOE SPRING TO PILOT |
| 6 | 53-46250 | RING, SNAP - BALL BEARING RETAINING |
| 7 | 30-20066 | BEARING, BALL - DISTRIBUTOR PILOT |
| 8 | 10-455611 | SCREW, PILOT ASSEMBLY TO DISTRIBUTOR (1 1/8") |
| 9 | 48103A1 | ECONOMIZER COLLAR AND PIN ASSEMBLY |
| 10 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER |
| 11 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 12 | 33147A1 | THROTTLE ACTUATOR ASSEMBLY |
| 13 | 23-26602 | BUSHING, NYLON - THROTTLE ACTUATOR |
| 14 | 10-46420 | SCREW, THROTTLE ACTUATOR TO ECONOMIZER COLLAR (1 1/2") |
| 15 | 12-46246 | WASHER, PILOT TO DISTRIBUTOR ADAPTOR |
| 16 | 66856A1 | ADAPTOR, DISTRIBUTOR |
| 17 | 22-25094 | FITTING, GREASE - DISTRIBUTOR ADAPTOR |
| 18 | 10-78841 | SCREW, DISTRIBUTOR ADAPTOR AND PILOT TO CRANKCASE |
| 19 | 12-20084 | WASHER, DISTRIBUTOR ADAPTOR AND PILOT SCREW |
| 20 | 11-22053 | NUT, DISTRIBUTOR ADAPTOR AND PILOT SCREW |
| 21 | 12-27939 | WASHER, DISTRIBUTOR PILOT |
| 22 | 53-20067 | RING, SNAP - BALL BEARING RETAINING |
| 23 | 30-20066 | BEARING, BALL - DISTRIBUTOR PILOT |
| 24 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 25 | 13-27959 | WASHER, WAVE - DISTRIBUTOR BALL BEARING TENSION |
| 26 | 27955 | CAP, DISTRIBUTOR ADAPTOR AND PILOT FASTENING |
| 27 | 23-29909 | SPACER, DRIVE PULLEY |
| 28 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 29 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 30 | 29907 | FLANGE, DRIVEN PULLEY |
| 31 | 28-29910 | KEY, DISTRIBUTOR DRIVING |
| 32 | 13-26996 | LOCKWASHER, PULLEY CLAMPING SCREW |
| 33 | 10-41506 | SCREW, PULLEY CLAMPING |
| 34 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 393-2799A20 | DISTRIBUTOR ASSEMBLY, COMPLETE Comment: SERIAL 02215201-09999999 |
| -- | 8M0084600 | CONNECTOR, SPARK PLUG LEAD |
| 1 | 393-2799A21 | HOUSING, PRIMARY |
| 2 | 13-26917 | WASHER, WAVE - PRIMARY HOUSING |
| 3 | 393-2795 | SHIM, TRIGGER HOUSING TO PRIMARY HOUSING |
| 4 | 393-2918A6 | TRIGGER HOUSING ASSEMBLY |
| 5 | 53-45906 | RING, RETAINER - ROTOR SHAFT BALL BEARING |
| 6 | 30-26379 | BEARING, BALL - ROTO SHAFT |
| 7 | 393-2921A5 | ROTOR SHAFT ASSEMBLY Comment: SERIAL 02215201-09999999 |
| 8 | 17-20032 | DOWEL PIN, ADAPTOR TO PRIMARY HOUSING |
| 9 | 393-3014A2 | ADAPTOR ASSEMBLY, HOUSING TO DISTRIBUTOR CAP |
| 10 | 27-45910 | GASKET, ADAPTOR TO PRIMARY HOUSING SEE NOTE BELOW |
| 11 | 10-32627 | SCREW, ADAPTOR TO HOUSING |
| 12 | 11-46438 | NUT, ADAPTOR TO HOUSING SCREW |
| 13 | 10-38055 | SCREW, SHIM AND TRIGGER HOUSING TO PRIMARY HOUSING |
| 14 | 85-623594 | SLEEVE, TRIGGER HOUSING CABLES |
| 15 | 22-31521A1 | ELBOW ASSEMBLY, VENT HOSE - ADAPTOR HOUSING |
| 16 | 27-36268 | GASKET, DISTRIBUTOR CAP TO ADAPTOR |
| 17 | 393-2955A2 | DISTRIBUTOR CAP ASSEMBLY |
| 18 | 22-31521 | ELBOW, VENT HOSE - DISTRIBUTOR CAP |
| 19 | 393-1293A1 | BRUSH AND SPRING ASSEMBLY |
| 20 | 10-60464 | SCREW, DISTRIBUTOR CAP TO ADAPTOR TO HOUSING (2") |
| 21 | 12-89302 | WASHER, DISTRIBUTOR CAP FASTENING SCREW |
| 22 | 11-46438 | NUT, DISTRIBUTOR CAP FASTENING SCREW |
| 23 | 393-3018A1 | HIGH TENSION CABLE ASSEMBLY, DISTRIBUTOR TO COIL |
| 24 | 332-2854T01 | BOOT, HIGH TENSION CABLE TO COIL |
| 25 | 85-94589 | SLEEVE, SPARK PLUG LEAD TO DISTRIBUTOR |
| 27 | 32-46398 | SLEEVE, HIGH TENSION CABLE |
| 28 | 84-813715A1 | SPARK PLUG LEAD ASSEMBLY (#1, #2 AND #4) Comment: ORDER A-36549A1 KIT FOR REPLACEMENT OF LEAD WIRE MARKERS |
| 29 | 85-63709A1 | PROTECTOR, SPARK PLUG LEAD |
| 30 | 32-46768 | SLEEVE (LEADS 1, 2, 3, 4) - 6" |
| 31 | 32-46768 | SLEEVE, HIGH TENSION LEAD (LEADS 1, 2, 3, 4) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1551-3918A3 | DRIVE SHAFT HOUSING ASSEMBLY(LONG SHAFT) |
| 2 | 16-56295 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING |
| 3 | 19-32298 | PLUG, PLASTIC - TRIM TAB SCREW HOLE |
| 4 | 47558A2 | ROD, PUSH - REVERSE LOCK(LONG SHAFT) |
| 5 | 11-60049 | NUT, JAM - PUSH ROD |
| 6 | 39022 | YOKE, PUSH ROD |
| 7 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK |
| 8 | 18-25191 | COTTER PIN, PUSH ROD PIN |
| 9 | 37417 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 10 | 10-37571 | SCREW, TRIM COVER TO BOTTOM COWL |
| 11 | 37919 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 12 | 37665 | STRIP, RETAINING - TRIM COVER SEAL (SIDE) |
| 13 | 38052 | STRIP, RETAINING - TRIM COVER SEAL (REAR) |
| 14 | 10-38055 | SCREW, RETAINING STRIP TO DRIVE SHAFT HOUSING (5/8") |
| 15 | 10-37571 | SCREW, RETAINING STRIP TO DRIVE SHAFT HOUSING (1/2") |
| 16 | 12-30164 | WASHER, RETAINING STRIP SCREW |
| 17 | 32-37438 | TUBE, WATER INLET(LONG SHAFT) |
| 18 | 23-29591 | SLEEVE, RUBBER - WATER INLET TUBE |
| 19 | 38470 | TUBE, EXHAUST (LONG SHAFT) |
| 20 | 10-38601 | SCREW, EXHAUST TUBE TO EXHAUST EXTENSION PLATE |
| 21 | 11-35888 | NUT, EXHAUST TUBE SCREW |
| 22 | 11-23161 | NUT, POWERHEAD STUDS |
| 23 | 11-8M0204726 | NUT, POWERHEAD STUDS |
| 24 | 12-20086 | WASHER, POWERHEAD STUDS |
| 25 | 27-38471 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 26 | 37396 | MOUNT, RUBBER - UPPER |
| 27 | 26218 | COVER, UPPER MOUNT - OUTSIDE HALF |
| 28 | 26217 | COVER, UPPER MOUNT - INSIDE HALF |
| 29 | 24929 | PACKING, "U" CUP |
| 30 | 10-20012 | SCREW, UPPER MOUNT COVER (1 5/8") |
| 31 | 10-28775 | SCREW, UPPER MOUNT COVER (2 1/8") |
| 32 | 12-8M0204649 | WASHER, UPPER MOUNT COVER SCREW |
| 33 | 11-35888 | NUT, UPPER MOUNT COVER SCREW |
| 34 | 12-30515 | WASHER, UPPER MOUNT BOLT |
| 35 | 12-30516 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 36 | 12-30514 | WASHER, UPPER MOUNT BOLT |
| 37 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 38 | 37397 | MOUNT, RUBBER - LOWER |
| 39 | 10-75284 | SCREW, UPPER MOUNT (5 1/2") |
| 40 | 11-25096 | NUT, MOUNT SCREW |
| 41 | 25067 | BUMPER, RUBBER - MOUNTING SCREW |
| 42 | 11-8M0204653 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 43 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 44 | 11-29489 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 45 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 46 | 35608 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 47 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 48 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING |
| 49 | 35474T | COVER, LOWER MOUNT CLAMP |
| 50 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 51 | 10-29722 | SCREW, COVER TO LOWER CLAMP MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 2 | 11-8M0214915 | NUT, FLYWHEEL |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 28-45554 | KEY, FLYWHEEL DRIVE |
| 5 | 225-2498A9 | FLYWHEEL ASSEMBLY, COMPLETE |
| 6 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL |
| 7 | 10-32417 | SCREW, PLATE AND HUB TO FLEXIBLE PLATE |
| 8 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 9 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 10 | 30306 | PULLEY, FLYWHEEL |
| 11 | 29787 | HUB, FLYWHEEL PULLEY |
| 12 | 398-2997 | STATOR, ALTERNATOR |
| 13 | 30050 | TERMINAL, STATOR LEAD WIRE |
| 14 | 10-57021 | SCREW, STATOR TO UPPER END CAP |
| 15 | 54-22740 | CLIP, STATOR LEAD TO UPPER END CAP |
| 16 | 10-41228 | SCREW, STATOR LEAD CLIP FASTENING (1/2") |
| 17 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| 18 | 54-46409 | CLIP, STATOR LEAD CLIP TO TOP MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 30269A2 | FUEL PUMP ASSEMBLY - UPPER |
| 2 | 21-30430A1 | CHECK VALVE ASSEMBLY |
| 3 | 23014A1 | DIAPHRAGM KIG |
| 7 | 23004 | RETAINER, CHECK VALVE |
| 8 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 9 | 30461A2 | FUEL PUMP ASSEMBLY - LOWER |
| 10 | 30275 | COVER, FUEL PUMP |
| 11 | 10-29878 | SCREW, PUMP MOUNTING (1 1/2") - UPPER PUMP |
| 12 | 10-30274 | SCREW, PUMP MOUNTING (1 3/4") - UPPER PUMP |
| 13 | 10-73013 | SCREW, PUMP MOUNTING (1 1/2") - LOWER PUMP |
| 14 | 10-30273 | SCREW, PUMP MOUNTING (1 7/8") - LOWER PUMP |
| 15 | 32-33154A1 | FUEL LINE ASSY, PUMP TO CARBURETOR (13 1/2") |
| 16 | 22-8M0123050 | ELBOW (45), UPPER CARBURETOR |
| 17 | 22-30174 | ELBOW, UPPER FUEL PUMP OUTLET |
| 18 | 22-30175 | SLEEVE, FUEL PUMP OUTLET ELBOW |
| 19 | 22-30177 | NUT, FUEL PUMP OUTLET ELBOW |
| 20 | 32-31552A1 | FUEL LINE ASSY, PUMP TO PUMP (12 3/8") |
| 21 | 32-31553A1 | FUEL LINE ASSY, PUMP TO CARBURETOR (19 3/4") |
| 22 | 32-30176 | FUEL LINE, ADAPTOR TO LOWER FUEL PUMP INLET |
| 23 | 22-30174 | ELBOW, LOWER FUEL PUMP INLET |
| 24 | 22-30175 | SLEEVE, FUEL PUMP INLET ELBOW |
| 25 | 22-30177 | NUT, FUEL PUMP INLET ELBOW |
| 26 | 22-37682 | ELBOW, FUEL LINE TO ADAPTOR |
| 27 | 30186 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 28 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 29 | 25-16524 | "O" RING, ADAPTOR STEM |
| 30 | 24-30189 | SPRING, ADAPTOR STEM |
| 31 | 30188 | CUP WASHER, ADAPTOR |
| 32 | 10-37561 | SCREW, ADAPTOR TO BOTTOM COWL (2") |
| 33 | 11-8M0207775 | NUT, ADAPTOR FASTENING SCREW |
| 34 | 32-31550A1 | FUEL LINE ASSY, UPPER TO LOWER CARBURETOR (6") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1623-3912A9 | GEAR HOUSING ASSEMBLY, COMPLETE(LONG SHAFT) SEE NOTE BELOW |
| 1 | 1623-5244A14 | GEAR HOUSING ASSEMBLY |
| 2 | 16-57921 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (4") |
| 3 | 16-8M0133358 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 1/16") |
| 4 | 16-8M0034463 | STUD, WATER PUMP BASE AND BODY TO GEAR HOUSING (3 3/8") |
| 5 | 16-57919 | STUD, WATER PUMP BASE AND BODY TO GEAR HOUSING (3 5/16") |
| 6 | 31-32898T | BEARING, ROLLER - DRIVE SHAFT |
| 7 | 45-38460 | DRIVE SHAFT(LONG SHAFT) |
| 8 | 43-31419 | GEAR, PINION - DRIVE SHAFT |
| 9 | 11-30932 | NUT, PINION GEAR TO DRIVE SHAFT |
| 10 | 15-30278A1 | SHIM, WATER PUMP BASE TO GEAR HOUSING (.002-3-5-10) |
| 11 | 30-63326T | BEARING, BALL - DRIVE SHAFT |
| 12 | 53-30726 | RING, RETAINING - BALL BEARING |
| 13 | 27-32438 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 14 | 25-8M0204651 | "O" RING, WATER PUMP BASE |
| 15 | 46-48758A1 | WATER PUMP BASE ASSEMBLY |
| 16 | 26-94038 | OIL SEAL, WATER PUMP BASE |
| 17 | 26-16977 | OIL SEAL, WATER PUMP BASE |
| 18 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 19 | 27-8M0090319 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 20 | 8M0204677 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 21 | 27-858524 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 22 | 46-96148A8 | WATER PUMP BODY ASSEMBLY |
| 23 | 30915 | INSERT, WATER PUMP BODY |
| 24 | 26-16977 | OIL SEAL, WATER PUMP BODY |
| 26 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 27 | 47-89984T4 | IMPELLER, WATER PUMP |
| 28 | 17-8M0214994 | ,PIN, IMPELLER DRIVE |
| 29 | 10-30720 | SCREW, WATER PUMP BODY TO GEAR HOUSING (1/4") |
| 30 | 13-26992 | LOCKWASHER, WATER PUMP BODY FASTENING SCREW AND STUDS (1/4" |
| 31 | 11-29598 | NUT, WATER PUMP BODY FASTENING STUDS (1/4") |
| 32 | 13-8M0204647 | LOCKWASHER, WATER PUMP BODY FASTENING STUD (5/16") |
| 33 | 11-28770 | NUT, WATER PUMP BODY FASTENING STUD (5/16") |
| 34 | 25-8M0214918 | RING, RUBBER - CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 35 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 36 | 25-8M0214919 | "O" RING, UPPER - DRIVE SHAFT |
| 37 | 37641001 | SEAL, EXHAUST TUBE |
| 38 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 39 | 76062A1 | SHAFT, SHIFT - LOWER |
| 40 | 53-29641 | CLIP, RETAINING - SHIFT SHAFT |
| 41 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 42 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 43 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 44 | 12-31266 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 45 | 78036 | SPACER, LOWER - REVERSE LOCKING |
| 46 | 43308T1 | CAM, REVERSE LOCKING |
| 47 | 52887 | GUIDE, PUSH ROD - REVERSE LOCKING |
| 48 | 22-390721 | PLUG, PIPE - SHIFT SHAFT GREASE FILLER HOLE |
| 49 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 50 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 51 | 10-29608 | SCREW, GEAR HOUSING FLUSHING HOLE |
| 52 | 27-8M0214916 | GASKET, GEAR HOUSING FLUSHING HOLE SCREW |
| 53 | 26-8M0214917 | SEAL, GEAR HOUSING FLUSHING HOLE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1623-3912A9 | GEAR HOUSING ASSEMBLY, COMPLETE(LONG SHAFT) SEE NOTE BELOW |
| 1 | 1623-5244A14 | GEAR HOUSING ASSEMBLY (SEE PAGE 31 FOR BREAKDOWN) |
| 54 | 760394 | CAM, SHIFT |
| 55 | 30625 | FOLLOWER, CAM |
| 56 | 30624 | SLIDE, CROSS PIN |
| 57 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 58 | 15-30923A1 | SHIM, BEARING OUTER RACE TO GEAR HOUSING (.002-3-5-10) |
| 59 | 43-53100A3 | FORWARD GEAR ASSEMBLY |
| 60 | 31-30895T | BEARING, ROLLER - FORWARD GEAR |
| 61 | 43-31887 | REVERSE GEAR ASSEMBLY |
| 62 | 31-31092 | CUP, TAPERED ROLLER BEARING |
| 63 | 52-822539T | RATCHET, SLIDING CLUTCH |
| 64 | 17-8M0100263 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 65 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 66 | 44-47900A2 | SHAFT, PROPELLER |
| 68 | 30-31265 | BEARING, BALL - REVERSE GEAR |
| 69 | 12-71143A1 | WASHER, THRUST - BEARING CARRIER TO GEAR HOUSING |
| 70 | 15-29955A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) |
| 71 | 25-29976 | "O" RING, BEARING CARRIER |
| 72 | 31284T1 | BEARING CARRIER ASSEMBLY |
| 73 | 31-30956T | BEARING, ROLLER - BEARING CARRIER |
| 74 | 26-8M0204670 | OIL SEAL, BEARING CARRIER |
| 75 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 76 | 12-29957 | WASHER, GEAR HOUSING COVER |
| 77 | 52699 | COVER, GEAR HOUSING |
| 78 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 79 | 10-32470 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 80 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 81 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 82 | 12-31013 | WASHER, THRUST - BEARING CARRIER |
| 83 | 30581A1 | THRUST HUB AND WASHER ASSEMBLY |
| 84 | 12-29590 | WASHER, CUPPER - THRUST HUB |
| 85 | 12-31211Q03 | WASHER, SPLINED - PROPELLER NUT |
| 86 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 87 | 11-29594 | NUT, PROPELLER |
| 88 | 10-34353 | SCREW, GEAR HOUSING TO DRIVE SHAFT HOUSING (1") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 45-33007 | SHAFT, DRIVE - MAGNETO |
| 2 | 39561A1 | MAGNETO PILOT ASSEMBLY |
| 3 | 24-27944 | SPRING, HORSESHOE - MAGNETO PILOT |
| 4 | 17-27962 | PIN, ANCHOR - HORSESHOE SPRING TO PILOT |
| 5 | 33020 | STOP, SPARK ADVANCE - MAGNETO PILOT |
| 7 | 30-20066 | BEARING, BALL - MAGNETO PILOT |
| 8 | 10-30110 | SCREW, PILOT ASSEMBLY TO MAGNETO (5/8") |
| 9 | 48103A1 | ECONOMIZER COLLAR AND PIN ASSEMBLY |
| 10 | 17-27961 | PIN, ECONOMZIER COLLAR - SPRING RETAINER |
| 11 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 12 | 33147A1 | THROTTLE ACTUATOR ASSEMBLY |
| 13 | 23-26602 | BUSHING, NYLON - THROTTLE ACTUATOR |
| 14 | 10-46420 | SCREW, THROTTLE ACTUATOR TO ECONOMIZER COLLAR (1/2") |
| 16 | 30408 | ADAPTOR, MAGNETO |
| 17 | 22-25094 | FITTING, GREASE - MAGNETO ADAPTOR |
| 18 | 10-78841 | SCREW, MAGNETO ADAPTOR AND PILOT TO CRANKCASE |
| 19 | 12-20084 | WASHER, MAGNETO ADAPTOR AND PILOT SCREW |
| 20 | 11-22053 | NUT, MAGNETO ADAPTOR AND PILOT SCREW |
| 21 | 12-27939 | WASHER, MAGNETO PILOT |
| 24 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 25 | 13-27959 | WASHER, WAVE - MAGNETO BALL BEARING TENSION |
| 26 | 27955 | CAP, MAGNETO ADAPTOR AND PILOT FASTENING |
| 27 | 23-29909 | SPACER, DRIVE PULLEY |
| 28 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 29 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 30 | 29907 | FLANGE, DRIVEN PULLEY |
| 31 | 28-29910 | KEY, MAGNETO DRIVING |
| 32 | 13-26996 | LOCKWASHER, PULLEY CLAMPING SCREW |
| 33 | 10-41506 | SCREW, PULLEY CLAMPING |
| 34 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 46251 | PLATE, THROTTLE STOP |
| 2 | 10-69035 | SCREW, THROTTLE STOP PLATE TO ADAPTOR (5/8") |
| 3 | 37747 | GROUND STRAP, STOP BRACKET TO FRONT SUPPORT BRACKET |
| 4 | 10-21504 | SCREW, ADJUSTING - THROTTLE STOP (1 1/4") |
| 5 | 25-46252 | GROMMET, THROTTLE STOP ADJUSTING SCREW (NOT AS SHOWN) |
| 6 | 26852 | CAP, NYLON - ADJUSTING SCREW |
| 7 | 394-2271A2 | MAGNETO ASSEMBLY, COMPLETE (SEE PAGE 10 FOR BREAKDOWN) |
| 8 | 54-25231 | CLIP, MERCURY SWITCH AND HARNESS LEADS TO MAGNETO |
| 9 | 10-20401 | SCREW, LEAD CLIP TO MAGNETO |
| 10 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| 11 | 394-1134A1 | GROUND STRAP ASSEMBLY, MAGNETO TO CRANKCASE |
| 12 | 25-25429 | "O" RING, HIGH TENSION LEAD CABLE TO END CAP COVER |
| 13 | 32-46768 | SLEEVE, SPARK PLUG LEAD (3") |
| 14 | 84-821945A46 | CABLE ASSEMBLY, HIGH TENSION LEAD - SPARK PLUG (33") |
| 15 | 85-63709A1 | PROTECTOR, SPARK PLUG |
| 16 | 33-8M0114739 | SPARK PLUG (CHAMPION - L4J) |
| 17 | 54-28700 | CLIP, HIGH TENSION LEAD CABLE FASTENING |
| 18 | 10-37646 | SCREW, HIGH TENSION CLIP TO CRANKCASE (1/2") |
| 19 | 13-21272 | LOCKWASHER, HIGH TENSION CLIP SCREW |
| 20 | 393-2799A20 | DISTRIBUTOR ASSEMBLY, COMPLETE Comment: SERIAL 02215201-09999999 |
| 21 | 30109 | GROUND STRAP ASSEMBLY, DISTRIBUTOR TO CRANKCASE |
| 22 | 33-896329827 | SPARK PLUG (CHAMPION - L19V) |
| 23 | 63319 | RETAINER, HIGH TENSION LEADS |
| 24 | 10-46378 | SCREW, HIGH TENSION LEAD RETAINER (1") |
| 25 | 11-20013 | NUT, HIGH TENSION LEAD RETAINER SCREW |
| 26 | 32-8M0108355 | HOSE, VENT - DISTRIBUTOR TO ELBOW (8 3/4") |
| 27 | 32-8M0108355 | HOSE, VENT - DISTRIBUTOR TO ELBOW (13") |
| 28 | 22-31521 | ELBOW, VENT HOSE TO BOTTOM COWL |
| 29 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR |
| 30 | 25996A1 | SWIVEL AND LINK ROD ASSEMBLY |
| 31 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING |
| 32 | 37588 | ROD, LINK - UPPER |
| 33 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 34 | 48562 | LEVER, THROTTLE CONTROL (NOT AS SHOWN) |
| 35 | 12-8M0204649 | WASHER, THROTTLE CONTROL LEVER SWIVEL |
| 36 | 13-25806 | WASHER, WAVE - THROTTLE CONTROL LEVER SWIVEL |
| 37 | 11-8267089 | NUT, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 38 | 10-31830 | SCREW, THROTTLE LEVER TO EXHAUST COVER (1 3/4") |
| 39 | 12-8M0042641 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 41 | 11-8M0204726 | NUT, THROTTLE CONTROL LEVER SCREW |
| 42 | 37587 | SWIVEL, LOWER - THROTTLE CONTROL LEVER TO THROTTLE CABLE |
| 43 | 11-8267089 | NUT, THROTTLE CABLE TO LOWER SWIVEL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 394-2271A2 | MAGNETO ASSEMBLY, COMPLETE |
| 1 | 394-1570 | FRAME, MAGNETO HOUSING |
| 2 | 10-25510 | SCREW, SET - COIL BRIDGE |
| 3 | 394-1051 | LOCKWIRE, COIL BRIDGE SET SCREW |
| 4 | 30-24998 | BEARING, BALL (DRIVE END) |
| 5 | 394-1067A1 | MAGNETIC ROTOR AND SHAFT |
| 6 | 30-49090 | BEARING, BALL (OPPOSITE DRIVE END) |
| 7 | 394-1637 | SUPPORT, BALL BEARING |
| 8 | 10-25509 | SCREW AND LOCKWASHER, SUPPORT TO FRAME |
| 9 | 84-60466A13 | WIRE ASSEMBLY, PRIMARY GROUND LEAD |
| 10 | 10,10-29182 | SCREW, PRIMARY GROUND |
| 11 | 12-30267 | WASHER, PRIMARY GROUND TERMINAL |
| 12 | 394-1579 | INSULATOR, PRIMARY GROUND TERMINAL |
| 13 | 12-29099 | WASHER, INSULATING - PRIMARY GROUND SCREW |
| 14 | 11-20101 | BUSHING, INSULATING - HOUSING FRAME |
| 15 | 12-26014 | WASHER, PRIMARY GROUND SCREW |
| 16 | 11-24656 | NUT, LOCK - PRIMARY GROUND SCREW |
| 17 | 11-68219 | NUT, PRIMARY GROUND SCREW |
| 18 | 394-1128A1 | COIL ASSEMBLY |
| 19 | 394-1050 | CLIP, COIL - HIGH TENSION |
| 20 | 13-23836 | LOCKWASHER, COIL TERMINAL |
| 21 | 394-1131 | NUT, COIL CLIP FASTENING |
| 22 | 393-1504A11 | BREAKER ASSEMBLY |
| 23 | 393-1586 | GROMMET, PLASTIC - BREAKER BRACKET |
| 24 | 16-29230 | STUD, PRIMARY LEAD AND TENSION SPRING |
| 25 | 11-29236 | NUT, PRIMARY LEAD FASTENING |
| 26 | 394-1106A1 | HOLDER AND CAM WICK ASSEMBLY |
| 27 | 53-21058 | "E" RING, BREAKER TO PIVOT PIN |
| 28 | 10-20597 | SCREW, BREAKER HOLDER TO HOUSING |
| 29 | 394-1130A1 | CONDENSER |
| 30 | 10-25509 | SCREW AND LOCKWASHER, CONDENSER FASTENING |
| 31 | 27-29166 | GASKET, MAGNETO COVER |
| 32 | 394-1577A2 | COVER, MAGNETO |
| 33 | 10-29418 | SCREW, COVER TO FRAME |
| 34 | 14-29157 | TAB WASHER, COVER FASTENING SCREW |
| 35 | 394-2602A1 | MAGNETO ROTOR ASSEMBLY |
| 36 | 394-1110 | CLIP, SPRING |
| 37 | 27-25725 | GASKET, END CAP COVER |
| 38 | 394-1561A2 | END CAP COVER ASSEMBLY |
| 39 | 394-1056A1 | BRUSH AND SPRING ASSEMBLY |
| 40 | 10-25517 | SCREW, HIGH TENSION CABLE FASTENING |
| 41 | 10-29418 | SCREW, END CAP COVER TO MAGNETO COVER |
| 42 | 14-29157 | TAB WASHER, COVER FASTENING SCREW |
| 43 | 22-996642 | ELBOW, PLASTIC - MAGNETO COVER VENT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92-326411 | GEAR LUBRICANT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-2986A27 | SWITCH BOX ASSEMBLY, COMPLETE |
| 2 | 12-45075 | WASHER, SWITCH BOX TERMINAL |
| 3 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 4 | 10-22485 | SCREW, SWITCH BOX TO FRONT SUPPORT BRACKET (3/4") |
| 5 | 11-8M0207775 | NUT, SWITCH BOX TO FRONT SUPPORT BRACKET SCREW |
| 6 | 78614A1 | RECTIFIER ASSEMBLY, COMPLETE |
| 7 | 12-45075 | WASHER, RECTIFIER TERMINAL |
| 8 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 9 | 46286 | JUMPER WIRE, RECTIFIER TO SWITCH BOX (RED - 9") Comment: SERIAL 00000000-02208376 |
| 10 | 10-22485 | SCREW, RECTIFIER TO FRONT SUPPORT BRACKET (3/4") |
| 11 | 11-8M0207775 | NUT, RECTIFIER TO FRONT SUPPORT BRACKET SCREW |
| 12 | 59757 | BRACKET, RETAINER - HIGH TENSION LEAD |
| 13 | 10-21722 | SCREW, RETAINER BRACKET TO FRONT SUPPORT BRACKET (5/8") |
| 14 | 11-8M0207775 | NUT, RETAINER BRACKET SCREW |
| 15 | 50-45822A1 | STARTER MOTOR ASSEMBLY |
| 16 | 13-26992 | LOCKWASHER, STARTER MOTOR TERIMINAL |
| 17 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 18 | 10-22698 | SCREW, STARTER MOTOR TO CRANKCASE FLANGE |
| 19 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR SCREW |
| 20 | 37331 | PLATE, SPACER - STARTER MOTOR TO BRACKET |
| 21 | 38747 | BRACKET, SUPPORT - STARTER MOTOR |
| 22 | 13-24669 | LOCKWASHER, THRU BOLT - BRACKET TO STARTER MOTOR |
| 23 | 11-20088 | NUT< THRU BOLT - BRACKET TO STARTER MOTOR |
| 24 | 84-93389A12 | WIRE, STARTER MOTOR TO STARTER SOLENOID AND TOP MOUNT |
| 25 | 10-69035 | SCREW, GROUND WIRE TO STARTER MOTOR |
| 26 | 13-26992 | LOCKWASHER, GROUND WIRE FASTENING SCREW |
| 27 | 46715 | GROUND STRAP ASSEMBLY |
| 28 | 32445A1 | STARTER SOLENOID |
| 29 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 30 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 31 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 32 | 11-22053 | NUT, SOLENOID TERMINAL - INSIDE (5/16") |
| 33 | 10-29238 | SCREW, STARTER SOLENOID TO STARTER MOTOR |
| 34 | 46985 | WIRING HARNESS (INTERNAL) Comment: SERIAL 02208377-09999999 |
| 35 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 36 | 26079A2 | PLATE, BACKING - WIRING HARNESS |
| 37 | 10-45893 | SCREW, BACKING PLATE TO BOTTOM COWL |
| 38 | 10-98256 | SCREW, WIRING HARNESS LEAD TO BOTTOM COWL (1/2") |
| 39 | 13-25244 | LOCKWASHER, WIRING HARNESS LEAD SCREW |
| 40 | 54-26550 | CLIP, WIRING HARNESS LEAD |
| 41 | 10-29072 | SCREW, WIRING HARNESS LEAD CLIP ATTACHING (5/8") |
| 42 | 8M0084613 | "D" WASHER, WIRING HARNESS LEAD CLIP ATTACHING SCREW |
| 43 | 11-24656 | NUT, WIRING HARNESS LEAD CLIP ATTACHING SCREW |
| 44 | 332-4895A5 | IGNITION COIL ASSEMBLY, COMPLETE |
| 45 | 10-46367 | SCREW, IGNITION COIL CLAMPING - CLIP ATTACHING (2 1/2") |
| 46 | 11-68219 | NUT< IGNITION COIL CLAMPING SCREW |
| 47 | 12-8M0204666 | WASHER< IGNITION COIL CLAMPING SCREW |
| 48 | 54-22740 | CLIP, LEAD WIRE TO IGNITION COIL |
| 49 | 8M0084613 | "D" WASHER, IGNITION COIL CLAMPING SCREW |
| 50 | 11-8267086 | NUT< IGNITION COIL CLAMPING SCREW |
| 51 | 10-69026 | SCREW, IGNITION COIL TO BOTTOM COWL (7/8") |
| 52 | 13-26992 | LOCKWASHER, IGNITION COIL SCREW |
| 53 | 10-37561 | SCREW, IGNITION COIL TO BOTTOM COWL (2 1/2") |
| 54 | 11-8M0207775 | NUT, IGNITION COIL SCREW |
| 55 | 10-45218 | SCREW, IGNITION COIL WIRE TO SWITCH BOX (3/8") |
| 56 | 30212 | TERMINAL BLOCK |
| 57 | 10-33152 | SCREW, TERMINAL BLOCK ATTACHING |
| 58 | 10-62568 | SCREW, HARNESS LEADS TO TERMINAL BLOCK |
| 59 | 54-22783 | "S" CLIP, WIRING HARNESS TO BOTTOM COWL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 12-69057 | WASHER, RUBBER MOUNT STUD |
| 1 | 37408 | HANDLE, CHROME - TOP COWL |
| 2 | 12-20533 | WASHER, CHROME HANDLE TO INSIDE HANDLE STUD |
| 3 | 12-69056 | WASHER, CHROME HANDLE TO INSIDE HANDLE STUD (FRONT) |
| 4 | 11-8267089 | NUT, CHROME HANDLE TO INSIDE HANDLE STUD |
| 5 | 35496 | PAD, BUMPER - TOP COWL HANDLE |
| 6 | 37434 | HANDLE, INSIDE - TOP COWL |
| 7 | 10-35386 | SCREW, HANDLE TO TOP COWL (1") |
| 8 | 13-8M0204647 | LOCKWASHER, HANDLE TO TOP COWL SCREW |
| 9 | 2114-3806A1 | COWL, TOP |
| 10 | 37410A1 | TRIM MOULDING ASSEMBLY, TOP COWL |
| 11 | 10-29227 | SCREW, BRASS - MOULDING TO TOP COWL |
| 12 | 10-29226 | SCREW, DECORATIVE - MOULDING TO TOP COWL |
| 13 | 13-26995 | LOCKWASHER, MOULDING FASTENING SCREW |
| 14 | 11-26419 | NUT, MOULDING FASTENING SCREW |
| 15 | 76370 | SHIELD, TOP COWL - REAR |
| 16 | 10-37370 | SCREW, SHIELD TO TOP COWL (5/8") |
| 17 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 18 | 47341A11 | ROPE, STARTER (FOR MANUAL STARTING ONLY) |
| 19 | 37411 | BRACKET, COWL LATCH - TOP COWL FASTENING |
| 20 | 1558-3756 | SCREW, COWL LATCH BRACKET TO TOP COWL |
| 21 | 11-37556 | NUT, COWL LATCH BRACKET SCREW |
| 22 | 79897A4 | FRAME, TOP COWL SUPPORT |
| 23 | 37-45201 | DECAL, TIMING - TOP COWL FRAME |
| 24 | 90435 | MOUNT, RUBBER - TOP COWL FRAME |
| 25 | 11-8267089 | NUT, RUBBER MOUNT TO TOP COWL FRAME |
| 26 | 46170 | BRACKET, TOP COWL SUPPORT - REAR |
| 27 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 28 | 13-26992 | LOCKWASHER, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 29 | 11-20088 | NUT, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 30 | 10-26065 | SCREW, REAR SUPPORT BRACKET TO TOP COWL FRAME (1") |
| 31 | 11-29250 | NUT, REAR SUPPORT BRACKET SCREW |
| 32 | 10-74824 | SCREW, REAR SUPPORT BRACKET TO BOTTOM COWL (1 1/4") |
| 33 | 13-8M0204647 | LOCKWASHER, REAR SUPPORT BRACKET SCREW |
| 34 | 37412 | LEVER, CLAMPING - TOP COWL MOUNTING |
| 35 | 23-26819 | BUSHING, NYLON - CLAMPING LEVER |
| 36 | 12-38006 | WASHER, CLAMPING LEVER |
| 37 | 23-31293 | BUSHING, RUBBER - CLAMPING LEVER |
| 38 | 11-30428 | FASTENER, CLAMPING LEVER |
| 39 | 17-29077 | PIN, ROLL - CLAMPING LEVER |
| 40 | 46240A3 | BRACKET ASSEMBLY, TOP COWL SUPPORT - FRONT |
| 41 | 37903 | FLANGE, RUBBER - FRONT TOP COWL SUPPORT BRACKET |
| 42 | 32-8M0108355 | HOSE, FRONT SUPPORT BRACKET TO BOTTOM COWL |
| 43 | 10-78841 | SCREW, FRONT SUPPORT BRACKET TO BOTTON COWL (1 1/2") |
| 44 | 11-29250 | NUT, FRONT SUPPORT BRACKET SCREW |
| 45 | 10-73657 | SCREW, FRONT BRACKET TO TOP COWL FRAME (1 1/2") |
| 46 | 13-8M0204647 | LOCKWASHER, FRONT SUPPORT BRACKET SCREW |
| 47 | 37640 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 48 | 13-8M0204647 | LOCKWASHER, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 49 | 11-22053 | NUT, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
Regular maintenance keeps your Mercury 650 (4 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
