Images
Product
Price
Qty
Options
- $83.50
- $83.50
- Unit price
- per
$83.50
$82.50
$82.50
$71.50
- $24.50
- $24.50
- Unit price
- per
$24.50
Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
JLM MARINE PARTS FINDER
AI Precision Parts Finder
Tell us what you need—in your own words. Enter an OEM part number, or share your exact engine model and the part you’re looking for.
To find the most accurate part match for your engine, we cross-reference detailed model specifications, OEM part numbers and compatibility records. Please allow around 30–60 seconds for your personalized results; more complex searches may take a little longer.
Mercury 60 (4-STROKE)(4 CYL.) (0P094500 THRU 0P206999) Parts & Diagrams
🔎 Mercury 60 (4-STROKE)(4 CYL.) Reference Library — Exploded parts diagrams (31 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 60 (4-STROKE)(4 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 60 HP |
| Displacement | 995 cc |
| Bore x Stroke | 65 mm x 75 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 3.0 L (3.17 quart) |
| Recommended Engine Oil | SAE 25W-40 Mercury FourStroke Oil |
| Gear Case Oil Capacity | 440 mL (14.9 fl oz) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5500-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 60 (4-STROKE)(4 CYL.):
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 60 (4-STROKE)(4 CYL.).
▶ACCESSORIES (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 12092A18 | EXTENSION KIT, Driveshaft - 5 Inch Comment: (BIGFOOT) |
▶ADAPTOR PLATE (25 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-859352A01 | GASKET SET |
| 1 | 8M0162935 | DIPSTICK |
| 2 | 825989003 | DIPSTICK TUBE |
| 3 | 8560552 | SEAL |
| 4 | 8289151 | HEAT SHIELD |
| 5 | 17-23784 | PIN, Dowel |
| 6 | 22-629101 | FITTING, Elbow - 90 Degree (.125-27) |
| 7 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 8 | 26-66301 | SEAL, Oil |
| 9 | 23-859594 | BUSHING |
| 10 | 22-384073 | PLUG, Pipe (.500-14) |
| 11 | 825228A17 | ADAPTOR PLATE KIT |
| 12 | 19-822464 | PLUG |
| 13 | 19-48323 | PLUG |
| 14 | 25-845746 | O-RING |
| 15 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 16 | 8M0210772 | BODY, Oil Pressure Relief Comment: (DESIGN II) |
| 17 | 893765 | PLATE, Oil Pickup-Top |
| 18 | 32-854793 | HOSE, Oil Pickup |
| 19 | 893700 | BAFFLE |
| 20 | 54-855228 | CLAMP |
| 21 | 10-4007455 | SCREW, (M6 x 50) |
| 22 | 856592 | DEFLECTOR, Oil Comment: (DESIGN I) |
| 23 | 8M0210772 | BODY ASSEMBLY, Oil Pressure Relief Comment: (DESIGN I) |
| 24 | 27-8M0213113 | GASKET |
▶BOTTOM COWL (18 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 4020-826277T1 | BOTTOM COWL Comment: (LONG-PORT) |
| 2 | 4020-826278T7 | BOTTOM COWL Comment: (LONG-STBD.) |
| 3 | 10-82684430 | SCREW, (M6 x 30) |
| 4 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 5 | 825238002 | SEAL |
| 6 | 12-855576 | WASHER |
| 7 | 27-855627 | GASKET |
| 8 | 10-82684460 | SCREW, (M6 x 60) |
| 9 | 22-827948 | FITTING |
| 10 | 826273001 | BOOT |
| 11 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 12 | 825782F1 | LEVER, Cowl Latch |
| 13 | 23-812707 | BUSHING |
| 14 | 13-12134 | WASHER, Wave |
| 15 | 893766 | LATCH HOOK |
| 16 | 10-1993716 | SCREW, (M6 x 16) |
| 17 | 25-19565002 | GROMMET |
| 18 | 87-8M0235191 | SWITCH, Trim |
▶CAMSHAFT (11 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 893505T01 | CYLINDER HEAD ASSEMBLY |
| 1 | 400-8M0183247 | CAMSHAFT |
| 2 | 857087T1 | PUMP ASSEMBLY, Oil |
| 3 | 25-857096 | O-RING |
| 4 | NSS | NOT SOLD SEPARATE |
| 5 | 25-857094 | O-RING |
| 6 | 25-857093 | O-RING |
| 7 | 10-875206 | SCREW, (M6 x 16) |
| 8 | 10-4000333 | SCREW, (M6 x 40) |
| 9 | 17-878183 | PIN, Dowel |
| 10 | 17-826149 | PIN |
▶CARBURETOR (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 8542561 | REPAIR KIT, Carburetor Comment: (1 Per Carburetor) |
| 1 | 3329-857102T4 | CARBURETOR Comment: (BOTTOM) |
| 2 | 10-854246 | SCREW |
| 3 | 854245 | PLATE |
| 4 | 27-8542572 | GASKET |
| 5 | 854254T3 | ENRICHENER |
| 6 | NSS | NOT SOLD SEPARATE |
| 7 | 854255 | PLATE |
| 8 | 19-880814 | CAP |
| 9 | 10-880841 | SCREW, Adjusting |
| 10 | 25-880842 | O-RING |
| 11 | 24-880815 | SPRING |
| 12 | 803912 | JET (SLOW) |
| 13 | 25-880843 | O-RING |
| 14 | 19-880844 | PLUG |
| 15 | 98,803915 | JET (MAIN) |
| 16 | 8039142 | MAIN NOZZLE |
| 17 | 854247 | VALVE, Float |
| 18 | 8542531 | FLOAT |
| 19 | 17-8542581 | PIN, Float |
| 20 | 10-880845 | SCREW |
| 21 | 27-8542573 | GASKET |
| 22 | 8039171 | FLOAT BOWL Comment: (CENTERS/BOTTOM) |
| 23 | 10-8542463 | SCREW |
| 24 | 10-8542464 | SCREW, Drain |
| 25 | 12-8542591 | WASHER |
| 26 | 10-803925 | SCREW, Synchronization Comment: (TOP/CENTERS) |
| 27 | 24-880846 | SPRING Comment: (TOP/CENTERS) |
| 28 | 24-803923 | SPRING Comment: (TOP/CENTERS) |
| 29 | 10-803913 | SCREW Comment: (BOTTOM) |
| 30 | 24-854249 | SPRING Comment: (BOTTOM) |
| 31 | 24-880847 | SPRING |
| 32 | 8542511 | PLUNGER |
| 33 | 10-880848 | SCREW |
| 34 | NSS | NOT SOLD SEPARATE |
| 35 | 880849 | PLUNGER ROD |
▶CRANKSHAFT (13 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-859352A01 | GASKET SET |
| 1 | 413-857077T02 | CRANKSHAFT |
| 2 | 8M0151047 | SEAL |
| 3 | 8M0151048 | SEAL |
| 4 | 600-893530T01 | CONNECTING ROD |
| 5 | 10-8M0049884 | BOLT |
| 6 | 23-893630002 | BEARING, Blue |
| 7 | 700-893524T02 | PISTON, w/o Rings Comment: (.50MM Oversized)(Bare Piston) |
| 8 | 39-893525A03 | RING, Piston (TOP) Comment: (.50MM Oversized) |
| 9 | NSS | NOT SOLD SEPARATE, Piston (SECOND) Comment: (.50MM Oversized) |
| 10 | 39-893950 | RING, Oil |
| 11 | 41-893863 | PIN, Piston |
| 12 | 40-825017 | RETAINER |
▶CYLINDER BLOCK AND CRANKCASE (28 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-859352A01 | GASKET SET |
| 1 | 800-893502T02 | CYLINDER BLOCK |
| 2 | 17-825010 | PIN, Dowel |
| 3 | 22-479452 | PLUG |
| 4 | 22-384073 | PLUG, Pipe (1/2-14) |
| 5 | 22-416223 | PLUG, Pipe (.750-14) |
| 6 | 23-893631002 | BEARING, Blue |
| 7 | 822625 | NIPPLE, (M20) |
| 8 | 10-82506182 | SCREW, (M8 x 82) |
| 9 | 10-8M0205943 | SCREW, (M6 x 35) |
| 10 | 27-8M0213112 | GASKET |
| 11 | 35-8M0162829 | FILTER, Oil |
| 12 | 27-8M0224375 | GASKET |
| 13 | 8M0188836 | COVER, Exhaust |
| 14 | 22-479452 | PLUG |
| 15 | 14586 | THERMOSTAT |
| 16 | 27-8M0204714 | GASKET |
| 17 | 27-8M0177107 | GASKET |
| 18 | 8M0188835 | COVER |
| 19 | 10-8M0205943 | SCREW, (M6 x 35) |
| 20 | 22-996642 | FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 21 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 22 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) (Cut to 11 IN.) |
| 23 | 8M0214984 | SENSOR ASSEMBLY, Temperature |
| 24 | 25-627021 | O-RING, (.301 x .070) |
| 25 | 893697 | LIFTING EYE |
| 26 | 10-857139 | SCREW, (M8 x 35) |
| 27 | NSS | NOT SOLD SEPARATE |
▶CYLINDER HEAD (28 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 893505T01 | CYLINDER HEAD ASSEMBLY |
| 1 | 893505T06 | CYLINDER HEAD ASSEMBLY |
| 2 | 858266 | GUIDE |
| 3 | 10-4000325 | SCREW, (M6 x 8) |
| 4 | 12-859768 | WASHER |
| 5 | 26-893549 | SEAL, Oil |
| 6 | 22-875209 | PIPE PLUG |
| 7 | 25-8M0011870 | SEAL |
| 8 | 8M0174400 | COVER |
| 9 | NSS | NOT SOLD SEPARATE |
| 10 | 858277 | PLATE, Baffle |
| 11 | 10-4005685 | SCREW, (M4 x 10) |
| 12 | 22-629101 | FITTING, Elbow - 90 Degree (.125-27) |
| 13 | 27-8M0118179 | GASKET |
| 14 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 15 | 10-82503395 | SCREW, (M9 x 95) |
| 16 | 17-825010 | PIN, Dowel |
| 17 | 859578A1 | PLUG ASSEMBLY, Oil |
| 18 | 25-8M0204673 | O-RING, (.921 x .139) |
| 19 | NSS | NOT SOLD SEPARATE, Decal |
| 20 | NSS | NOT SOLD SEPARATE, Decal |
| 21 | NSS | NOT SOLD SEPARATE, POWERHEAD ID |
| 22 | 826060 | DIAPHRAGM |
| 23 | 877844 | DASHPOT Comment: (NON HANDLE) |
| 24 | 10-40011126 | SCREW, (M6 x 13) Stainless Steel |
| 25 | 32-77653101 | HOSE, (48.00 Inches Bulk) (Cut to 19 IN.) |
| 26 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 27 | 10-893745025 | SCREW, (M6 x 25) |
▶DRIVESHAFT HOUSING (26 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1503-852421T07 | HOUSING, Driveshaft |
| 2 | 825220T06 | PIPE, Exhaust |
| 3 | 10-824459110 | SCREW, (M8 x 110) Stainless Steel |
| 4 | 10-88960845 | SCREW, (M8 x 45) |
| 5 | 8288181 | PLUG, Drain |
| 6 | 27-8M0204692 | GASKET |
| 7 | 826276 | BUMPER |
| 8 | 8M0151042 | GROMMET |
| 9 | 16-903501 | STUD, (M10 x 100) Comment: (BIGFOOT) |
| 10 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 11 | 11-40140 | NUT, (M10) |
| 12 | 32-897971A01 | TUBE, Water |
| 13 | 54-828529 | GUIDE |
| 14 | 8M0043364 | BUMPER Comment: (LONG) |
| 15 | 42941001 | SEAL, Water Tube |
| 16 | 893770 | PLATE |
| 17 | 10-1993325 | SCREW, (M10 x 25 MM) |
| 18 | 22-85822A7 | SPEEDOMETER PICK UP |
| 19 | 22-85822T | CONNECTOR, Straight |
| 20 | 22-8M0181450 | FITTING |
| 21 | 23-813745 | SPACER |
| 22 | 43585 | COUPLING |
| 23 | 23-855623 | BUSHING |
| 24 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel |
| 25 | 11-40140 | NUT, (M10) |
| 26 | 54-816311T | TIE STRAP, (8.00 Inches) |
▶ELECTRICAL COMPONENTS (47 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-893678T03 | POWERHEAD ASSEMBLY |
| 1 | 825096T01 | RELAY |
| 2 | 8M0010250 | BRACKET |
| 3 | 825074 | SOLENOID PLATE |
| 4 | 11-401386 | NUT, (M6) Stainless Steel |
| 5 | 84-88439A9 | CABLE ASSEMBLY, Battery - Positive |
| 6 | 85-880786 | BOOT, Insulator - Red |
| 7 | 84-93388A16 | CABLE ASSEMBLY, (8.50 Inches) |
| 8 | 84-88439A4 | CABLE ASSEMBLY, Battery - Negative |
| 9 | 50-893888T | STARTER MOTOR ASSEMBLY (SEE BREAKDOWN ON STARTER MOTOR) |
| 10 | 10-40011153 | SCREW, (M8 x 45) Stainless Steel |
| 11 | 87-8M0098207 | PRESSURE SWITCH |
| 12 | 8M0082988 | SENSOR |
| 13 | 10-40011107 | SCREW, (M5 x 16) Stainless Steel |
| 14 | 10-82130025 | SCREW, (M6 x 25) |
| 15 | 12-8M0214930 | WASHER |
| 16 | 859224 | PLATE |
| 17 | 856836001 | RETAINER |
| 18 | 856040 | BRACKET |
| 19 | 10-82129114 | SCREW, (M6 x 14) |
| 20 | 92753 | RETAINER |
| 21 | 23-856954 | BUSHING |
| 22 | 25-8M0190980 | GROMMET |
| 23 | 87843303S | ECM, Engine Control Module |
| 24 | 23-8539201 | BUSHING |
| 25 | 10-82129140 | SCREW, (M6 x 40) |
| 26 | 33-827858Q | SPARK PLUG, NGK-DPR6EA-9 |
| 27 | 339-859738T1 | COIL ASSEMBLY, Ignition |
| 28 | NSS | NOT SOLD SEPARATE, Decal Comment: (COIL ID #1) |
| 29 | NSS | NOT SOLD SEPARATE, Decal Comment: (COIL ID #2) |
| 30 | NSS | NOT SOLD SEPARATE, Decal Comment: (COIL ID #3) |
| 31 | NSS | NOT SOLD SEPARATE, Decal Comment: (COIL ID #4) |
| 32 | 10-82684430 | SCREW, (M6 x 30) |
| 33 | 84-857111T2 | HARNESS ASSEMBLY, Engine Wiring |
| 34 | 88-812619 | FUSE, Yellow - 20 Ampere (SFE) |
| 35 | 828054 | COVER, Fuse |
| 36 | 84-852375A6 | HARNESS ASSEMBLY, Extension Comment: (HANDLE) |
| 37 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 38 | 883071T1 | REGULATOR, Voltage |
| 39 | 893771 | BRACKET |
| 40 | 8308971 | FOAM PAD |
| 41 | 10-8248329 | SCREW, (M6 x 40) |
| 42 | 10-82129110 | SCREW, (M6 x 10) |
| 43 | 10-8248324 | SCREW, (M6 x 16) |
| 44 | 13541 | PLUG, Male |
| 45 | 10-40011149 | SCREW, (M8 x 25) Stainless Steel |
| 46 | 11-94330 | NUT, (.250-20) Brass |
▶FLYWHEEL (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 893505T01 | CYLINDER HEAD ASSEMBLY |
| 1 | 859284T2 | FLYWHEEL COVER |
| 2 | 10-8248326 | SCREW, (M6 x 25 MM) |
| 3 | 37-804655A01 | DECAL, EPA Label Information Comment: (SEE NOTE) |
| 4 | 284-832010T32 | FLYWHEEL |
| 5 | 8331045 | GEAR, Driven |
| 6 | NSS | NOT SOLD SEPARATE, Decal |
| 7 | NSS | NOT SOLD SEPARATE, Decal |
| 8 | NSS | NOT SOLD SEPARATE, Decal |
| 9 | 11-893789 | NUT |
| 10 | 12-893762 | WASHER |
| 11 | 10-4013930 | SCREW, (M5 x 30) |
| 12 | 398-852387T7 | STATOR |
| 13 | 834838 | LOAD RING |
| 14 | 833102T | GEAR, Drive |
| 15 | 10-82761140 | SCREW, (M10 x 40) |
| 16 | 12-4002320 | WASHER |
| 17 | 28-91800 | KEY, Woodruff |
| 18 | 28-893761 | KEY |
| 19 | 8M0151040 | BELT |
| 20 | 54-816311T | TIE STRAP, (8.00 Inches) |
▶FUEL LINES (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 22-822771 | CONNECTOR |
| 2 | 22-878404 | FITTING, 45 Degree |
| 3 | 22-878593 | Y-CONNECTOR |
| 4 | 54-878425 | CLIP |
| 5 | 32-878181 | HOSE |
| 6 | 32-85682239 | TUBING, (17.00 Inches Bulk) (Cut to 3-1/2 IN) |
| 7 | 32-82381310 | HOSE |
| 8 | 8566101 | LINKAGE |
| 9 | 23-803896 | BUSHING |
| 10 | 18-880850 | COTTER PIN |
| 11 | 12-8542592 | WASHER |
| 12 | 32-856607 | HOSE |
| 13 | 32-856609 | HOSE |
| 14 | 32-856611 | HOSE and SLEEVE |
| 15 | 32-880773 | HOSE |
| 16 | 32-856613 | HOSE |
| 17 | 32-880772 | HOSE |
| 18 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 19 | 56762 | TIE STRAP, (4.00 Inches) |
▶FUEL PUMP (24 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-859352A01 | GASKET SET |
| 1 | 35-877565T1 | FILTER, Fuel |
| 2 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 3 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (Cut to 14 IN.) |
| 4 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (Cut to 19 IN.) |
| 5 | 22-8M0148585 | CONNECTOR ASSEMBLY, Fuel |
| 6 | 826398T3 | PUMP, Fuel |
| 7 | 10-809564 | SCREW, (M5 x 35) |
| 8 | 809565 | COVER |
| 9 | 8095611 | DIAPHRAGM |
| 10 | 10-41889M | SCREW, (M3 x 5) |
| 11 | 11-82537M | NUT |
| 12 | 21-41888M | CHECK VALVE |
| 13 | 8095612 | DIAPHRAGM |
| 14 | 17-8095661 | PIN |
| 15 | 24-809562 | SPRING |
| 16 | 11-82388M | NUT, (M5) |
| 17 | 24-8095621 | SPRING |
| 18 | 8095631 | PLUNGER |
| 19 | 25-8M0052669 | O-RING |
| 20 | 10-82684430 | SCREW, (M6 x 30) |
| 21 | 19-854310 | PLUG |
| 22 | 54-8M0024808 | J CLIP |
| 23 | 8M0007776 | DEFLECTOR, Cowl |
▶GEAR HOUSING(DRIVESHAFT)(1.83:1 GEAR RATIO) (37 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 46-812966A12 | REPAIR KIT, Water Pump |
| 1 | 1671-9760T42 | GEAR HOUSING ASSEMBLY, Basic |
| 2 | 10-79953Q04 | SCREW KIT, (.375-16 x .250) Drain |
| 3 | 10-79953Q04 | SCREW KIT, (.375-16 x .250) Drain |
| 4 | 12-191833 | WASHER |
| 5 | 17-8M0084244 | PIN, Dowel - With Hole (.375 x .625) |
| 6 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 7 | 22-878089 | PLUG, Pipe (.0625-27) |
| 8 | 31-812768 | BEARING, Roller |
| 9 | 818226A1 | SEAL/PLATE KIT |
| 10 | NSS | NOT SOLD SEPARATE |
| 11 | 43-859103T | GEAR, Pinion - 12 Teeth |
| 12 | 11-55910 | NUT, (.437-20) |
| 13 | 859607A1 | SHIFT SHAFT ASSEMBLY |
| 14 | 53-29641 | E RING |
| 15 | 23-813696A2 | BUSHING ASSEMBLY |
| 16 | 25-45258 | O-RING, (.987 x .103) |
| 17 | 26-8M0204708 | SEAL, Oil |
| 18 | 45-859102 | DRIVESHAFT, Long |
| 19 | 15-812770A1 | SHIM SET |
| 20 | 31-8M0166756 | BEARING ASSEMBLY, Roller |
| 21 | NSS | NOT SOLD SEPARATE |
| 22 | 11-8128201 | NUT |
| 23 | 46-812966A7 | BASE ASSEMBLY, Water Pump |
| 24 | 25-8M0204651 | O-RING, (1.859 x .139) |
| 25 | 26-814669 | SEAL, Oil |
| 26 | 26-814670 | SEAL, Oil |
| 27 | 47-19453T | IMPELLER |
| 28 | 28-8M0032831 | KEY |
| 29 | 12-8M0204720 | WASHER |
| 30 | 46-812966A12 | PUMP ASSEMBLY, Water |
| 31 | 27-8M0224241 | GASKET (LOWER) |
| 32 | 27-822189 | GASKET, Upper Water Pump |
| 33 | 19700A2 | FACE PLATE |
| 34 | 10-8248324 | SCREW, (M6 x 16) |
| 35 | 760394 | CAM, Shift Control |
| 36 | 8M0151045 | COUPLER |
▶GEAR HOUSING(DRIVESHAFT)(2.31:1 GEAR RATIO) (43 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 47-8M0100526 | REPAIR KIT, Water Pump Impeller |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic Comment: (BASIC) |
| 2 | 17-8M0084244 | PIN, Dowel - With Hole (.375 x .625) (FRONT) |
| 3 | 43046 | TUBE, Oiler |
| 4 | 10-79953Q04 | SCREW KIT, (.375-16 x .250) Drain |
| 5 | 12-191833 | WASHER |
| 6 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) (REAR) |
| 7 | 31640T07 | TRIM TAB |
| 8 | 10-825427 | SCREW, (.437-14 x 1.250) Stainless Steel |
| 9 | 12-451761 | WASHER, (.453 x .812 x .105) Black Oxide |
| 10 | 43040T1 | CARRIER ASSEMBLY |
| 11 | NSS | NOT SOLD SEPARATE |
| 12 | 97-826134Q | ANODE |
| 13 | 11-401386 | NUT, (M6) Stainless Steel |
| 14 | 10-4000333 | SCREW, (M6 x 40) |
| 15 | 43-44484T | GEAR, Pinion (13 Teeth) |
| 16 | 11-35921 | NUT, (.625-18) |
| 17 | 850307 | CAM, Shift Control |
| 18 | 31-42677A1 | BEARING ASSEMBLY, Tapered Roller |
| 19 | 15-44492A1 | SHIM SET |
| 20 | 45-859105A1 | DRIVESHAFT ASSEMBLY |
| 21 | 42461A1 | SLEEVE/RING KIT |
| 22 | NSS | NOT SOLD SEPARATE |
| 23 | 43055A4 | COVER ASSEMBLY, Water Pump |
| 24 | 27-430331 | GASKET |
| 25 | 27-8M0214931 | GASKET |
| 26 | 26-43036 | SEAL, Oil (LOWER) |
| 27 | 26-43035 | SEAL, Oil (UPPER) |
| 28 | 27-8172771 | GASKET |
| 29 | 817275A2 | HOUSING KIT, Upper Water Pump |
| 30 | 8M0204709 | FACEPLATE |
| 31 | 10-8M0214957 | SCREW, (M6 x 30) |
| 32 | 8M0204658 | SEAL |
| 33 | 28-8M0204723 | KEY |
| 34 | 47-43026T2 | IMPELLER |
| 35 | 10-8248326 | SCREW, (M6 x 25 MM) |
| 36 | 853906A1 | SHIFT SHAFT ASSEMBLY |
| 37 | 53-29641 | E RING |
| 38 | 23-43052A4 | BUSHING ASSEMBLY |
| 39 | 25-8M0204681 | O-RING, (1.424 x .103) |
| 40 | 26-8M0204708 | SEAL, Oil |
| 41 | 10-8248326 | SCREW, (M6 x 25 MM) |
| 42 | 26-861415 | FACE SEAL |
▶GEAR HOUSING(PROP SHAFT)(1.83:1 GEAR RATIO) (33 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-814669A2 | SEAL KIT, Gear Housing |
| 1 | 1671-9760T42 | GEAR HOUSING ASSEMBLY, Basic |
| 37 | 15-812769A1 | SHIM SET |
| 38 | 31-8M0103476 | BEARING ASSEMBLY, Tapered Roller |
| 39 | NSS | NOT SOLD SEPARATE |
| 40 | 43-859101T2 | GEAR, Forward - 22 Teeth |
| 41 | 31-21739 | BEARING, Roller |
| 42 | 8129291 | FOLLOWER, Cam |
| 43 | 20843 | SLIDE |
| 44 | 24-38114 | SPRING |
| 45 | 52-813697T | CLUTCH |
| 46 | 17-8M0020942 | PIN, Cross |
| 47 | 24-815418 | SPRING |
| 48 | 44-14493 | PROPELLER SHAFT |
| 49 | 43-859104T | GEAR, Reverse - 22 Teeth |
| 50 | 30-20839T | BEARING, Ball |
| 51 | 8M0168900 | CARRIER ASSEMBLY, Bearing |
| 52 | 25-815460 | O-RING |
| 53 | 31-21700 | BEARING, Needle |
| 54 | 26-8M0205511 | SEAL, Oil |
| 55 | 26-8M0203757 | SEAL, Oil |
| 56 | 10-85594030 | SCREW, (M8 x 30) |
| 57 | 12-855941 | WASHER, (.323 x .590 x .112) Stainless Steel |
| 58 | 8227731 | INSERT, Threaded |
| 59 | NSS | NOT SOLD SEPARATE |
| 60 | 17264T2 | TRIM TAB, Zinc |
| 61 | 10-4000377 | SCREW, (M10 x 30) |
| 62 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 63 | 73345A1 | THRUST HUB |
| 64 | 11-69578Q1 | PROP NUT KIT |
| 65 | 14-8M0214942 | TAB WASHER |
| 66 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 67 | 10-4000380 | SCREW, (M10 x 45) |
▶GEAR HOUSING(PROP SHAFT)(2.31:1 GEAR RATIO) (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-43035A4 | SEAL KIT, Gear Housing |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic |
| 2 | 31-30894A1 | BEARING SET, Cup And Cone |
| 3 | NSS | NOT SOLD SEPARATE |
| 4 | 43-859472A3 | GEAR ASSEMBLY, Forward - 30 Teeth |
| 5 | 31-30895T | BEARING, Needle |
| 6 | 53-856823 | RING, Retaining |
| 7 | 850315A1 | FOLLOWER KIT, Cam |
| 8 | 30-44530 | BALL |
| 9 | NSS | NOT SOLD SEPARATE |
| 10 | 24-850327 | SPRING |
| 11 | 52-850048T | CLUTCH |
| 12 | 17-8M0100263 | PIN, Cross |
| 13 | 24-30893 | SPRING |
| 14 | 44-8M0140445 | PROPELLER SHAFT |
| 15 | 43-850034T | GEAR, Reverse (30 Teeth) |
| 16 | 8M0168901 | CARRIER ASSEMBLY, Bearing |
| 17 | 25-8M0214974 | O-RING, (3.609 x .139) |
| 18 | 31-30956T | BEARING, Needle |
| 19 | 26-8M0205728 | SEAL, Oil (INNER) |
| 20 | 26-8M0205729 | SEAL, Oil (OUTER) |
| 21 | 31-12578T | BEARING, Roller |
| 22 | 12-12577 | THRUST WASHER |
| 23 | 31-12576 | BEARING, Thrust |
| 24 | 16-8M0034456 | STUD, (M8 x 48) |
| 25 | 12-855941 | WASHER, (.323 x .590 x .112) Stainless Steel |
| 26 | 11-401378 | NUT, (M8) |
| 27 | 15-44491A1 | SHIM SET |
| 28 | 8227731 | INSERT, Threaded |
| 29 | NSS | NOT SOLD SEPARATE, Decal |
| 30 | NSS | NOT SOLD SEPARATE, Decal |
| 31 | 13191Q01 | THRUST WASHER |
| 32 | 11-52707Q1 | PROP NUT KIT, (.750-16) |
| 33 | 14-816629Q | TAB WASHER |
| 34 | 10-4000380 | SCREW, (M10 x 45) |
| 35 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
▶INTAKE (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-859352A01 | GASKET SET |
| 1 | 10-82615890 | SCREW, (M6 x 90) |
| 2 | 857105T | INTAKE, Air |
| 3 | 25-8250572 | O-RING |
| 4 | 857103T | PLATE |
| 5 | 857104T1 | ISOLATOR Comment: (40/50 HP) |
| 6 | 19-827633 | PLUG |
| 7 | 857106A1 | ATTENUATOR KIT, Sound Comment: (USE W/TAPERED BUSHING) |
| 8 | 23-856954 | BUSHING Comment: (TAPERED) |
| 9 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 10 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 11 | 26-856128001 | SEAL |
| 12 | 25-8250572 | O-RING |
| 13 | 25-856525 | O-RING |
| 14 | 17-23784 | PIN, Dowel |
| 15 | 10-8248326 | SCREW, (M6 x 25 MM) |
| 16 | 32-8M0182223 | BREATHER HOSE |
| 17 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 18 | 37-881865 | DECAL, Caution, Start In Gear |
▶INTAKE/EXHAUST VALVE (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 893505T01 | CYLINDER HEAD ASSEMBLY |
| 1 | 8M0065029 | VALVE, Exhaust |
| 2 | 832990T3 | VALVE, Intake |
| 3 | 26-858271 | SEAL |
| 4 | 24-893552 | SPRING, Valve - Outer |
| 5 | 822650 | RETAINER |
| 6 | 28-893554 | KEY |
| 7 | 898821A01 | ROCKER ARM |
| 8 | 10-825046 | SCREW |
| 9 | 11-826150 | NUT |
| 10 | 8570851 | SHAFT, Rocker |
| 11 | NSS | NOT SOLD SEPARATE |
| 12 | 893560 | BRACKET |
| 13 | 893561 | BRACKET |
| 14 | 24-893562 | SPRING |
| 15 | 10-875218 | SCREW, (M8 x 23) |
| 16 | 27-893645 | GASKET |
| 17 | 17-859575 | PIN |
| 18 | 24-893563 | SPRING, Overload |
▶LINKAGE(HANDLE) (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 10-40011158 | SCREW, (M8 x 70) Stainless Steel |
| 2 | 10-8147763 | SCREW, (M6 x 60) |
| 3 | 11-401196 | NUT, (M6) |
| 4 | 42942 | CAP |
| 5 | 822682A4 | LEVER ASSEMBLY, Throttle |
| 6 | 23-825078 | BUSHING |
| 7 | 10-8248326 | SCREW, (M6 x 25 MM) |
| 8 | 858245 | SHIFT GUIDE |
| 9 | 10-82239312 | SCREW, (M5 x 12) |
| 10 | 858246 | SHIFT SLIDE |
| 11 | 12016A2 | DETENT/SPRING KIT |
| 12 | NSS | NOT SOLD SEPARATE |
| 13 | 858247 | SHIFT ROD |
| 14 | 18-210711 | COTTER PIN |
| 15 | 11-401386 | NUT, (M6) Stainless Steel |
| 16 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 17 | 858248 | SHIFT LINK |
| 18 | 23-48475 | BUSHING |
| 19 | 850166T2 | LEVER ASSEMBLY, Shift Shaft |
| 20 | 23-850165 | BUSHING |
| 21 | 8535853 | CAM, Throttle |
| 22 | 23-309772 | SPACER |
| 23 | 12-4002314 | WASHER |
| 24 | 10-40056107 | SCREW, (M5 x 16) |
| 25 | 87-8M0052927 | SWITCH |
| 26 | 824923 | PLATE |
| 27 | 10-88075020 | SCREW, (M3.5 x 20) Stainless Steel |
| 28 | 830294T1 | BRACKET Comment: (HANDLE) |
| 29 | 877844 | DASHPOT Comment: (NON-HANDLE) |
| 30 | 10-40011126 | SCREW, (M6 x 13) Stainless Steel |
| 31 | 822682A4 | LEVER, Throttle |
| 32 | 826587 | RETAINER |
▶LINKAGE(REMOTE) (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 10-40011158 | SCREW, (M8 x 70) Stainless Steel |
| 2 | 10-8147763 | SCREW, (M6 x 60) |
| 3 | 11-401196 | NUT, (M6) |
| 4 | 42942 | CAP Comment: (50/60) |
| 5 | 822682A4 | LEVER ASSEMBLY, Throttle |
| 6 | 883160 | RETAINER |
| 7 | 23-825078 | BUSHING |
| 8 | 822459 | RETAINER |
| 9 | 8259571 | LEVER, Shift |
| 10 | 827706A4 | BRACKET |
| 11 | 98889 | LATCH |
| 12 | 10-8248324 | SCREW, (M6 x 16) |
| 13 | 23-15885 | SLEEVE |
| 14 | 893777 | SHIFT ROD |
| 15 | 8501631 | GUIDE, Shift Rod |
| 16 | 893769A01 | SHIFT LINK |
| 17 | 23-48475 | BUSHING |
| 18 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 19 | 11-401386 | NUT, (M6) Stainless Steel |
| 20 | 18-210711 | COTTER PIN |
| 21 | 850166T2 | LEVER ASSEMBLY, Shift Shaft |
| 22 | 23-850165 | BUSHING |
| 23 | 8535853 | CAM, Throttle |
| 24 | 23-309772 | SPACER |
| 25 | 12-4002314 | WASHER |
| 26 | 10-40056107 | SCREW, (M5 x 16) |
| 27 | 881283F | SPACER, Throttle Stop Comment: (40) |
| 28 | 822682A4 | LEVER, Throttle |
| 29 | 826587 | RETAINER |
▶POWER TRIM (27 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 84-826802T18 | HARNESS/RELAY ASSEMBLY, Trim |
| 1 | 893943A01 | SHOCK ROD KIT |
| 2 | 8M0171822 | PISTON ASSEMBLY, Memory |
| 3 | 25-8M0171819 | O-RING KIT, Rebuild |
| 4 | NSS | NOT SOLD SEPARATE |
| 5 | 893904T01 | CYLINDER ASSEMBLY |
| 6 | 893944A01 | VALVE KIT, Trim Limit Comment: (BIGFOOT) |
| 7 | 893906A02 | PUMP ASSEMBLY |
| 8 | 893907A02 | MOTOR KIT |
| 9 | 22-8134351 | PLUG |
| 10 | 893929A01 | MANUAL RELEASE ASSEMBLY |
| 11 | 893909A02 | MANIFOLD KIT |
| 12 | 10-809876A1 | SCREW KIT (MOTOR) |
| 13 | 809877A1 | DRIVESHAFT/SEAL KIT |
| 14 | 35-893912A02 | FILTER KIT |
| 15 | 893913A02 | POPPET KIT |
| 16 | 88238A18 | CABLE ASSEMBLY |
| 17 | 17-821539 | PIN, Trilobe |
| 18 | 17-19607 | PIN |
| 19 | 17-822869001 | PIN |
| 20 | 84-826802T17 | HARNESS ASSEMBLY, Trim |
| 21 | 8M0207773 | RELAY ASSEMBLY |
| 22 | 828102 | BRACKET |
| 23 | 25-818967 | GROMMET |
| 24 | 23-8M0214955 | BUSHING |
| 25 | NSS | NOT SOLD SEPARATE |
| 26 | 10-82684430 | SCREW, (M6 x 30) |
▶SERVICE/SUPPORT MATERIAL (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-804655A02 | DECAL, EPA Label Information Comment: (SEE NOTE) |
▶STARTER MOTOR (11 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 50-893888T | STARTER MOTOR ASSEMBLY |
| 2 | 15384 | THRU BOLT |
| 3 | 891752 | DRIVE KIT |
| 4 | 8236386 | ARMATURE |
| 5 | 68575T2 | PINION |
| 6 | 8236392 | DRIVE CAP |
| 7 | 8119013 | CAP, Commutator |
| 8 | 898265016 | BRUSH/SPRING KIT |
| 9 | 898265014 | HOLDER |
| 10 | F15158 | SCREW |
| 11 | 37-8272822 | DECAL, Warning, High Voltage |
▶STEERING ARM (30 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-896963 | NUT, (M12) |
| 2 | 893773002 | STRAP Comment: (DESIGN III)(THICK STRAP) |
| 3 | 8M0224385 | MOUNT |
| 4 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 5 | 8M0156878 | BUMPER |
| 6 | 53-89531 | RING, Retaining |
| 7 | 8M0118183 | ARM, Steering |
| 8 | 816667F1 | BRACKET Comment: (NON-HANDLE) |
| 9 | 14-8M0009820 | TAB WASHER Comment: (NON-HANDLE) |
| 10 | 10-4000377 | SCREW, (M10 x 30) Comment: (NON-HANDLE) |
| 11 | 10-898835001 | BOLT, (M12 x 154) |
| 12 | 23-8279971 | SPACER |
| 13 | 8M0219909 | SWIVEL TUBE |
| 14 | 84-88238T01 | CABLE ASSEMBLY |
| 15 | 8M0207768 | CABLE ASSEMBLY, Ground |
| 16 | 10-823567105 | SCREW, (M10 x 105) Hex Flange - Stainless Steel |
| 17 | 893703 | BRACKET |
| 18 | 10-878607 | SCREW, (#10-16 x .375) Comment: (SELF-TAPPING) |
| 19 | 11-8M0204726 | NUT, (.375-24) Stainless Steel Comment: (HANDLE) |
| 20 | 823792 | LEVER Comment: (HANDLE) |
| 21 | 12-29330 | WASHER Comment: (HANDLE) |
| 22 | 821961 | ROD (THREADED) Comment: (HANDLE) |
| 23 | 821957 | BRAKE PLATE Comment: (HANDLE) |
| 24 | 8165621 | DISC Comment: (HANDLE) |
| 25 | 8M0007471 | PLATE Comment: (HANDLE) |
| 26 | 8165621 | DISC Comment: (HANDLE) |
| 27 | 10-768042 | SHOULDER SCREW, Hex Comment: (HANDLE) |
| 28 | 12-4002321 | WASHER, (12.80 mm x 24.0 mm x 2.4 mm) Stainless Steel Comment: (DESIGN I) |
| 29 | 893773002 | STRAP Comment: (Qty. of 1 used on DESIGN I) |
| 30 | 12-20959 | WASHER Comment: (DESIGN II) |
▶SWIVEL BRACKET (16 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19608A14 | ATTACHING KIT, Engine Steering Comment: (ELECTRIC NON HANDLE) |
| 2 | 10-823919 | SCREW, (.375-24 x 1.500) Comment: (ELECTRIC NON HANDLE) |
| 3 | 12-8M0109680 | WASHER, (.390 x .546 x .12) Comment: (ELECTRIC NON HANDLE) |
| 4 | 12-37828 | WASHER, (.390 x .625 x .062) Stainless Steel Comment: (ELECTRIC NON HANDLE) |
| 5 | 11-8M0204726 | NUT, (.375-24) Stainless Steel Comment: (ELECTRIC NON HANDLE) |
| 6 | 822397 | PUCK Comment: (ELECTRIC NON HANDLE) |
| 7 | 23-8217711 | BUSHING |
| 8 | 1401-850066T01 | SWIVEL BRACKET |
| 9 | 23-19606 | BEARING |
| 10 | 22-8M0169589 | FITTING, Grease Comment: (QTY. OF 3 REQUIRED ON HANDLE VERSIONS) |
| 11 | 37-8237011 | DECAL, Co-Pilot Comment: (HANDLE) |
| 12 | NSS | NOT SOLD SEPARATE, Decal |
| 13 | 23-821777 | BUSHING (LOWER) |
| 14 | 26-8M0205512 | SEAL |
| 15 | 10-40011149 | SCREW, (M8 x 25) Stainless Steel Comment: (NON-HANDLE) |
| 16 | 8282451 | SEAL Comment: (NON-HANDLE) |
▶TILLER HANDLE (38 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 822148T06 | COVER KIT |
| 2 | 822150 | PULLEY |
| 3 | NSS | NOT SOLD SEPARATE |
| 4 | 10-878608 | SCREW, (#10-16 x .500) Comment: (SELF TAPPING) |
| 5 | 4324210 | CABLE ASSEMBLY, Throttle (30.50 Inches) |
| 6 | 4324211 | CABLE ASSEMBLY, Throttle (41.50 Inches) |
| 7 | 85-960099 | SLEEVE, (12.00 Inches) |
| 8 | 10-82526225 | SCREW, (M8 x 25 MM) |
| 9 | 8M0072298 | COVER |
| 10 | 23-821477 | BUSHING |
| 11 | 828813T1 | ARM, Steering Handle |
| 12 | 822441 | RETAINER |
| 13 | 10-40011107 | SCREW, (M5 x 16) Stainless Steel |
| 14 | 10-8M0204707 | SCREW, (M6 x 25) |
| 15 | 892995 | LOCK, Throttle |
| 16 | 24-96203 | SPRING |
| 17 | 821972T | KNOB, Throttle |
| 18 | 8M0138696 | TILLER TUBE |
| 19 | 37-8242004 | DECAL |
| 20 | 821465 | HANDLE, Throttle |
| 21 | 8M0221732 | GRIP |
| 22 | 87-8M0104614 | SWITCH, Stop |
| 23 | 823687 | CLIP |
| 24 | 87-11083A31 | SWITCH, Stop |
| 25 | 8M0032846 | RETAINER, Brass |
| 26 | 821455A4 | BRACKET, Tiller |
| 27 | 13-826792 | WAVE WASHER |
| 28 | 23-821477 | BUSHING |
| 29 | 12-827314 | WASHER |
| 30 | 32-828547633 | CONDUIT, (.620 Inside Diameter x 3.00 Feet Bulk) |
| 31 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 32 | 37-82409316 | DECAL, F-N-R Shift |
| 33 | 15920Q54 | LANYARD ASSEMBLY |
| 34 | 10-40011151 | SCREW, (M8 x 35) Stainless Steel |
| 35 | 830180A01 | HANDLE |
| 36 | 23-830181 | BUSHING |
| 37 | 14-8M0009820 | TAB WASHER |
| 38 | 10-82484890 | SCREW, (M10 x 90) |
▶TOOLS (71 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 91-8M0053505 | INDICATOR TOOL, Backlash (2.31:1 GEAR RATIO) |
| 1 | 44357Q2 | FLUSHING ATTACHMENT |
| 2 | 802889Q1 | PUMP, Crankcase Oil |
| 3 | 91-802653Q02 | WRENCH, Oil Filter |
| 4 | 91-8M0161873 | HOLDER TOOL, Flywheel |
| 5 | 91-83164M | FLYWHEEL PULLER |
| 6 | 91-99379 | TIMING LIGHT |
| 7 | 91-890451 | ADAPTOR TOOL, Direct Voltage |
| 8 | 91-854009A3 | TACH MULTI METER, DMT 2000 Digital |
| 9 | 91-823686A2 | DIGITAL DIAGNOSTIC TESTER |
| 10 | 91-8226086 | CARTRIDGE |
| 11 | 84-822560A7 | HARNESS ASSEMBLY, Adaptor |
| 12 | 84-822560A10 | HARNESS ASSEMBLY, Adaptor |
| 13 | 91-36392 | GAUGE TOOL, Carburetor |
| 14 | 91-809495001 | REMOVER TOOL, Valve Guide |
| 15 | 91-809496A1 | INSTALLER TOOL, Valve Guide Bushing |
| 16 | 91-809497A1 | REAMER TOOL, Valve Guide |
| 17 | 91-809494A1 | COMPRESSOR TOOL, Valve Spring |
| 18 | NSS | NOT SOLD SEPARATE |
| 19 | FT2997 | COMPRESSOR TOOL, Piston Ring |
| 20 | 92-8M0071838 | ANTI-CORROSION GREASE, 8 oz |
| 21 | 91-24697 | EXPANDER TOOL, Piston Ring |
| 22 | 91-74951 | SPANNER WRENCH |
| 23 | 91-822778A3 | DOWN PRESSURE KIT |
| 24 | 91-63209 | HEAT LAMP |
| 25 | 91-877321A1 | INSTALLATION TOOL, Bearing |
| 26 | 91-804063 | CLAMP TOOL, Tubing |
| 27 | NSS | NOT SOLD SEPARATE (P/N-CG-41-11) |
| 28 | NSS | NOT SOLD SEPARATE (P/N -CG-41-14) |
| 29 | 11-24156 | NUT, (.625-18) |
| 30 | 12-34961 | WASHER |
| 31 | 91-29310 | PLATE |
| 32 | 91-31229 | SHAFT |
| 33 | 91-36571T | WRENCH TOOL, Driveshaft Bearing |
| 34 | 91-37323 | DRIVER ROD TOOL, Needle Bearings |
| 35 | 91-15755T | MANDREL |
| 36 | 91-36569T | DRIVE HEAD TOOL |
| 37 | 91-27780 | PULLER |
| 38 | 91-37241 | PULLER PLATE |
| 39 | 91-37312T | DRIVER HEAD TOOL |
| 40 | 91-817011T | INSTALLER TOOL, Needle Bearing |
| 41 | 84-825003A1 | CABLE ASSEMBLY, DDT, 10FT. |
| 42 | 91-8098712 | VACUUMMATE, Carburetor |
| 43 | 91-817007T | INSTALLER TOOL, Seal |
| 44 | 91-43506T | RETAINING TOOL, Bearing |
| 45 | 91-817005 | INSTALLER TOOL, Bearing |
| 46 | 91-817006 | INSTALLER TOOL, Water Pump Base Seal |
| 47 | 91-817008A2 | LOCATION TOOL, Pinion Gear |
| 48 | 91-817009T | DRIVER TOOL, Bearing Cup |
| 49 | 91-12349A05 | LOCATION TOOL, Pinion |
| 50 | 91-13945 | INSTALLATION TOOL, Bearing |
| 51 | 91-13949 | DRIVER TOOL, Oil Seal |
| 52 | 91-14308T02 | RACE TOOL, Bearing |
| 53 | 91-14309T02 | INSTALLATION TOOL, Bearing |
| 54 | 91-14310T1 | WEAR SLEEVE INSTALLATION TOOL |
| 55 | 91-14311A04 | PRE LOAD TOOL, Bearing |
| 56 | 91-196601 | INDICATOR TOOL, Backlash |
| 57 | 91-31106T | MANDREL, Bearing Driver Cup |
| 58 | 91-31108T | DRIVER, Oil Seal |
| 59 | 91-34569A1 | PULLER ASSEMBLY, Slide Hammer |
| 60 | 91-46086A1 | PULLER JAW ASSEMBLY |
| 61 | 91-37350T | MANDREL |
| 62 | 91-817070 | HOLDING TOOL, Driveshaft |
| 63 | 91-58222A1 | DIAL INDICATOR TOOL |
| 64 | 91-85716 | PULLER TOOL |
| 65 | 91-83155 | ADAPTER KIT, Dial Indicator |
| 66 | 91-83165T | PULLER ASSEMBLY |
| 67 | 91-856875A1 | INSTALLATION TOOL, Bearing |
| 68 | 91-817057A02 | BACKLASH INDICATOR TOOL |
| 69 | 91-817058A1 | DRIVER TOOL, Bearing |
| 70 | 91-877840A1 | HOLDING TOOL, Driveshaft |
▶TRANSOM BRACKET (33 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3418-822866T04 | BRACKET ASSEMBLY, Transom Comment: (PORT) |
| 2 | 22-8M0169588 | FITTING, Grease |
| 3 | 17-99604 | PIN, Groove |
| 4 | 3418-822865T05 | BRACKET, Transom Comment: (STARBOARD) |
| 5 | 893704T01 | LEVER ASSEMBLY, Tilt Lock |
| 6 | 24-99622 | SPRING |
| 7 | 23-65830 | NYLINER |
| 8 | 24-812708 | SPRING |
| 9 | 812709 | KNOB |
| 10 | 17-99615 | PIN, Groove |
| 11 | 12-19619 | WASHER |
| 12 | 18486F5 | BRACKET, Anchor |
| 13 | 97-818298Q1 | ANODE KIT |
| 14 | 10-8M0204707 | SCREW, (M6 x 25) |
| 15 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 16 | 10-4000354 | SCREW, (M8 x 30) Comment: (30 MM) |
| 17 | 10-4000355 | SCREW, (M8 x 35) Comment: (35 MM) |
| 18 | 13-400257 | LOCKWASHER, (M8) |
| 19 | 11-401388 | NUT, (M8) Stainless Steel |
| 20 | 8M0041938 | TILT TUBE |
| 21 | 11-858869 | NUT, (.875-14) |
| 22 | 19624A1 | SEAL KIT Comment: (NON-HANDLE) |
| 23 | 25-29619 | O-RING, (.583 x .103) Comment: (NON-HANDLE) |
| 24 | 23-78861 | SPACER Comment: (NON-HANDLE) |
| 25 | 54-22740 | CLIP |
| 26 | 8M0084613 | C WASHER |
| 27 | 10-878609 | SCREW, (#10-16 x .600) |
| 28 | 10-814259 | SCREW, (.500-20 x 4.00) |
| 29 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 30 | 11-82671117 | NUT, (.500-20) |
| 31 | 10-4009040 | SCREW, (M10 x 40) Stainless Steel |
| 32 | 12-4002319 | WASHER |
| 33 | 11-40140 | NUT, (M10) |
▶TRIM SWITCH KIT (8 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 87-18286A18 | SWITCH KIT, Trim (10.00 Feet) |
| 1 | 18861 | RETAINER |
| 2 | 814820 | ADAPTOR |
| 3 | NSS | NOT SOLD SEPARATE |
| 4 | 88-8M0207796 | FUSE, 20 Ampere |
| 5 | 84-95084A2 | CABLE ASSEMBLY |
| 6 | 84-11149A2 | CABLE ASSEMBLY, (6.00 Inches) |
| 7 | 10-813523 | SCREW, (#10-16 x 2.25) |
▶Top Cowl (16 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 4019-825239T4 | TOP COWL ASSEMBLY Comment: (SILVER) |
| 2 | NSS | NOT SOLD SEPARATE |
| 3 | 826291F1 | LATCH Comment: (SILVER) |
| 4 | 10-8231871 | SCREW, (M4 x 14.5) |
| 5 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 6 | 11-8237515 | NUT, (M4) |
| 7 | 8M0153618 | SEAL |
| 8 | 825243A03 | SOUND BLANKET KIT |
| 9 | NSS | NOT SOLD SEPARATE |
| 10 | 893763 | BRACKET ASSEMBLY, Latch Roller |
| 11 | 10-4006731 | SCREW, (M6 x 16) |
| 12 | 8M0038412 | BRACKET |
| 13 | 10-8231871 | SCREW, (M4 x 14.5) |
| 14 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 15 | 11-8237515 | NUT, (M4) |
| 16 | 47341A11 | ROPE AND HANDLE KIT, Manual Starting |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 60 (4-STROKE)(4 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
- Choosing a selection results in a full page refresh.