Images
Product
Price
Qty
Options
$71.50
$16.99
Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
Mercury 350 (1812754 THRU 1960826) Parts & Diagrams
🔎 Mercury 350 Reference Library — Exploded parts diagrams (17 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 350 is a 4-Stroke, V10 64-degree, Naturally Aspirated outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, V10 64-degree, Naturally Aspirated |
| Horsepower | 350 HP |
| Displacement | 5700 cc (5.7L / 349 CID) |
| Bore x Stroke | 92 mm x 86 mm (3.6 in. x 3.4 in.) |
| Spark Plug (Type & Gap) | NGK ILFR6G-E |
| Engine Oil Capacity | 7.0 L (7.4 US qt) with filter |
| Recommended Engine Oil | Mercury SAE 25W-40 Marine Engine Oil |
| Gear Case Oil Capacity | 970 mL (32.8 oz) |
| Idle Speed (in gear) | 650–700 RPM (in gear) |
| Full Throttle RPM Range | 5800-6400 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 350:
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 350.
▶BOTTOM COWL ASSEMBLY (28 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 33474A1 | STOP SWITCH ASSEMBLY |
| 1 | 2121-2510A2 | BOTTOM COWL ASSEMBLY |
| 2 | 29206 | COVER, PLUG - BOTTOM COWL HARNESS HOLE |
| 3 | 10-46270 | SCREW, PLUG COVER TO BOTTOM COWL |
| 4 | 11-28656 | NUT, PLUG COVER TO BOTTOM COWL SCREW |
| 5 | 27-628601 | GASKET, POWERHEAD TO BOTTOM COWL |
| 6 | 33896 | MOULDING, TRIM - BOTTOM COWL |
| 7 | 10-29226 | SCREW, DECORATIVE - MOULDING TO BOTTOM COWL |
| 8 | 13-26995 | LOCKWASHER, MOULDING FASTENING CREW |
| 9 | 11-26419 | NUT, MOULDING FASTENING SCREW |
| 10 | 33946 | BRACKET, LOCK KNOB - COWL FRONT COVER |
| 11 | 10-20653 | SCREW, BRACKET TO BOTTOM COWL (1") |
| 12 | 10-22956 | SCREW, BRACKET TO BOTTOM COWL (7/8") |
| 13 | 12-27985 | WASHER, BRACKET TO BOTTOM COWL SCREW |
| 14 | 11-24652 | NUT, BRACKET TO BOTTOM COWL SCREW |
| 15 | 22-996642 | ELBOW, EXHAUST COVER - TELL TALE TUBE |
| 16 | 32-8M0108355 | TUBE, TELL TALE _ EXHAUST COVER TO BOTTOM COWL (14 1/2") |
| 17 | 22-291112 | CONNECTOR, BOTTOM COWL - TELL TALE TUBE |
| 18 | 33474 | HARNESS, STOP SWITCH |
| 19 | 12-30856 | WASHER, SEALING - STOP SWITCH |
| 20 | 30859 | INSULATOR, SLEEVE - INNER SWITCH TERMINALS |
| 21 | 24-30858A1 | SPRING AND CONTRACT ASSEMBLY |
| 22 | 38950A1 | COVER, STOP SWITCH |
| 23 | 13-21972 | LOCKWASHER, STOP SWITCH CONNECTOR |
| 24 | 11-21971 | NUT, STOP SWITCH CONNECTOR TO BOTTOM COWL |
| 25 | 54-26550 | CLIP, STOP SWITCH LEADS |
| 26 | 10-62568 | SCREW, STOP SWITCH LEADS CLIP TO LOCK KNOB BRACKET (3/8") |
| 27 | 8M0084613 | "D" WASHER, STOP SWITCH LEADS CLIP SCREW |
▶CARBURETOR ASSEMBLY (37 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 1395-92621 | REPAIR PARTS KIT |
| 1 | 1335-2472 | CARBURETOR ASSEMBLY, COMPLETE (KC-8A) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 3 | 17-20853 | PIN, FLOAT LEVER PINION |
| 4 | 1399-102 | LEVER, FLOAT (LOWER) |
| 5 | 1399-101 | LEVER, FLOAT (UPPER) |
| 6 | 1395-92581 | INLET NEEDLE, SEAT AND GASKET |
| 7 | 27-25033 | GASKET, INLET SEAT |
| 8 | 1399-99 | GASKET, FLOAT BOWL COVER |
| 9 | 1399-1133 | COVER, FLOAT BOWL |
| 10 | 10-22625 | SCREW, FLOAT BOWL COVER (SHORT) |
| 11 | 10-25850 | SCREW, FLOAT BOWL COVER (LONG) |
| 12 | 27-25851 | GASLET, STRAINER COVER (LARGE) |
| 13 | 1399-3938 | SCREEN, FILTER |
| 14 | 27-25849 | GASKET, STRAINER COVER (SMALL) |
| 15 | 1399-2371 | COVER, STRAINER |
| 16 | 27-25848 | GASKET, STRAINER COVER SCREW |
| 17 | 10-25822 | SCREW, STRAINER COVER |
| 18 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 19 | 8146791 | LEVER, THROTTLE STOP |
| 20 | 1399-2012 | SHAFT, THROTTLE |
| 21 | 1399-2558 | TUBE, IDLE |
| 22 | 27-23180 | GASKET, IDLE TUBE |
| 23 | 10-23035 | SCREW AND LOCKWASHER, THROTTLE SHUTTER |
| 24 | 1399-2014 | SHUTTER, THROTTLE |
| 25 | 19-32299 | WELCH PLUG, BODY CHANNEL |
| 26 | 24-26890 | SPRING, THROTTLE SHAFT RETURN |
| 27 | 1399-2535 | MAIN NOZZLE |
| 28 | 10-28846 | SCREW, PLUG - MAIN NOZZLE |
| 29 | 1399-1465 | JET, MAIN FUEL (.065) |
| 30 | 27-28409 | GASKET, MAIN FUEL JET |
| 31 | 27-28406 | GASKET, MAIN FUEL JET |
| 32 | 10-28405 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 33 | 1399-1713 | SCREW, IDLE ADJUSTMENT |
| 34 | 24-27160 | SPRING, IDLE ADJUSTMENT SCREW |
| 35 | 27-31402 | GASKET, CARBURETOR FLANGE |
| 36 | 11-29250 | NUT, CARBURETOR MOUNTING STUDS |
▶CARBURETOR LINKAGE (17 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 90242A1 | KNOB, CHOKE ROD |
| 2 | 25-20116 | GROMMET, CHOKE ROD |
| 3 | 33954 | "S" LINK, CHOKE ROD TO CHOKE KNOB |
| 4 | 10-30097 | SCREW, "S" LINK TO CHOKE KNOB |
| 5 | 34000 | ROD, CHOKE |
| 6 | 11-20110 | NUT, CHOKE ROD TO "S" LINK |
| 7 | 17-25391 | RIVET, CHOKE ROD TO CHOKE SHUTTER |
| 8 | 47804 | SHUTTER, CHOKE - CARBURETOR |
| 9 | 16-30172 | STUD, CARBURETOR - CHOKE SHUTTER PIVOT |
| 10 | 12-30164 | WASHER, CHOKE SHUTTER CARBURETOR STUD |
| 11 | 11-20110 | NUT, CHOKE SHUTTER TO CARBURETOR STUD |
| 12 | 1335-2472 | CARBURETOR ASSEMBLY, COMPLETE |
| 13 | 33900A1 | THROTTLE LEVER ASSEMBLY |
| 14 | 10-29239 | SCREW, THROTTLE LEVER TO CARBURETOR |
| 15 | 27711 | RETAINER, CHOKE ROD SPRING |
| 16 | 10-28713 | SCREW, RETAINER TO CARBURETOR |
| 17 | 24-28965 | SPRING, TENSION - CHOKE ROD |
▶CLAMP AND SWIVEL BRACKET ASSEMBLY (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1427-1810A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 22477A4 | THUMB SCREW ASSEMBLY |
| 3 | 12-26227 | WASHER, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | SHIM, CLAMP BRACKET TO SWIVEL BRACKET (.010) |
| 6 | 11-858869 | NUT, TILT TUBE |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 17-33985A1 | SWIVEL PIN AND TOP YOKE ASSEMBLY |
| 9 | 30711 | BUMPER, TOP YOKE |
| 10 | 10-33986 | SCREW, UPPER MOUNT TO SWIVEL PIN |
| 11 | 33840 | BRACKET, STEERING ARM - SWIVEL PIN |
| 12 | 62297 | BUMPER, STEERING ARM BRACKET |
| 13 | 10-69028 | SCREW, STEERING ARM BRACKET TO SWIVEL PIN |
| 14 | 33963 | BRACKET, REMOTE STEERING |
| 15 | 10-37612 | SCREW, REMOTE BRACKET TO ARM BRACKET (1 1/4") |
| 16 | 33969 | PLATE, FRICTION - CO-PILOT (SWIVEL BRACKET) |
| 17 | 10-69069 | SCREW, FRICTION PLATE TO SWIVEL PIN |
| 18 | 38-56267 | SERIAL PLATE |
| 19 | 10-25612 | SCREW, DRIVE - SERIAL PLATE TO SWIVEL BRACKET |
| 20 | 1455-2693A3 | SWIVEL BRACKET ASSEMBLY |
| 21 | 26-32911 | OIL SEAL, SWIVEL BRACKET |
| 22 | 22-69059 | FITTING, PREASE - SWIVEL BRACKET |
| 23 | 19-77633Q | LUBRICAP, SWIVEL BRACKET REASE FITTING |
| 24 | 77416T1 | YOKE, BOTTOM |
| 25 | 12-26837 | WASHER, SWIVEL PIN TO BOTTOM YORK (.065) |
| 26 | 11-71956 | NUT, RETAINING - SWIVEL PIN |
| 27 | 20215 | LEVER, TILT STOP - STARBOARD SIDE |
| 28 | 26864 | LEVER, TILT STOP - PORT SIDE |
| 29 | 10-20217 | SCREW, ANCHOR - TILT STOP LEVER |
| 30 | 23-20216 | SPACER, TILT STOP LEVER |
| 31 | 10-29237 | SCREW, RETAINING - TILT STOP LEVER |
| 32 | 15-37711 | SHIM, RETAINING SCREW - PORT SIDE |
| 33 | 13-20846 | WASHER, WAVE - RETAINING SCREW - STARBOARD SIDE |
| 34 | 11-24652 | NUT, ANCHOR AND RETAINING SCREW |
| 35 | 10-26483 | BOLT, CLAMP BRACKET TO BOAT TRANSOM |
| 36 | 12-67981 | WASHER, CLUMP BRACKET BOLT |
| 37 | 11-8M0204646 | NUT, CLAMP BRACKET BOLT |
| 38 | 26903A2 | REVERSE LOCK ASSEMBLY |
| 39 | 56349 | SHAFT, REVERSE LOCK TO SWIVEL BRACKET |
| 40 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 41 | 24-29821 | SPRING, REVERSE LOCK TENSION |
| 42 | 17-25598 | ROLL PIN, REVERSE LOCK SPRING ATTACHING |
| 43 | 23026 | DISC, FRICTION _ SWIVEL BRACKET |
| 44 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 45 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 46 | 16-59625 | STUD, CLAMP BRACKET |
| 47 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 48 | 11-22053 | NUT, CLAMP BRACKET STUD |
▶COWLING AND FRONT COVER (20 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 92-86166Q1 | GLUE, ADHESIVE - BLANKET FASTENING |
| 1 | 2102-2191A3 | COWL FRONT COVER ASSEMBLY |
| 2 | 56848 | KNOB, COWL FRONT COVER FASTENING |
| 3 | 12-26702 | WASHER, COVER FASTEING KNOB (NYLON) |
| 4 | 12-26825 | WASHER, COVER FASTENING KNOB (STEEL) |
| 5 | 24-31353 | SPRING, TENSION - FASTENING KNOB |
| 6 | 17-29077 | PIN, ROLL - TENSION SPRING TO KNOB |
| 7 | 34242 | BLANKET, SOUND ABSORBING - COWL FRONT COVER |
| 8 | 37-37834 | DECAL, COWL FRONT COVER |
| 9 | 37-37835 | DECAL, COWL FRONT COVER - "MERC 350" |
| 10 | 2122-2512A2 | WRAP AROUND COWL ASSEMBLY |
| 11 | 21060 | HANDLE, COWL LATCH |
| 12 | 53-21058 | "E" RING, COWL LATCH HINGE PIN |
| 13 | 17-21057 | PIN, HINGE - COWL LATCH HANDLE |
| 14 | 25690 | SWIVEL, COWL LATCH |
| 15 | 25691 | HOOK, COWL LATCH FASTENING |
| 16 | 39606 | BLANKET, SOUND ABSORBING - WRAP AROUND COWL |
| 17 | 37-37791 | DECAL, WRAP AROUND COWL - STARBOARD |
| 18 | 37-37790 | DECAL, WRAP AROUND COWL - PORT |
| 19 | 37-37865 | DECAL, WRAP AROUND COWL - REAR |
▶CRANKSHAFT, PISTON AND CONNECTING ROD ASSEMBLY (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 39-33945 | RING, PISTON (.015 OVERSIZE) |
| 1 | 28-45554 | KEY, FLYWHEEL |
| 2 | 422-2186 | CRANKSHAFT |
| 3 | 533-2761A3 | MAIN BEARING ASSEMBLY, VALVE TYPE |
| 4 | 17-20032 | DOWEL PINE, MAIN BEARING |
| 5 | 10-25313 | SCREW, MAIN BEARING CLAMPING |
| 6 | 11-29469 | NUT, MAIN BEARING CLAMPING SCREW |
| 7 | 17-20032 | DOWEL PIN, MAIN BEARING TO CYLINDER BLOCK |
| 8 | 34-32203A1 | REED SET, MAIN BEARING (MATCHED) |
| 9 | 34-64632 | REED STOP, MAIN BEARING REED VALVES |
| 10 | 10-77280 | SCREW, REED STOP MOUNTING |
| 11 | 11-29469 | NUT, REED STOP MOUNTING SCREW |
| 12 | 611-1885A4 | CONNECTING ROD ASSEMBLY Comment: SERIAL 01898816-09999999 |
| 13 | 10-45379 | SCREW, CONNECTING ROD SCREW Comment: SERIAL 01898816-09999999 |
| 14 | 11-20061 | NUT, CONNECTING ROD SCREW Comment: SERIAL 01898816-09999999 |
| 15 | 29-47897 | BEARING, NEEDLE - CRANKPIN Comment: SERIAL 01898816-09999999 |
| 16 | 29-39656 | BEARING, NEEDLE - PISTON PIN Comment: SERIAL 01898816-09999999 |
| 17 | 12-29681 | WASHER, NEEDLE BEARING RETAINING Comment: SERIAL 01898816-09999999 |
| 18 | 732-2735A2 | PISTON AND PISTON PIN ASSEMBLY |
| 19 | 40-32118 | LOCK RING, PISTON PIN |
| 20 | 39-32921 | RING, PISTON |
▶CYLINDER BLOCK AND CRANKCASE ASSEMBLY (56 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1130-2177A2 | END CAP ASSEMBLY, UPPER |
| 2 | 30-63742T | BALL BEARING, UPPER END CAP |
| 3 | 25-31305 | "O" RING, UPPER END CAP |
| 4 | 31-33958 | BEARING, ROLLER - UPPER END CAP |
| 5 | 26-33995 | OIL SEAL, UPPER END CAP |
| 6 | 10-29198 | SCREW, UPPER END CAP MOUNTING |
| 7 | 15-33903A1 | SHIM, UPPER END CAP TO CRANKCASE AND BLOCK |
| 8 | 33899 | CLAMP, HOLD DOWN RING - STATOR PLATE |
| 9 | 10-32228 | SCREW, HOLD DOWN RING CLAMP TO UPPER END CAP |
| 10 | 24-27087 | SPRING, HOLD DOWN RING CLAMP SCREW |
| 11 | 838-2504A2 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 12 | 23-26348 | BUSHING, CRANKCASE |
| 13 | 16-64936 | STUD, CARBURETOR MOUNTING (1 3/16") |
| 14 | 16-33111 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (1 9/16") |
| 15 | 17-23784 | DOWEL PIN, CRANKCASE TO CYLINDER BLOCK |
| 16 | 17-20032 | DOWEL PIN, CYLINDER BLOCK TO MAIN BEARING |
| 17 | 16-8M0034463 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (3 7/16") |
| 18 | 16-29989 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (1 15/16") |
| 19 | 16-34378 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (2 15/16") |
| 20 | 22-328022 | PLUG, PIPE - WATER PRESSURE HOLE |
| 21 | 33758 | COVER, TRANSFER PORT |
| 22 | 27-33955 | GASKET, TRANSFER PORT COVER |
| 23 | 10-20540 | SCREW, TRANSFER PORT COVER MOUNTING |
| 24 | 10-78841 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 1/2") |
| 25 | 10-22039 | SCREW, CRANKCASE TO CYLINDER BLOCK (2 3/4") |
| 26 | 10-26066 | SCREW, CRANCASE TO CYLINDER BLOCK (1 1/4") |
| 27 | 11-29250 | NUT, CRANKCASE FASTENING SCREW |
| 28 | 10-98261 | SCREW, MAIN BEARING LOCKING |
| 29 | 14-20091 | TAB WASHER, BEARING LOCKING |
| 30 | 15-20085A1 | SHIM, LOWER END CAP TO CRANKCASE AND BLOCK |
| 31 | 1126-2187A1 | END CAP ASSEMBLY, LOWER |
| 32 | 21-28481A1 | CHECK VALVE ASSEMBLY, LOWER AND CAP |
| 33 | 26-29478 | OIL SEAL, LOWER |
| 34 | 26-41953 | OIL SEAL, UPPER |
| 35 | 30-63742T | BALL BEARING, LOWER AND CAP |
| 36 | 25-20081 | "O" RING, LOWER END CAP |
| 37 | 10-30225 | SCREW, LOWER END CAP MOUNTING |
| 38 | 10-21365 | SCREW, IDLE STOP - CRANKCASE |
| 39 | 11-20890 | NUT, IDLE STOP SCREW |
| 40 | 26852 | CAP, NYLON - IDLE STOP SCREW |
| 41 | 27-37949 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 42 | 37930 | PLATE, BAFFLE - EXHAUSTING MANIFOLD |
| 43 | 27-37956 | GASKET, BAFFLE PLATE TO EXHAUST COVER |
| 44 | 37936 | COVER, EXHAUST MANIFOLD |
| 45 | 10-28782 | SCREW, MANIFOLD COVER TO CYLINDER BLOCK |
| 46 | 10-21365 | SCREW, SPARK ADVANCE - EXHAUST COVER |
| 47 | 11-20890 | NUT, SPARK ADVANCE SCREW |
| 48 | 26852 | CAP, NYLON - SPARK ADVANCE SCREW |
| 49 | 30212 | TERMINAL BLOCK, EXHAUST MANIFOLD COVER |
| 50 | 10-72169 | SCREW, TERMINAL BLOCK TO EXHAUST MANIFOLD COVER |
| 51 | 10-62568 | SCREW, HARNESS LEADS TO TERMINAL BLOCK |
| 52 | 1015-2175A1 | CYLINDER BLOCK COVER ASSEMBLY |
| 53 | 23-26348 | BUSHING, CYLINDER BLOCK COVER |
| 54 | 27-33951 | GASKET, CYLINDER BLOCK COVER |
| 55 | 10-20653 | SCREW, CYLINDER BLOCK COVER MOUNTING |
| 56 | 11-8M0207775 | NUT, COVER MOUNTING SCREW Comment: SERIAL 01898816-09999999 |
▶DRIVE SHAFT HOUSING ASSEMBLY (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1554-2506A2 | DRIVE SHAFT HOUSING ASSEMBLY |
| 2 | 16-8M0022145 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (1 3/4") |
| 3 | 16-57935 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (3") |
| 4 | 32-37727 | TUBE, WATER INLET |
| 5 | 26-38452 | SEAL, WATER INLET TUPE Comment: SERIAL 01835754-09999999 |
| 6 | 12-38453 | WASHER, WATER TUBE SCREW Comment: SERIAL 01835754-09999999 |
| 7 | 38500 | RETAINER - WATER TUBE SEAL Comment: SERIAL 01835754-09999999 |
| 8 | 10-69069 | SCREW, WATER TUBE TO BOTTOM COWL Comment: SERIAL 01835754-09999999 |
| 9 | 695431 | TUBE, EXHAUST |
| 10 | 38109 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 11 | 10-37571 | SCREW, TRIM COVER TO DRIVE SHAFT HOUSING |
| 12 | 37-37837 | DECAL, TRIM COVER - STARBOARD |
| 13 | 37-37836 | DECAL, TRIM COVER - PORT |
| 14 | 27-385011 | GASLET, DRIVE SHAFT HOUSING TO BOTTOM COWL |
| 15 | 11-862902 | NUT, POWERHEAD STUDS |
| 16 | 19-32298 | PLUG, PLASTIC - WATER PICK-UP SCREW HOLE |
| 17 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 18 | 18-25191 | COTTER PIN, PUSH ROD TO REVERSE LOCK |
| 19 | 32102 | ROD, PUS - REVERSE LOCK |
| 20 | 24-25122 | SPRING, TENSION - PUSH ROD |
| 21 | 17-24887 | PIN, REVERSE LOCK LEVER |
| 22 | 52920 | LEVER, REVERSE LOCK |
| 23 | 25305 | CAP, RUBBER - UPPER MOUNT BOLT NUT |
| 24 | 11-23161 | NUT, UPPER MOUNT BOLT |
| 25 | 12-30519 | WASHER, UPPER MOUNT BOLT (3/8 ID) |
| 26 | 12-30521 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 27 | 12-30520 | WASHER, UPPER MOUNT BOLT (37/64 ID) |
| 28 | 79680A1 | COVER, UPPER MOUNT - OUTSIDE HALF |
| 29 | 79680A1 | COVER, UPPER MOUNT - INSIDE HALF |
| 30 | 75301 | MOUNT, RUBBER - UPPER |
| 31 | 24929 | PACKING, "U" CUP - UPPER MOUNT COVERS |
| 32 | 10-37941 | SCREW, UPPER MOUNT COVER - REAR (1 3/4") |
| 33 | 10-28772 | SCREW, SUPPER MOUNT COVER - FRONT (1 1/2") |
| 34 | 11-35888 | NUT, UPPER MOUNT COVER FASTENING SCREW |
| 35 | 25067 | BUMPER, RUPPER - LOWER MOUNT SCREW |
| 36 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 37 | 12-28051 | WASHER, LOWER MOUNT SCREW |
| 38 | 12-28053 | WASHER, RUBBER - LOWER MOUNT SCREW |
| 39 | 75302T1 | MOUNT, RUBBER - LOWER |
| 40 | 12-30119 | WASHER, LOWER MOUNT SCREW (1/8") |
| 41 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 42 | 22-390721 | PLUG, GREASE - REVERSE LOCK HOLE |
| 43 | 69592F1 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 44 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 45 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING |
| 46 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 47 | 35474T | COVER, LOWER MOUNT CLAMP |
| 48 | 10-29722 | SCREW, COVER TO LOWER CLAMP |
▶FLYWHEEL ASSEMBLY AND THROTTLE CONTROL LINKAGE (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-8M0214915 | NUT, FLYWHEEL |
| 2 | 12-36281 | WASHER, FLYWHEEL NUT |
| 3 | 25-37340 | "O" RING, FLYWHEEL HUB |
| 4 | 28-45554 | KEY, FLYWHEEL DRIVE |
| 5 | 218-2241A1 | FLYWHEEL ASSEMBLY, COMPLETE |
| 6 | 10-35562 | SCREW< FLEXIBLE PLATE TO FLYWHEEL |
| 7 | 50-33000A1 | RATCHET ASSEMBLY, FLYWHEEL |
| 8 | 10-32417 | SCREW, RATCHET TO FLYWHEEL |
| 9 | 10-34290 | SCREW, RACHET TO FLYWHEEL |
| 10 | 13-26992 | LOCKWASHER, RATCHET TO FLYWHEEL SCREW |
| 11 | 398-2574A3 | STATOR PLATE ASSEMBLY, COMPLETE (SEE NOTE BELOW) |
| 12 | 36442A1 | SHIELD ASSEMBLY, STATOR PLATE |
| 13 | 10-45742 | SCREW, SHIELD TO STATOR PLATE |
| 14 | 13-26996 | LOCKWASHER, SHIELD FASTENING SCREW |
| 15 | 33904 | RING, HOLD DOWN - STATOR PLATE |
| 16 | 10-35400 | SCREW, HOLD DOWN RING TO STATOR PLATE |
| 17 | 15-33910015 | SHIM, STATOR PLATE TO UPPER END CAP (.015) |
| 18 | 33974 | BRACKET, THROTTLE CAM |
| 19 | 10-29722 | SCREW, THROTTLE CAM BRACKET TO STATOR PLATE |
| 20 | 34068 | CAM, ADJUSTMENT - THROTTLE |
| 21 | 10-31903 | SCREW, ADJUSTINGG CAM TO BRACKET |
| 22 | 33970 | ROD, THROTTLE CONTROL |
| 23 | 28232 | TOGGLE BOLT, THROTTLE CONTROL ROD |
| 24 | 18-26811 | COTTER PIN, THROTTLE CONTROL ROD |
| 25 | 33973 | SWIVEL, THROTTLE CONTROL ROD TO ACTUATING LEVER |
| 26 | 33842 | LEVER, THROTTLE ACTUATING (UPPER) |
| 27 | 33902 | ROD, VERTICAL |
| 28 | 12-26825 | WASHER, VERTICAL ROD |
| 29 | 23-22981 | BUSHING, NYLON - VERTICAL ROD |
| 30 | 17-25870 | PIN, ROLL - VERTICAL ROD |
| 31 | 33833 | LEVER, THROTTLE ACTUATING (LOWER) |
| 32 | 10-25781 | SCREW, SET - THROTTLE ACTUATING LEVERS |
▶FUEL PUMP ASSEMBLY (23 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 30269A2 | FUEL PUMP ASSEMBLY |
| 2 | 27-23005 | GASKET, CHECK VALVE TO HOUSING |
| 3 | 21-8M0082362 | VALVE, CHECK |
| 4 | 23004 | RETAINER, CHECK VALVE |
| 5 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 6 | 27-24863 | GASKET, FUEL PUMP |
| 7 | 23014 | DIAPHRAGM, FUEL PUMP |
| 8 | 30275 | COVER, FUEL PUMP |
| 9 | 27-30276 | GASKET, FUEL PUMP COVER |
| 10 | 10-30274 | SCREW, FUEL PUMP MOUNTING (1 3/4") |
| 11 | 10-29878 | SCREW, FUEL PUMP MOUNTING (1 1/2") |
| 12 | 22-22949 | CONNECTOR, PUMP INLET TO FUEL LINE |
| 13 | 22-22946 | SLEEVE, RUBBER - CONNECTOR |
| 14 | 22-22948 | NUT, CONNECTOR TO FUEL LINE |
| 15 | 32-34066 | FUEL LINE, FUEL PUMP TTO ADAPTOR |
| 16 | 22833 | ADAPTOR, CHECK UNIT (FUEL PUMP) |
| 17 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 18 | 25-16524 | "O" RING, ADAPTOR STEM |
| 19 | 24-23067T | SPRING, ADAPTOR STEM |
| 20 | 30188 | CUP WASHER, ADAPTOR |
| 21 | 10-56500 | SCREW, ADAPTOR TO BOTTOM COWL |
| 22 | 11-24652 | NUT, ADAPTOR SCREW |
| 23 | 32-34243 | FUEL LINE, FUEL PUMP TO CARBURETOR (7 1/8") |
▶GEAR HOUSING ASSEMBLY, COMPLETE (PAGE 1) (46 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1626-2470A6 | GEAR HOUSING ASSEMBLY, COMPLETE (STANDARD)-SEE NOTE BELOW |
| 1 | 1626-2470A16 | GEAR HOUSING ASSEMBLY |
| 2 | 16-57934 | STUD, WATER PUMP BODY AND BASE TO GEAR HOUSING |
| 3 | 16-32017 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING |
| 4 | 31-62091T | BEARING, ROLLER - DRIVE SHAFT |
| 5 | 92815 | PLATE, SUPPORT - EXHAUST TUBE |
| 6 | 37721001 | SEAL, EXHAUST TUBE |
| 7 | 43-33843 | GEAR, PINION - DRIVE SHAFT |
| 8 | 14-29163 | TAB WASHER, PINION GEAR FASTENING SCREW |
| 9 | 10-20925 | SCREW, PINION GEAR TO DRIVE SHAFT |
| 10 | 56622A1 | SHAFT, SHIFT - LOWER |
| 11 | 53-29641 | CLIP, RETAINING - SHIFT SHAFT |
| 12 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 13 | 23-46284A1 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 14 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING |
| 15 | 52918 | CAM, LOWER - REVERSE LOCKING |
| 16 | 52919 | CAM, UPPER - REVERSE LOCKING |
| 17 | 45-38466 | DRIVE SHAFT (STANDARD) |
| 18 | 15-20929A1 | SHIM, BALL BEARING TO GEAR HOUSING |
| 19 | 30-72961 | BEARING, BALL - DRIVE SHAFT |
| 20 | 53-29116 | RING, SNAP - BALL BEARING RETAINING |
| 21 | 15-20929A1 | SHIM, BALL BEARING TO WATER PUMP BASE |
| 22 | 27-32771 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 23 | 25-26855 | "O" RING, WATER PUMP BASE |
| 24 | 46-39531A1 | WATER PUMPB BASE ASSEMBLY |
| 25 | 26-90562 | OIL SEAL, WATER PUMP BASE |
| 26 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 27 | 27-19553 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 28 | 32768 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 29 | 27-19551 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 30 | 47-89983T | IMPELLER, WATER PUMP |
| 31 | 28-8M0032837 | PIN, IMPELLER DRIVE |
| 32 | 46-60366Q1 | WATER PUMP BODY ASSEMBLY |
| 33 | 32001 | INSERT, WATER PUMP BODY |
| 34 | 26-32121 | OIL SEAL, WATER PUMP BODY |
| 35 | 13-26992 | LOCKWASHER, WATER PUMP BODY AND BASE STUDS |
| 36 | 11-29598 | NUT, WATER PUMP BODY AND BASE FASTENING STUDS |
| 37 | 26-38452 | SEAL, WATER PUMP BODY TO WATER INLET TUBE |
| 38 | 12-38453 | WASHER, NYLON _ WATER PUMP BODY |
| 39 | 25-20273 | RING, RUBBER _ CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 40 | 25-29619 | "O" RING, UPPER - DRIVE SHAFT |
| 41 | 10-29608 | SCREW, REAR HOUSING FLUSHING HOLE |
| 42 | 27-8M0214916 | GASKET, GEAR HOUSING FLUSHING HOLE SCREW |
| 43 | 26-8M0214917 | SEAL, GEAR HOUSING FLUSHING HOLE |
| 44 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 45 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
▶GEAR HOUSING ASSEMBLY, COMPLETE (PAGE 2) (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1626-2470A6 | GEAR HOUSING ASSEMLBY, COMPLETE (STANDARD) - SEE NOTE BELOW |
| -- | 43-33844A4 | REVERSE GEAR ASSEMBLY, COMPLETE |
| 1 | 1626-2470A16 | GEAR HOUSING ASSEMBLY(SEE PAGE 26 FOR PARTS BREAKDOWN) |
| 46 | 760394 | CAM, SHIFT |
| 47 | 20930 | FOLLOWER, CAM |
| 48 | 20843 | SLIDE, CROSS PIN |
| 49 | 24-20254 | SPRING, COMPRESSION - CAM FOLLOWER |
| 50 | 15-31154A1 | SHIM, BEARING CUP TO GEAR HOUSING |
| 51 | 43-33844A4 | FORWARD GEAR ASSEMBLY |
| 52 | 31-20249 | BEARING, ROLLER - FORWARD GEAR |
| 53 | 31-31215A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 54 | 31-31216 | CUP, TAPERED ROLLER BEARING |
| 55 | 52-32189 | RATCHET, SLIDING CLUTCH |
| 56 | 17-20841 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 57 | 53-20842 | RING, RETAINING - CROSS PIN |
| 58 | 44-32000 | SHAFT, PROPELLER |
| 59 | 43-33844A4 | REVERSE GEAR ASSEMBLY |
| 60 | 12-32004 | WASHER, TRUST - REVERSE GEAR |
| 61 | 30-20839T | BEARING, BALL - REVERSE GEAR |
| 62 | 15-20927A1 | SHIM, THRUST WASHER TO GEAR HOUSING |
| 63 | 25-31986 | "O" RING, BEARING CARRIER |
| 64 | 53014T1 | BEARING CARRIER ASSEMBLY Comment: SERIAL 01835754-09999999 |
| 65 | 31-20249 | BEARING, ROLLER - BEARING CARRIER Comment: SERIAL 01835754-09999999 |
| 66 | 26-23517 | OIL SEAL, BEARING CARRIER Comment: SERIAL 01835754-09999999 |
| 67 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 68 | 12-31993 | WASHER, GEAR HOUSING COVER |
| 69 | 11-87763 | COVER, GEAR HOUSING |
| 70 | 12-25251 | WASHER, BACKING - PROPELLER SHAFT (1/8) |
| 71 | 38859A1 | THRUST HUB AND WASHER ASSEMBLY |
| 72 | 12-31992 | WASHER, CUPPED - THRUST HUB |
| 73 | 12-32007 | WASHER< SPLINDER - PROPELLER SHAFT |
| 74 | 11-82671120 | NUT, PROPELLER |
| 75 | 97-31640Q4 | TRIM TAB, GEAR HOUSING |
| 76 | 10-32470 | SCREW, TRIM TAB TO GEAR HOUSING |
| 77 | 11-8M0204653 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING STUD (7/16) |
| 78 | 11-23161 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING STUD (3/8) |
▶MISCELLANEOUS PARTS/ACCESSORIES (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 94-29616 | SHIPPING CARTON (FUEL TANK) |
▶STARTER MOTOR, STARTER SOLENOID AND WIRING HARNESS (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 31041 | CHOKE SOLENOID, TOP COWL |
| 2 | 30050 | DISCONNECT, CHOKE SOLENOID TERMINALS |
| 3 | 28016A1 | GROUND STRAP ASSEMBLY |
| 4 | 10-35194 | SCREW, CHOKE SOLENOID TO TOP COWL (5/8") |
| 5 | 48315A4 | PLUNGER ASSEMBLY, CHOKE SOLENOID |
| 6 | 12-30164 | WASHER, CHOKE SOLENOID LINK |
| 7 | 18-26953 | COTTER PIN, CHOKE SOLENOID LINK FASTENING |
| 8 | 54-22783 | "S" CLIP, CHOKE SOLENOID LEADS TO TOP COWL |
| 9 | 23-30438 | BUSHING, NYLON - CHOKE SBHUTTER |
| 10 | 30212 | TERMINAL BLOCK, CYLINDER BLOCK |
| 11 | 10-72169 | SCREW, TERMINAL BLOCK TO CYLINDER BLOCK |
| 12 | 10-62568 | SCREW, WIRING HARNESS LEADS TO TERMINAL BLOCK |
| 13 | 218-2242A1 | FLYWHEEL ASSEMBLY, COMPLETE |
| 14 | 10-35562 | SCREW, FLEXIBLE PLATE TO FLYWHEEL |
| 15 | 50-33000A1 | RATCHET ASSEMBLY, FLYWHEEL |
| 16 | 10-32417 | SCREW, RATCHET TO FLYWHEEL |
| 17 | 10-34290 | SCREW, RATCHET TO FLYWHEEL |
| 18 | 13-26992 | LOCKWASHER, RATCHET TO FLYWHEEL SCREW |
| 19 | 50-55601A2 | STARTER MOTOR ASSEMBLY Comment: SERIAL 01900116-09999999 |
| 20 | 10-35213 | SCREW, STARTER MOTOR TO CRANKCASE |
| 21 | 26511 | WIRE, STARTER MOTOR TO STARTER SOLENOID |
| 22 | 10-69035 | SCREW, GROUND WIRE TO STARTER MOTOR |
| 23 | 13-26992 | LOCKWASHER, GROUND WIRE FASTENING SCREW |
| 24 | 28016A1 | GROUND STRAP ASS'Y, STARTER SOLENOID AND CYLINDER BLOCK |
| 25 | 32445A1 | SOLENOID, STARTER |
| 26 | 10-29238 | SCREW, STARTER SOLENOID TO STARTER MOTOR |
| 27 | 12-37998 | WASHER, STARTER SOLENOID SCREW |
| 28 | 10,13-26996 | LOCKWASHER, STARTER SOLENOID TERMINAL |
| 29 | 10,11-68219 | NUT, STARTER SOLENOID TERMINAL |
| 30 | 13-8M0204647 | LOCKWASHER, STARTER SOLENOID TERMINAL (5/16) |
| 31 | 11-22053 | NUT, STARTER SOLENOID TERMINAL (5/16) |
| 32 | 11-26062 | NUT, CAP - STARTER SOLENOID TERMINAL - OUTSIDE (5/16) |
| 33 | 34229 | WIRING HARNESS (INTERNAL) |
| 34 | 26079A2 | PLATE, BACKING - WIRING HARNESS |
| 35 | 10-45893 | SCREW, BACKING PLATE TO BOTTOM COWL |
| 36 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 37 | 34228 | SUPPORT, EXTERNAL WIRING HARNESS |
| 38 | 10-35092 | SCREW, SUPPORT TO BOTTOM COWL |
| 39 | 11-24652 | NUT, SUPPORT FASTENING SCREW |
| 40 | 54-22740 | CLIP, WIRING HARNESS LEADS |
▶STATOR PLATE ASSEMBLY (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 398-2574A3 | STATOR PLATE ASSEMBLY, COMPLETE (SEE NOTE BELOW) |
| 1 | 398-2221 | STATOR PLATE AND CORE |
| 2 | 398-2568T1 | COIL ASSEMBLY |
| 3 | 398-2321 | CLIP, COIL RETAINING |
| 4 | 398-2413 | CLIP, COIL RETAINING |
| 5 | 398-2207 | FELT, CAM - BREAKER |
| 6 | 398-732 | CLIP, GROUND WIRE LEAD |
| 7 | 10-21130 | SCREW, GROUND TERMINAL |
| 8 | 398-2203 | CONDENSER ASSEMBLY |
| 9 | 10-38395 | SCREW, CONDENSER FASTENING (1 1/4") |
| 10 | 10-38395 | SCREW, CONDENSER FASTENING (1 1/4") |
| 11 | 13-21134 | LOCKWASHER, CONDENSER FASTENING SCREW |
| 12 | 12-21135 | WASHER, CONDENSER FASTEING SCREW |
| 13 | 54-39844A1 | CLAMB, LEAD WIRE |
| 14 | 12-21135 | WASHER, LEAD WIRE CLAMP SCREW |
| 15 | 13-21134 | LOCKWASHER, LEAD WIRE CLAMP SCREW |
| 16 | 11-21923T | NUT, LEAD WIRE CLAMP SCREW |
| 17 | 11-21825 | NUT, COIL LEAD WIRE CLIP SCREW (SPACER) |
| 18 | 54-24836 | CLIP, NYLON - COIL LEAD WIRE |
| 19 | 8M0084613 | "D" WASHER, COIL LEAD WIRE CLIP |
| 20 | 13-26995 | LOCKWASHER, COIL LEAD WIRE CLIP SCREW |
| 21 | 11-26419 | NUT, COIL LEAD WIRE CLIP SCREW |
| 22 | 398-2202 | BREAKER ASSEMBLY |
| 23 | 10-33988 | SCREW AND LOCKWASHER, BREAKER FASTENING |
| 24 | 12-21135 | WASHER, TERMINAL SCREW |
| 25 | 13-21134 | LOCKWASHER, TERMINAL SCREW |
| 26 | 11-21923T | NUT, TERMINAL SCREW |
| 27 | 398-2206 | GROUND LEAD, STATOR TO TERMINAL BLOCK |
| 28 | 23-30419 | SLEEVE, INSULATION - GROUND LEAD |
| 29 | 84-821945A46 | LEAD WIRE |
| 30 | 84-821945A46 | LEAD WIRE - TOP |
| 31 | 85-63709A1 | PROTECTOR, SPARK PLUG |
| 32 | 20117 | MARKER, "TOP" - LEAD WIRE |
| 33 | 33-813416 | SPARK PLUG, (CHAMPION J6J) |
| 34 | 398-2208 | COVER, DUST - STATOR PLATE |
| 35 | 10-36455 | SCREW, DUST COVER TO STATOR PLATE |
▶THROTTLE AND SHIFT LINKAGE (49 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2121-2510A2 | BOTTOM COWL ASSEMBLY (SEE PAGE 18 FOR PARTS BREAKDOWN) |
| 2 | 20557 | BRACKET, CABLE END ANCHOR |
| 3 | 10-29200 | SCREW, CABLE END ANCHOR BRACKET TO BOTTOM COWL |
| 4 | 21968 | STOP BLOCK, THROTTLE LEVER |
| 5 | 10-28636 | SCREW, STOP BLOCK TO BOTTOM COWL |
| 6 | 12-21967 | WASHER, STOP BLOCK TO BOTTOM COWL SCREW |
| 7 | 33833 | LEVER, THROTTLE ACTUATING - BOTTOM COWL |
| 8 | 27947 | SWIVEL, THROTTLE CONTROL |
| 9 | 33898 | ROD, THROTTLE CONTROL |
| 10 | 11-25168 | NUT, ADJUSTING - THROTTLE CONTROL ROD |
| 11 | 33953 | ROD (SLEEVE), THROTTLE CONTROL ROD TO THROTTLE CONTROL LEVER |
| 12 | 12-20583 | WASHER, THROTTLE CONTROL LEVER |
| 13 | 18-210711 | COTTER PIN, THROTTLE CONTROL LEVER |
| 14 | 33835 | LEVER, THROTTLE CONTROL |
| 15 | 10-29246 | SCREW, THROTTLE CONTROL LEVER TO BOTTOM COWL |
| 16 | 12-38832 | WASHER, THROTTLE CONTROL LEVER FASTENING CREW |
| 17 | 23-33906 | SPACER, THROTTLE CONTROL LEVER FASTENING SCREW |
| 18 | 23-65830 | BUSHING, THROTTLE CONTROL LEVER TO BOTTOM COWL |
| 19 | 12-21273 | WASHER, THROTTLE CONTROL LEVER FASTENING SCREW |
| 20 | 17-30978A1 | PIN ASSEMBLY, CLEVIS YOKE |
| 21 | 17-239281 | ROLL PIN, CLEVIS YOKE PIN |
| 22 | 10-20584 | SCREW, CLEVIS YOKE PIN FASTENING |
| 23 | 13-29402 | WASHER, WAVE - CLEVIS YOKE PIN FASTENING SCREW |
| 24 | 11-8M0204718 | NUT, CLEVIS YOKE PIN FASTENING SCREW |
| 25 | 33901A1 | SHIFT SHAFT ASSEMBLY, UPPER |
| 26 | 24-30621 | SPRING, DETENE - SHIFT SHAFT |
| 27 | 10-98256 | SCREW, DETENT SPRING TO BOTTOM COWL |
| 28 | 12-69057 | WASHER, DETENT SPRING FASTENING SCREW |
| 29 | 11-20013 | NUT, DETENT SPRING FASTENING SCREW |
| 30 | 33837 | ROD, THROTTLE STOP CONTROL |
| 31 | 11-25168 | NUT, ADJUSTING - THROTTLE STOP CONTROL ROD |
| 32 | 33953 | ROD (SLEEVE), THROTTLE STOP CONTROL ROD TO THROTTLE STOP LEV |
| 33 | 12-20583 | WASHER, THROTTLE STOP LEVER |
| 34 | 18-210711 | COTTER PIN, THROTTLE STOP LEVER |
| 35 | 33834 | LEVER, THROTTLE STOP |
| 36 | 10-34438 | SCREW, THROTTLE STOP LEVER TO BOTTOM COWL (2 3/8") |
| 37 | 12-34437 | WASHER, THROTTLE STOP LEVER FASTENING SCREW |
| 38 | 23-34440 | BUSHING, THROTTLE STOP LEVER FASTENING SCREW |
| 39 | 11-29250 | NUT, THROTTLE STOP LEVER FASTENING SCREW |
| 40 | 23-34103 | BUSHING, THROTTLE STOP LEVER FASTENING SCREW |
| 41 | 33841 | LEVER, SHIFT CONTROL |
| 42 | 10-47273 | SCREW, SHIFT CONTROL LEVER TO BOTTOM COWL |
| 43 | 12-8M0042641 | WASHER, SHIFT CONTROL LEVER FASTENING SCREW |
| 44 | 23-29529 | BUSHING, SHIFT CONTROL LEVER FASTENING SCREW |
| 45 | 33953 | ROD (SLEEVE), SHIFT CONTROL END |
| 46 | 11-25168 | NUT, ADJUSTING - SHIFT SHAFT END |
| 47 | 33982 | ROD, LINK - SHIFT SHAFT END |
| 48 | 12-20583 | WASHER, SHIFT CONTROL END ROD |
| 49 | 18-210711 | COTTER PIN, SHIFT CONTROL END ROD |
▶TOP COWL AND STARTER ASSEMBLY (46 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2100-2172A2 | TOP COWL ASSEMBLY |
| 2 | 25-20116 | GROMMET, CHOCK KNOB |
| 3 | 16-20353 | STUD, FRONT AND REAR - TOP COWL TO CYLINDER BLOCK |
| 4 | 12-20028 | WASHER, TOP COWL STUD (1/16") |
| 5 | 12-69057 | WASHER, TOP COWL STUD (3/4"OD) |
| 6 | 12-20583 | WASHER, TOP COWL STUD (1/32") |
| 7 | 11-8267089 | NUT, TOP COWL FASTENING STUD |
| 8 | 20155 | RETAINER, STARTER SPRING |
| 9 | 24-29340T02 | SPRING, STARTER REWIND |
| 10 | 23-28912 | BUSHING, SPRING GUIDE |
| 11 | 50-30994 | SHEAVE ASSEMBLY |
| 12 | 30596 | PAWL, STARTER |
| 13 | 13-36206 | WASHER, WAVE - STARTER PAWL |
| 14 | 23-28919 | BUSHING, NYLON - SHEAVE SHAFT SPACER |
| 15 | 45477A1 | SPACER, SHEAVE SHAFT |
| 16 | 26179 | RETAINER, WAVE WASHER |
| 17 | 12-26180 | WASHER, WAVE WASHER RETAINER |
| 18 | 13-20160 | WASHER, WAVE - RETAINER TENSION |
| 19 | 30595 | PLATE, RETAINER - STARTER PAWL |
| 20 | 45477A1 | SHAFT, SHEAVE |
| 21 | 34735A1 | TRIM MOLDING ASSEMBLY, TOP COWL |
| 22 | 34433 | BRACKET, TRIM MOULDING TENSION |
| 23 | 10-37892 | SCREW, BRACKET AND MOULDING TO TOP COWL |
| 24 | 12-34434 | WASHER, BRACKET AND MOULDING TO TOP COWL SCREW |
| 25 | 11-20110 | NUT , BRACKET AND MOULDING TO TOP COWL SCREW |
| 26 | 50-12066Q10 | STARTER CABLE ASSEMBLY |
| 27 | 28747 | HANDLE, STARTER CABLE |
| 28 | 79470A1 | RETAINER, STARTER CABLE AND HANDLE |
| 29 | 30045 | PLATE, ROPE GUIDE |
| 30 | 10-28642 | SCREW, DRIVER - ROPE GUIDE PLATE TO TOP COWL |
| 31 | 14-20165 | TAB WASHER, SHEAVE SHAFT NUT |
| 32 | 11-20166 | NUT, SHEAVE SHAFT (LEFT HAND THREAD) |
| 33 | 33952 | SCREEN, VENT - TOP COWL |
| 34 | 10-35193 | SCREW, VENT SCREEN TO TOP COWL |
| 35 | 31875 | HANDLE, CHROME - TO COWL |
| 36 | 31003 | HANDLE, INSIDE - TOP COWL |
| 37 | 10-56500 | SCREW, FRONT - HANDLE TO TOP COWL (1 1/4") |
| 38 | 11-8267089 | NUT, FRONT HANDLE FASTENING SCREW |
| 39 | 35496 | PAD, BUMPER - TOP COWL HANDLE |
| 40 | 12-69057 | WASHER, LOWER HANDLE STUD (3/4"OD) |
| 41 | 12-8M0204649 | WASHER, CENTER HANDLE STUD (1/2"OD) |
| 42 | 11-21825 | NUT, INSIDE HANDLE TO CHROME HANDLE STUDS |
| 43 | 10-29199 | SCREW, CENTER - HANDLE TO TOP COWL (1") |
| 44 | 23-29561 | BUSHING, REAR HANDLE STUD |
| 45 | 13-26992 | LOCKWASHER, REAR HANDLE STUD |
| 46 | 11-21825 | NUT, REAR HANDLE STUD |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 350 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
- Choosing a selection results in a full page refresh.