Trim Position Sensor 888590002 – Fits Mercury Verado 200–300HP

Vendor: JLM Marine
Availability: In Stock
Product Type: Sensor
$79.77
$79.77
Subtotal: $79.77

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Trim Position Sensor 888590002 – Fits Mercury Verado 200–300HP

Trim Position Sensor 888590002 – Fits Mercury Verado 200–300HP

$79.77

How to Match This Part

This aftermarket trim position sensor replaces Mercury / Mariner / Quicksilver 888590002 (and the earlier number 888590). It mounts on the Verado swivel-bracket / cradle area and reports outboard trim angle to the engine controls and instrumentation.

Match this part in this order:
1. Number on the sensor you remove — 888590002 or 888590
2. Engine family — Mercury or Mariner Verado inline-six (6-cylinder) four-stroke outboard, 200–300 HP
3. Serial number on the engine ID plate / midsection bracket against the compatibility notes, then compare the two-hole sensor face and corrugated harness with the product images

Four-cylinder Verado and other outboard families use different sender numbers — confirm the stamped OEM number before ordering.

Part Number Cross-Reference

Use these verified Mercury numbers to confirm you have the correct Verado trim position sensor. Brand names and OEM numbers are for identification only.

Type Brand Part Number Notes
OEM Mercury / Mariner / Quicksilver 888590002 Current trim position sensor
OEM Mercury / Mariner 888590 Earlier number; superseded by 888590002

This is an aftermarket part manufactured by JLM Marine. It is not sold as a genuine Mercury Marine, Mariner, or Quicksilver component.

Compatible Engine Models

Confirm your Mercury or Mariner Verado inline-six outboard below. Find the serial number on the engine identification plate / midsection bracket, then use Mercury Parts Diagrams for the mount-cradle sensor callout.

Brand Engine Family Rated HP Serial / Notes
Mercury / Mariner Verado 6-cylinder 4-stroke 200, 225, 250, 275 Covered OEM where-used blocks include 0P409357–2B144122 family ranges and 1B227000 & Up — confirm your serial on the parts diagram
Mercury / Mariner Verado 6-cylinder 4-stroke 300 Covered OEM where-used blocks include 0P520553–2B144122 and 1B517434 & Up — confirm serial before ordering

Always match the number on the sensor you remove. If your Verado uses a different trim sensor PN (for example later Pro Verado black sensors), this listing is not the correct replacement.

Technical Specifications

Specification Value
Part type Trim position sensor
Primary OEM number replaced 888590002
Earlier number covered 888590
Application Mercury / Mariner Verado inline-six outboard trim sensing
Mounting form Rectangular sensor body with two mounting holes
Harness Integrated corrugated wire loom with multi-pin connector (three conductors)
Compatible brands Mercury; Mariner

Installation Guide

  1. 1Turn the ignition off and disconnect the negative battery cable before working on trim wiring or the cradle-mounted sensor.
  2. 2Trim the outboard fully in (full down). Note connector orientation and harness routing on the old sensor before unplugging it.
  3. 3Remove the mounting screws and withdraw the old sensor from the mount cradle. Compare the new unit side by side — two-hole face, harness length, and connector should match.
  4. 4Install the new sensor on the cradle and tighten the fasteners to the torque values in your Mercury / Mariner Verado service manual.
  5. 5Route the corrugated harness clear of moving parts, mate the connector until it latches, and reconnect the battery.
  6. 6Power up and verify smooth trim travel from full in to full out. Perform any trim-position adaptation or calibration required by your engine’s service procedure after sensor replacement.

Note: Professional installation is recommended for Verado trim position sensors.

Troubleshooting & FAQ

How do I confirm this fits my Verado? +

Start with the number on the sensor you remove. If it reads 888590002 or 888590, and your engine is a Mercury or Mariner Verado 6-cylinder four-stroke in the 200–300 HP range, match your serial to the compatibility table and the OEM parts diagram before ordering.

Does this replace both 888590 and 888590002? +

Yes. 888590002 is the current OEM number; 888590 is the earlier number it supersedes. Either stamp on a removed sensor points to this replacement family when the Verado fitment also matches.

Will this fit a 4-cylinder Verado? +

No. This listing is for six-cylinder Verado applications that use 888590002 / 888590. Four-cylinder Verado and later Pro Verado platforms may use different sensor part numbers.

Is this an OEM or aftermarket part? +

This is an aftermarket replacement manufactured by JLM Marine. It is not a genuine Mercury Marine, Mariner, or Quicksilver part. OEM numbers are listed only for cross-matching.

Important Notes

  • Verify the OEM number on your original sensor and your Verado serial against the compatibility table before ordering.
  • After replacement, complete any trim-position adaptation steps required by the Mercury / Mariner service procedure for your model.
  • This is an aftermarket replacement and is not a genuine Mercury Marine / Mariner / Quicksilver OEM component.
  • Professional installation is recommended for Verado trim position sensors.

Why Choose JLM MARINE?

  • Precision Fit: Cross-referenced to Mercury 888590002 (and superseded 888590) for the Verado 6-cylinder applications listed above.
  • Quality Control: Each batch is inspected for dimensional consistency and workmanship.
  • Direct from Manufacturer: Aftermarket marine trim position sensors engineered for reliable Verado trim feedback.

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.

Сопутствующие товары

Недавно просмотренные продукты