Images
Product
Price
Qty
Options
$81.69
Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
Mercury 175 VERADO (4-STROKE)(4 CYL.) (1B517159 & Up) Parts & Diagrams
🔎 Mercury 175 VERADO (4-STROKE)(4 CYL.) Reference Library — Exploded parts diagrams (37 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 175 VERADO (4-STROKE)(4 CYL.) is a 4-Stroke, V6 64-degree, DOHC, 24-valve outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, V6 64-degree, DOHC, 24-valve |
| Horsepower | 175 HP |
| Displacement | 3400 cc (3.4L / 209 CID) |
| Bore x Stroke | 92 mm x 86 mm (3.6 in. x 3.4 in.) |
| Spark Plug (Type & Gap) | NGK LKAR7C-9 |
| Engine Oil Capacity | 6.0 L (6.3 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 25W-40 |
| Gear Case Oil Capacity | 710 mL (24.0 oz) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-5800 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 175 VERADO (4-STROKE)(4 CYL.):
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 175 VERADO (4-STROKE)(4 CYL.).
▶Accessories (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 881150K1 | SEAL KIT, Flush - Dual Water Pickup Comment: (Mercury Precision Parts) |
▶Adaptor Plate Hose Routings (20 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 32-8M0087072 | HOSE Comment: SN# 1B792495 & Up |
| 2 | 25-884546 | GROMMET |
| 3 | 32-8M0087082 | HOSE |
| 4 | 25-884546 | GROMMET |
| 5 | 32-8M0087074 | HOSE |
| 6 | 25-884546 | GROMMET |
| 7 | 888523001 | CLIP |
| 8 | 32-8M0087084 | HOSE Comment: SN# 1B792495 & Up |
| 9 | 25-884546 | GROMMET |
| 10 | 32-8M0087071 | HOSE, Water |
| 11 | 32-8M0087073 | HOSE, To CAC |
| 12 | 32-8M0087068 | HOSE Comment: SN# 1B792495 & Up |
| 13 | 35-879885Q | FILTER, Fuel |
| 14 | 32-8M0087089 | HOSE, To Fuel Rail Comment: SN# 1B792495 & Up |
| 15 | 32-8M0087073 | HOSE |
| 16 | 8M0175814 | CANISTER ASSEMBLY |
| 17 | 25-897434 | GROMMET |
| 18 | 8M0126939 | VENT ASSEMBLY, Purge |
| 19 | 25-897452 | GROMMET |
| 20 | 54-815504104 | CLAMP, Worm Gear |
▶Adaptor Plate-Lower (27 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-896142A07 | GASKET SET, Powerhead |
| 1 | 896241 | TUBE, Oil Pickup |
| 2 | 25-38780 | O-RING |
| 3 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
| 4 | 27-895822 | GASKET, Oil Sump |
| 5 | 895825T01 | TUBE ASSEMBLY, Exhaust |
| 6 | 8M0114707 | POPPET ASSEMBLY |
| 7 | 24-64878 | SPRING, (Black) |
| 8 | 893385001 | RETAINER |
| 9 | 648771 | DIAPHRAGM |
| 10 | 889706 | WASHER |
| 11 | 10-69570 | SCREW, (#10-16 x .750) |
| 12 | 893384001 | COVER, Poppet |
| 13 | 27-889561 | GASKET, Poppet |
| 14 | 10-88552535 | SCREW, (M6 x 35 MM) Stainless Steel |
| 15 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 16 | 26-880629 | SEAL, Exhaust Tube |
| 17 | 895821T | SUMP ASSEMBLY, Oil |
| 18 | 10-8M0103808 | SCREW, (M6 x 30 MM) Stainless Steel |
| 19 | 888592005 | PLUG ASSEMBLY, Oil Drain |
| 20 | 26-888593 | SEAL |
| 21 | 896242 | SEAL |
| 22 | 32-896107A02 | TUBE ASSEMBLY, Water Comment: (X-Long) |
| 23 | 25-892445 | O-RING |
| 24 | 22-8M0214983 | COUPLING |
| 25 | 25-8M0204673 | O-RING, (.921 x .139) |
| 26 | 25-8M0204645 | O-RING, (.796 x .139) |
▶Alternator/Belt Tensioner Mounting (16 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 892940T02 | ALTERNATOR |
| 2 | 8M0101707 | BELT TENSIONER |
| 3 | 8M6003035 | PULLEY |
| 4 | 10-885349501 | SCREW |
| 5 | 23-855729 | MOUNT |
| 6 | 12-845998 | WASHER, (.406 x 1.250 x .089) |
| 7 | 10-8M0103823 | SCREW, (M10 x 45) |
| 8 | 8M0219204 | BRACKET, Alternator |
| 9 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 10 | 57-8M0232583 | BELT, Drive |
| 11 | 10-8M0103824 | SCREW, (M10 x 85) |
| 12 | 12-4002319 | WASHER |
| 13 | 11-401386 | NUT, (M6) Stainless Steel |
| 14 | 84-856583A12 | CABLE ASSEMBLY |
| 15 | 84-858414A05 | CABLE ASSEMBLY, Stainless Steel, Braided |
| 16 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
▶Charge Cooler/Intake Manifold Hose Routings (13 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | NSS | NOT SOLD SEPARATE, Hose Assembly-Complete |
| 1 | 11-826292 | NUT, (M10) Brass/Nickel Plated |
| 2 | 10-8M0048051 | SCREW, (M6 x 30) Stainless Steel |
| 3 | 32-896255 | HOSE |
| 4 | 22-8M6003382 | FITTING ASSEMBLY, Flushing |
| 5 | 32-889592001 | HOSE |
| 6 | 54-8M0187145 | CLAMP, (34.6 mm) |
| 7 | 32-896257 | HOSE |
| 8 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 9 | 54-8M0187145 | CLAMP, (34.6 mm) |
| 10 | 32-8M0087088 | HOSE, Manifold Reference-Upper |
| 11 | 10-8M0103821 | SCREW, (M10 x 30) |
| 12 | 10-88552765 | SCREW, (M10 x 65) |
▶Charge Cooler/Intake Manifold(Gen I) End Cap Not Serviced (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 8M0185612 | MODULE ASSEMBLY, Intergrated Air/Fuel Comment: SN# 1B733801 thru 1B842419, 1B870105 THRU 1B870852 |
| 1 | 8M0132387 | CAC ASSEMBLY |
| 2 | NSS | NOT SOLD SEPARATE, Fitting |
| 3 | NSS | NOT SOLD SEPARATE, O-Ring |
| 4 | NSS | NOT SOLD SEPARATE, Stack Assembly |
| 5 | NSS | NOT SOLD SEPARATE, Seal Kit |
| 6 | NSS | NOT SOLD SEPARATE, Seal |
| 7 | NSS | NOT SOLD SEPARATE, Screw |
| 8 | NSS | NOT SOLD SEPARATE, Washer |
| 9 | 19-8M0048079 | FITTING |
| 10 | NSS | NOT SOLD SEPARATE, O-Ring |
| 11 | 10-895053 | SCREW, (M6 x 15) |
| 12 | 891663001 | SENSOR ASSEMBLY, Temperature |
| 13 | 25-892317001 | O-RING |
| 14 | 10-895054 | SCREW, (M4 x 16 MM) |
| 15 | 892954A01 | MANIFOLD ASSEMBLY, Intake |
| 16 | 26-896663 | SEAL |
| 17 | 895020 | SEAL |
| 18 | 8M6000639 | SENSOR |
| 19 | 54-8M0214911 | CLAMP, (15.7 mm), Map Sensor to Boot |
| 20 | 892952500 | BOOT |
| 21 | 54-8M0204719 | CLAMP, (36.1 mm) |
| 22 | 10-8M0103807 | SCREW, (M6 x 25 MM) |
| 23 | 896503A01 | FUEL RAIL KIT |
| 24 | 895028A01 | VALVE, Schrader |
| 25 | 25-895056 | O-RING |
| 26 | 895026 | BRACKET |
| 27 | 10-895051 | SCREW, (M5 x 10) |
| 28 | 895024 | BRACKET |
| 29 | 10-895051 | SCREW, (M5 x 10) |
| 30 | 895025 | DAMPER |
| 31 | 25-851889 | O-RING |
| 32 | 32-895029A01 | TUBE KIT, Fuel Inlet |
| 33 | 12-895055 | WASHER |
| 34 | 25-895057 | O-RING |
| 35 | 895027 | BRACKET |
| 36 | 10-895051 | SCREW, (M5 x 10) |
| 37 | 8M0041571 | INJECTOR, Fuel |
| 38 | 25-851889 | O-RING |
| 39 | 27-8M0006599 | GASKET |
▶Charge Cooler/Intake Manifold(Gen II) End Cap Serviced (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 8M0047056 | O-RING KIT |
| 1 | 8M0132387 | CAC ASSEMBLY |
| 2 | 19-8M0048079 | PLUG, Zero Leak (M8 x 1.0), Secondary Pressure |
| 3 | 8M0046698 | END CAP ASSEMBLY |
| 4 | 25-8M0039516 | O-RING |
| 5 | 53-8M0039464 | RING, Retaining |
| 6 | 25-8M0040116 | O-RING |
| 7 | 22-8M0039993 | FITTING |
| 8 | NSS | NOT SOLD SEPARATE Comment: INTAKE MANIFOLD |
| 9 | 26-896663 | SEAL, Manifold to CAC |
| 10 | 895020 | SEAL, Manifold Head |
| 11 | 891663001 | SENSOR ASSEMBLY, Temperature |
| 12 | 10-895054 | SCREW, (M4 x 16 MM) |
| 13 | 25-892317001 | O-RING |
| 14 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel, CAC to Manifold |
| 15 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel, Manifold to CAC |
| 16 | 8M6000639 | SENSOR |
| 17 | 54-8M0214911 | CLAMP, (15.7 mm) |
| 18 | 8M0041053 | BOOT, MAP Sensor |
| 19 | 54-8M0204719 | CLAMP, (36.1 mm) |
| 20 | 8M0129470 | FUEL RAIL ASSEMBLY |
| 21 | 32-8M0047054 | TUBE KIT, Fuel Inlet |
| 22 | 8M0041097 | BRACKET |
| 23 | 10-8M0041100 | SCREW, (M5 x 10) |
| 24 | 8M0047053 | VALVE KIT, Shrader |
| 25 | 8M0041097 | BRACKET |
| 26 | 10-8M0041100 | SCREW, (M5 x 10) |
| 27 | NSS | NOT SOLD SEPARATE, FUEL RAIL |
| 28 | 8M0041096 | BRACKET, Fuel Injector Mounting |
| 29 | 8M0041571 | INJECTOR ASSEMBLY, Fuel |
| 30 | 10-8M0041100 | SCREW, (M5 x 10) |
| 31 | 8M0041101 | DAMPER |
| 32 | NSS | NOT SOLD SEPARATE, O-RING, Schrader Valve |
| 33 | 25-851889 | O-RING, Damper |
| 34 | 25-851889 | O-RING, Fuel Injector |
| 35 | NSS | NOT SOLD SEPARATE, O-RING, Tube |
▶Crankshaft, Pistons and Connecting Rods (22 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-896499A08 | LONG BLOCK ASSEMBLY |
| 1 | 400-880514A02 | CRANKSHAFT ASSEMBLY |
| 2 | 28-91800 | KEY, Woodruff |
| 3 | 23-8M0117004 | BEARING, Thrust - Orange, Crankshaft-Lower Comment: (Orange) |
| 4 | 26-8M0032912 | SEAL, Top Main Bearing |
| 5 | 23-897498T08 | BEARING, Main (Orange), Crankshaft-Upper |
| 6 | 19-885348 | CAP, Flywheel Bolt |
| 7 | 8M0103398 | CHAIN, Roller Cam Drive |
| 8 | 662-8M0103285 | CONNECTING ROD ASSEMBLY |
| 9 | 10-884441 | BOLT |
| 10 | 23-892005A03 | BEARING, Connecting Rod - Orange Comment: (Orange) |
| 11 | 700-898499T02 | PISTON ASSEMBLY |
| 12 | 39-881180A02 | RING SET, Piston |
| 13 | NSS | NOT SOLD SEPARATE, Oil Ring |
| 14 | NSS | NOT SOLD SEPARATE, Piston Ring-Second |
| 15 | NSS | NOT SOLD SEPARATE, Piston Pin |
| 16 | 40-896594 | CIRCLIP |
| 17 | 200-892920T03 | FLYWHEEL ASSEMBLY |
| 18 | 10-8M0147042 | BOLT, (M20 x 68 MM) |
| 19 | 12-8M0090010 | WASHER |
| 20 | 23-896883 | SPACER |
| 21 | 53-896882 | RING, Retaining |
▶Cylinder Block (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-896499A08 | LONG BLOCK ASSEMBLY |
| 1 | 800-880504A13 | CYLINDER BLOCK ASSEMBLY |
| 2 | 8M0111325 | BRACKET, Mounting-Starter Motor |
| 3 | 10-8M0103815 | SCREW, (M8 x 40) |
| 4 | 19-889767 | PLUG, (12 mm) |
| 5 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 6 | 23-893392001 | DAMPER |
| 7 | 19-891953 | PLUG, (18 mm) |
| 8 | 17-880524 | PIN, Dowel (14 mm) |
| 9 | 25-884409 | O-RING |
| 10 | 17-884424 | PIN, Dowel (11 mm) |
| 11 | 25-884423 | O-RING |
| 12 | 10-8M4501000 | SCREW, (M10 x 342) |
| 13 | 12-892573001 | WASHER |
| 14 | 11-401388 | NUT, (M8) Stainless Steel |
| 15 | 8M0082988 | SENSOR |
| 16 | 10-40011107 | SCREW, (M5 x 16) Stainless Steel |
| 17 | 8M0142542 | SENSOR ASSEMBLY |
| 18 | 25-896699 | O-RING, (1.78 mm x .08 mm) |
| 19 | 11-400213 | NUT, (M8) Stainless Steel |
| 20 | 27-8M0024565 | GASKET, Head |
| 21 | 12-36001 | WASHER |
| 22 | 10-8M0193831 | SCREW, (M8 x 115) |
| 23 | 10-8M0193659 | SCREW, (M8 x 50) |
| 24 | 27-896142 | GASKET, Block to Adaptor |
| 25 | 880559 | GUIDE, Fixed |
| 26 | 880557 | GUIDE, Moveable |
| 27 | 10-892456045 | SCREW |
| 28 | 10-8M0103829 | SCREW, (M10 x 120) |
| 29 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 30 | 10-8M0103818 | SCREW, (M8 x 75) |
| 31 | 16-8M0022161 | STUD, (M8 x 1.5) |
▶Cylinder Head and Camshaft (54 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-896499A08 | LONG BLOCK ASSEMBLY |
| 1 | 900-8M0110154 | CYLINDER HEAD ASSEMBLY |
| 2 | 19-889767 | PLUG, (12 mm) |
| 3 | 19-891953 | PLUG, (18 mm) |
| 4 | 19-896951 | PLUG, (24 mm) |
| 5 | 19-8M0087446 | PLUG, (10 mm) |
| 6 | 17-880524 | PIN, Dowel (14 mm) |
| 7 | 10-8M0163131 | BOLT, (M6 x 36 MM) |
| 8 | 880533 | SEAT, Intake Valve |
| 9 | 8M0089477 | SEAT, Exhaust Valve |
| 10 | 880537 | GUIDE, Intake and Exhaust Valves |
| 11 | 20-898907 | VALVE, Intake |
| 12 | 20-898908 | VALVE, Exhaust |
| 13 | 26-8M0214986 | SEAL, Valve |
| 14 | 24-8M0011503 | SPRING, Intake and Exhaust Valve |
| 15 | 8M0908500 | RETAINER ASSEMBLY, Valves |
| 16 | 28-880543 | KEY |
| 17 | NSS | NOT SOLD SEPARATE, CAP |
| 18 | 400-898397A04 | CAMSHAFT ASSEMBLY, Intake |
| 19 | 400-892862T03 | CAMSHAFT ASSEMBLY, Exhaust |
| 20 | 899912035 | TAPPET, (3.721) |
| 21 | 10-892454030 | SCREW, (M6 x 30) Comment: SN# 1B733388 & Below |
| 22 | 880553A07 | COVER ASSEMBLY, Cam Comment: SN# 1B733389 & Up |
| 23 | 892584 | SEAL |
| 24 | 892893 | SEAL |
| 25 | 8M0010625 | PLATE, Coil |
| 26 | 859578A1 | PLUG ASSEMBLY, Oil |
| 27 | 25-8M0204673 | O-RING, (.921 x .139) |
| 28 | 880558 | GUIDE, Short Comment: SN# 1B733388 & Below |
| 29 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 30 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 31 | 10-8M0103817 | SCREW, (M8 x 60) |
| 32 | 898463A01 | TENSIONER ASSEMBLY |
| 33 | 25-898836 | O-RING, Brown (Also part of Complete Cylinder Head) |
| 34 | 1100-8M0064752 | END CAP, Tensioner |
| 35 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
| 36 | 10-8M0103809 | SCREW, (M6 x 40 MM) Stainless Steel |
| 37 | 54-892833 | CLIP |
| 38 | 32-892812A03 | HOSE ASSEMBLY, Breather |
| 39 | 339-880615T01 | COIL ASSEMBLY |
| 40 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
| 41 | 33-889246Q39 | SPARK PLUG, NGK-ILFR6GE |
| 42 | 54-858954 | CLIP, (.625) |
| 43 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
| 44 | 43-880550 | SPROCKET, Cam Drive |
| 45 | 10-8M0021532 | SCREW, (M12 x 40) (Left Hand) |
| 46 | 10-8M0103804 | SCREW, (M6 x 12 MM) Stainless Steel |
| 47 | 54-889746001 | CLIP |
| 48 | 54-888988019 | CLAMP, (22.6 mm) |
| 49 | 10-8M0103804 | SCREW, (M6 x 12 MM) Stainless Steel |
| 50 | 8M0011987 | SENSOR ASSEMBLY |
| 51 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 52 | 10-88552585 | SCREW, (M6 x 85 MM) Stainless Steel (Included with Cam Cover Assembly) |
| 53 | 12-8M0008232 | WASHER (Included with Cam Cover Assembly) |
▶Driveshaft Housing (25 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1500-895305T01 | HOUSING, Driveshaft |
| 2 | NSS | NOT SOLD SEPARATE, Decal-Oil Drain |
| 3 | 25-889568001 | GROMMET |
| 4 | 889656T01 | SHROUD |
| 5 | 10-8M0103818 | SCREW, (M8 x 75) |
| 6 | 10-8M0103812 | SCREW, (M8 x 120) |
| 7 | 10-8M0103816 | SCREW, (M8 x 50) |
| 8 | 10-8M0103815 | SCREW, (M8 x 40) |
| 9 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 10 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 11 | 896210T | BRACKET |
| 12 | 10-8M0103822 | SCREW, (M10 x 40) |
| 13 | 10-8M0103816 | SCREW, (M8 x 50) |
| 14 | 896095C01 | CLAMP, Lower Mount |
| 15 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 16 | 27-895827 | GASKET |
| 17 | 16-8M0008031 | STUD, (M12 x 52) Comment: (Long) |
| 18 | 12-856982 | WASHER, (.500 x .810 x .090) Stainless Steel |
| 19 | 11-896895 | NUT, (M12) |
| 20 | 10-8M0102995 | SCREW, (M12 x 35 MM) Comment: (Long) |
| 21 | 19-824928001 | PLUG, Rubber (Use where Applicable) |
| 22 | 8M0105088 | SPACER Comment: (X-Long) |
| 23 | 10-857137 | SCREW, (M12 x 160) Comment: (X-Long) |
| 24 | 16-8M0008047 | STUD, (M12 x 179) Comment: (X-Long) |
| 25 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) Comment: (X-Long) |
▶Electrical Box Components (45 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-896499A08 | LONG BLOCK ASSEMBLY |
| 1 | 896230T02 | BOX ASSEMBLY, Electrical |
| 2 | NSS | NOT SOLD SEPARATE, Cover |
| 3 | 88-8M0167280 | COVER |
| 4 | 25-885583 | SEAL |
| 5 | 889531 | STRAP |
| 6 | 895099 | EXTRACTOR, Fuse |
| 7 | 25-833155 | GROMMET |
| 8 | 23-8502341 | BUSHING |
| 9 | 88-8M0207797 | FUSE, Mini - Gray - 2 Ampere |
| 10 | 892244 | STRAP, Cover |
| 11 | 54-892448 | CLIP |
| 12 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 13 | 10-40011145 | SCREW, (M8 x 10) Stainless Steel |
| 14 | 12-843108 | WASHER, (.330 x .560 x .060) Stainless Steel |
| 15 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 16 | 11-400213 | NUT, (M8) Stainless Steel |
| 17 | 89790734T | PCM, Propulsion Control Module Comment: 200 |
| 18 | 54-891520001 | CLIP |
| 19 | 10-82129114 | SCREW, (M6 x 14) |
| 20 | 882751A04 | RELAY ASSEMBLY |
| 21 | NSS | NOT SOLD SEPARATE, Decal-Trim Relay |
| 22 | 889532 | BRACKET |
| 23 | 10-40007103 | SCREW, (M5 x 6) |
| 24 | 84-819514A23 | HARNESS ASSEMBLY, Trim |
| 25 | 84-892137T03 | HARNESS ASSEMBLY, Fuse |
| 26 | 84-93388A19 | CABLE ASSEMBLY |
| 27 | 84-892579A06 | HARNESS ASSEMBLY, Engine |
| 28 | 84-8M0113732 | HARNESS ASSEMBLY |
| 29 | 862646 | FUSE, Tan - 5 Ampere |
| 30 | 877613A02 | CONNECTOR ASSEMBLY, Weather Cap 6 Pin |
| 31 | 54-879962 | CLIP |
| 32 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 33 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 34 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 35 | 84-88439A25 | CABLE ASSEMBLY, Battery - Positive |
| 36 | 11-401388 | NUT, (M8) Stainless Steel |
| 37 | 11-8M0204671 | NUT, (.375-16), Battery Cable-Positive |
| 38 | 84-88439A26 | CABLE ASSEMBLY, Battery - Negative |
| 39 | 11-8M0204668 | NUT, (.312-18), Battery Cable-Negative |
| 40 | 23-8502341 | BUSHING |
| 41 | 25-833155 | GROMMET |
| 42 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 43 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 44 | 830797A01 | CONNECTOR ASSEMBLY, Weather Cap - 2 Pin Female |
▶Fuel Supply Module (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 889283A01 | TOOL KIT, Fuel Priming |
| 1 | 84-8M0056167 | HARNESS ASSEMBLY |
| 2 | 53-880596515 | CLIP |
| 3 | 25-855362001 | GROMMET |
| 4 | 23-855364 | BUSHING |
| 5 | 880596T50 | COVER KIT |
| 6 | 10-880596513 | SCREW |
| 7 | 880596503 | REGULATOR, With O-Rings |
| 8 | 54-880596512 | CLAMP |
| 9 | 32-880596A05 | HOSE |
| 10 | 8M6000359 | FLOAT |
| 11 | 880596T60 | PUMP ASSEMBLY, Fuel - High Pressure |
| 12 | 880596525 | CUSHION |
| 13 | 26-8M0026760 | SEAL |
| 14 | 26-880596510 | SEAL |
| 15 | 880596T58 | PUMP KIT, Fuel - Lift |
| 16 | 880596509 | ISOLATOR |
| 17 | 26-880596502 | SEAL |
| 18 | 880596501 | HOUSING ASSEMBLY |
| 19 | 19-880596516 | PLUG |
| 20 | 25-880596517 | O-RING |
▶Gear Housing(Driveshaft)(Standard/Counter Rotation) (51 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 817275A08 | REPAIR KIT, Water Pump-Upper |
| 1 | 1600-8M0056631 | GEAR HOUSING ASSEMBLY, Basic, Used With 1/4 Inch Shift Crank Comment: SN# 1B853028 & Up |
| 2 | 8M0010459 | FILLER BLOCK Comment: SN# 1B583980 & Up |
| 3 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 4 | 97-826134Q | ANODE |
| 5 | 10-4000333 | SCREW, (M6 x 40) |
| 6 | 11-401386 | NUT, (M6) Stainless Steel |
| 7 | 10-79953A04 | PLUG ASSEMBLY, (.375-16 x .250) |
| 8 | 26-8M0204693 | SEAL |
| 9 | 97-76214Q5 | ANODE KIT Comment: (Quicksilver) |
| 10 | 10-8M0204686 | SCREW, (.437-14 x 1.750) |
| 11 | 22-881866 | FITTING |
| 12 | 8M0047129 | COVER ASSEMBLY Comment: Design-II |
| 13 | 26-8M0204708 | SEAL, Oil Comment: Design-I and II |
| 14 | 25-896522 | O-RING, (799 x .103) Comment: Design-I and II |
| 15 | 53-8M0046563 | RETAINING RING Comment: Design-II |
| 16 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 17 | 12-77674 | WASHER |
| 18 | 27-880729 | GASKET |
| 19 | 824145 | SHIFT SHAFT |
| 20 | NSS | NOT SOLD SEPARATE, Pinion Gear Comment: (Part of 43-880709A02) |
| 21 | 11-35921 | NUT, (.625-18) |
| 22 | 12-92721 | WASHER |
| 23 | 31-42647A1 | BEARING ASSEMBLY, Roller |
| 24 | 45-895836 | DRIVESHAFT Comment: (X-Long) |
| 25 | 15-884327A02 | SHIM/BEARING ASSEMBLY Comment: SN# 1B792549 & Below |
| 26 | 15-8M0063268 | SHIM ASSEMBLY |
| 27 | NSS | NOT SOLD SEPARATE, Roller Bearing Assembly Comment: SN# 1B792549 & Below |
| 28 | NSS | NOT SOLD SEPARATE, Cup Comment: SN# 1B792549 & Below |
| 29 | NSS | NOT SOLD SEPARATE, Roller Bearing Assembly Comment: SN# 1B792549 & Below |
| 30 | NSS | NOT SOLD SEPARATE, Cup Comment: SN# 1B792549 & Below |
| 31 | 8245191 | RETAINER |
| 32 | 817275A09 | HOUSING, Water Pump-Complete |
| 33 | 26-861415A1 | SEAL KIT |
| 34 | 10-8M0204741 | SCREW, (M6 x 20) Stainless Steel |
| 35 | 47-43026T2 | IMPELLER |
| 36 | 8M0204709 | FACEPLATE |
| 37 | 53-880719 | RING, Retaining |
| 38 | 8M0007131 | CARRIER ASSEMBLY, Oil Seal |
| 39 | 25-8M0142854 | O-RING, (2.175 x .103) |
| 40 | NSS | NOT SOLD SEPARATE, Oil Seal |
| 41 | NSS | NOT SOLD SEPARATE, Oil Seal |
| 42 | 28-8M0204723 | KEY |
| 43 | 27-8172771 | GASKET |
| 44 | 27-430331 | GASKET |
| 45 | 32-85944975 | TUBING, (72.00 Inches Bulk) (Cut to 12 Inches) Comment: (X-Long) |
| 46 | 31-8M0146566 | BEARING ASSEMBLY, Roller/Cup Comment: SN# 1B792550 & Up |
| 47 | NSS | NOT SOLD SEPARATE, CUP Comment: SN# 1B792550 & Up |
| 48 | 15-8M0053110 | SHIM SET Comment: SN# 1B792550 & Up |
| 49 | 31-8M0146553 | BEARING, Tapered Roller Comment: SN# 1B792550 & Up |
| 50 | NSS | NOT SOLD SEPARATE, CUP Comment: SN# 1B792550 & Up |
▶Gear Housing, Prop Shaft-Counter Rotation 2B026816 & below (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-830749A01 | SEAL KIT, Gear Housing |
| 1 | 1600-8M0056631 | GEAR HOUSING ASSEMBLY, Basic, Used With 1/4 Inch Shift Crank Comment: SN# 1B853028 & Up |
| 2 | NSS | NOT SOLD SEPARATE, Plug |
| 3 | 8M0220880 | CRANK, Shifter, 1/4 Pivot Pin Comment: SN# 1B853028 & Up |
| 4 | 8M0235940 | SPOOL ASSEMBLY |
| 5 | NSS | NOT SOLD SEPARATE, Spool |
| 6 | 18-469501 | COTTER PIN |
| 7 | NSS | NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 | 43-884337A02 | GEAR ASSEMBLY, Reverse |
| 9 | 31-8M0142836 | BEARING ASSEMBLY, Roller |
| 10 | NSS | NOT SOLD SEPARATE, Cup |
| 11 | 53-8M0051043 | RING, Retaining |
| 12 | 12-8M0053823 | THRUST WASHER |
| 13 | 31-8M0142835 | BEARING ASSEMBLY, Roller-Tappered |
| 14 | NSS | NOT SOLD SEPARATE, Cup |
| 15 | 15-884328A01 | SHIM SET |
| 16 | 24-30893 | SPRING |
| 17 | 52-880714T | CLUTCH |
| 18 | 17-8M0100263 | PIN, Cross |
| 19 | 17-828356 | PIN, Detent |
| 20 | 44-888530 | PROPELLER SHAFT |
| 21 | 43-884335A02 | GEAR ASSEMBLY, Forward |
| 22 | 880699 | THRUST RING |
| 23 | 31-815480 | BEARING, Thrust |
| 24 | 880696A10 | CARRIER ASSEMBLY, Bearing |
| 25 | 25-8M0142840 | O-RING, (3.850 x .210) |
| 26 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 27 | 8M0148384 | ADAPTOR, Bearing |
| 28 | 15-47397A1 | SHIM SET |
| 29 | 15-891936A01 | SHIM SET |
| 30 | 31-8M0148319 | BEARING ASSEMBLY, Tapered |
| 31 | NSS | NOT SOLD SEPARATE, Cup |
| 32 | 26-8M0204700 | SEAL, Oil |
| 33 | 26-8M0204700 | SEAL, Oil |
| 34 | 10-880717A01 | SCREW/SEAL KIT |
| 35 | 26-8M0204693 | SEAL |
| 36 | 8M0053183 | ADAPTOR |
| 37 | 23-891919001 | SPACER, Thrust |
| 38 | 14-880697 | KEYED WASHER |
| 39 | 8M2011027 | RETAINER |
| 40 | NSS | NOT SOLD SEPARATE, Decal-Counter Rotation |
| 41 | 896233A01 | DRIVE SLEEVE ASSEMBLY |
| 42 | 8M0061986 | ADAPTOR |
| 43 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (Quicksilver Branded) |
▶Gear Housing, Prop Shaft-Counter Rotation 2B026817 & up (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-830749A01 | SEAL KIT, Gear Housing |
| 1 | 1600-8M0056631 | GEAR HOUSING ASSEMBLY, Basic, Used With 1/4 Inch Shift Crank Comment: SN# 1B853028 & Up |
| 2 | NSS | NOT SOLD SEPARATE, Plug |
| 3 | 8M0220880 | CRANK, Shifter, 1/4 Pivot Pin Comment: SN# 1B853028 & Up |
| 4 | 8M0235940 | SPOOL ASSEMBLY |
| 5 | NSS | NOT SOLD SEPARATE, Spool |
| 6 | 18-469501 | COTTER PIN |
| 7 | NSS | NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 | 43-884337A02 | GEAR ASSEMBLY, Reverse |
| 9 | 31-8M0142836 | BEARING ASSEMBLY, Roller |
| 10 | NSS | NOT SOLD SEPARATE, Cup |
| 11 | 53-8M0051043 | RING, Retaining |
| 12 | 12-8M0053823 | THRUST WASHER |
| 13 | 31-8M0142835 | BEARING ASSEMBLY, Roller-Tappered |
| 14 | NSS | NOT SOLD SEPARATE, Cup |
| 15 | 15-884328A01 | SHIM SET |
| 16 | 24-30893 | SPRING |
| 17 | 52-880714T | CLUTCH |
| 18 | 17-8M0100263 | PIN, Cross |
| 19 | 17-828356 | PIN, Detent |
| 20 | 44-8M0140446 | PROPELLER SHAFT |
| 21 | 43-884335A02 | GEAR ASSEMBLY, Forward |
| 22 | 880699 | THRUST RING |
| 23 | 31-815480 | BEARING, Thrust |
| 24 | 12-8M0050439 | WASHER, .050 |
| 25 | 8M0086846 | CARRIER ASSEMBLY, Bearing |
| 26 | 25-8M0142840 | O-RING, (3.850 x .210) |
| 27 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 28 | 8M0148384 | ADAPTOR, Bearing |
| 29 | 15-47397A1 | SHIM SET |
| 30 | 31-8M0148319 | BEARING ASSEMBLY, Tapered |
| 31 | NSS | NOT SOLD SEPARATE, Cup |
| 32 | 26-8M0204700 | SEAL, Oil |
| 33 | 26-8M0204700 | SEAL, Oil |
| 34 | 10-880717A01 | SCREW/SEAL KIT |
| 35 | 26-8M0204693 | SEAL |
| 36 | 8M0053183 | ADAPTOR |
| 37 | 23-8M0064306 | SPACER |
| 38 | 14-880697 | KEYED WASHER |
| 39 | 8M2011027 | RETAINER |
| 40 | NSS | NOT SOLD SEPARATE, Decal-Counter Rotation |
| 41 | 896233A01 | DRIVE SLEEVE ASSEMBLY |
| 42 | 8M0061986 | ADAPTOR |
| 43 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (Quicksilver Branded) |
▶Gear Housing, Propeller Shaft-Std Rotation 2B026816 & below (39 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-830749A01 | SEAL KIT, Gear Housing |
| 1 | 1600-8M0056631 | GEAR HOUSING ASSEMBLY, Basic, Used With 1/4 Inch Shift Crank Comment: SN# 1B853028 & Up |
| 2 | NSS | NOT SOLD SEPARATE, Plug |
| 3 | 8M0220880 | CRANK, Shifter, 1/4 Pivot Pin Comment: SN# 1B853028 & Up |
| 4 | 8M0235940 | SPOOL ASSEMBLY |
| 5 | NSS | NOT SOLD SEPARATE, Spool |
| 6 | 18-469501 | COTTER PIN |
| 7 | NSS | NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 | 43-880709A03 | GEAR ASSEMBLY, Forward |
| 9 | 15-884328A01 | SHIM SET |
| 10 | 31-8M0142836 | BEARING ASSEMBLY, Roller |
| 11 | NSS | NOT SOLD SEPARATE, Cup |
| 12 | 53-8M0051043 | RING, Retaining |
| 13 | 12-8M0053823 | THRUST WASHER |
| 14 | 31-8M0142835 | BEARING ASSEMBLY, Roller-Tappered |
| 15 | NSS | NOT SOLD SEPARATE, Cup |
| 16 | 52-880714T | CLUTCH |
| 17 | 24-30893 | SPRING |
| 18 | 17-828356 | PIN, Detent |
| 19 | 44-888530 | PROPELLER SHAFT |
| 20 | 17-8M0100263 | PIN, Cross |
| 21 | 43-8M0119541 | GEAR ASSEMBLY, Reverse |
| 22 | 880699 | THRUST RING |
| 23 | 23-891919001 | SPACER, Thrust |
| 24 | 880696A08 | CARRIER ASSEMBLY, Bearing |
| 25 | 15-891936A01 | SHIM SET |
| 26 | 30-8M0142873 | BEARING, Ball |
| 27 | 26-8M0204700 | SEAL, Oil |
| 28 | 31-8M0148319 | BEARING ASSEMBLY, Tapered |
| 29 | NSS | NOT SOLD SEPARATE, Cup |
| 30 | 26-8M0204700 | SEAL, Oil |
| 31 | 25-8M0142840 | O-RING, (3.850 x .210) |
| 32 | 10-880717A01 | SCREW/SEAL KIT |
| 33 | 26-8M0204693 | SEAL |
| 34 | 14-880697 | KEYED WASHER |
| 35 | 8M2011027 | RETAINER |
| 36 | 896233A01 | DRIVE SLEEVE ASSEMBLY |
| 37 | 8M0061986 | ADAPTOR |
| 38 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (Quicksilver Branded) |
▶Gear Housing, Propeller Shaft-Std Rotation 2B026817 & up (39 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-830749A01 | SEAL KIT, Gear Housing |
| 1 | 1600-8M0056631 | GEAR HOUSING ASSEMBLY, Basic, Used With 1/4 Inch Shift Crank Comment: SN# 1B853028 & Up |
| 2 | NSS | NOT SOLD SEPARATE, Plug |
| 3 | 8M0220880 | CRANK, Shifter, 1/4 Pivot Pin Comment: SN# 1B853028 & Up |
| 4 | 8M0235940 | SPOOL ASSEMBLY |
| 5 | NSS | NOT SOLD SEPARATE, Spool |
| 6 | 18-469501 | COTTER PIN |
| 7 | NSS | NOT SOLD SEPARATE, Sleeve Adjusting |
| 8 | 43-880709A03 | GEAR ASSEMBLY, Forward |
| 9 | 15-884328A01 | SHIM SET |
| 10 | 31-8M0142836 | BEARING ASSEMBLY, Roller |
| 11 | NSS | NOT SOLD SEPARATE, Cup |
| 12 | 53-8M0051043 | RING, Retaining |
| 13 | 12-8M0053823 | THRUST WASHER |
| 14 | 31-8M0142835 | BEARING ASSEMBLY, Roller-Tappered |
| 15 | NSS | NOT SOLD SEPARATE, Cup |
| 16 | 52-880714T | CLUTCH |
| 17 | 24-30893 | SPRING |
| 18 | 17-828356 | PIN, Detent |
| 19 | 44-8M0140446 | PROPELLER SHAFT |
| 20 | 17-8M0100263 | PIN, Cross |
| 21 | 43-8M0119541 | GEAR ASSEMBLY, Reverse |
| 22 | 880699 | THRUST RING |
| 23 | 23-8M0064306 | SPACER |
| 24 | 12-8M0050439 | WASHER, .050 |
| 25 | 8M0083392 | CARRIER ASSEMBLY, Bearing |
| 26 | 30-8M0142873 | BEARING, Ball |
| 27 | 26-8M0204700 | SEAL, Oil |
| 28 | 31-8M0148319 | BEARING ASSEMBLY, Tapered |
| 29 | NSS | NOT SOLD SEPARATE, Cup |
| 30 | 26-8M0204700 | SEAL, Oil |
| 31 | 25-8M0142840 | O-RING, (3.850 x .210) |
| 32 | 10-880717A01 | SCREW/SEAL KIT |
| 33 | 26-8M0204693 | SEAL |
| 34 | 14-880697 | KEYED WASHER |
| 35 | 8M2011027 | RETAINER |
| 36 | 896233A01 | DRIVE SLEEVE ASSEMBLY |
| 37 | 8M0061986 | ADAPTOR |
| 38 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (Quicksilver Branded) |
▶Induction Components (52 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 896246A04 | INTAKE ASSEMBLY, Upper |
| 2 | 25-8349851 | GROMMET |
| 3 | 35-896247 | FILTER |
| 4 | 25-20116 | GROMMET, Fuel Vent Hose |
| 5 | 10-897703 | SCREW |
| 6 | 23-826618 | BUSHING |
| 7 | 10-40011129 | SCREW, (M6 x 25) Stainless Steel |
| 8 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 9 | 8M0035481 | TUBE ASSEMBLY, Hot Air Duct |
| 10 | 32-896259 | HOSE |
| 11 | 32-896271 | HOSE |
| 12 | 54-888988020 | CLAMP, Oetiker |
| 13 | 54-888988021 | CLAMP, Oetiker |
| 14 | 54-893342 | CLAMP |
| 15 | 19-8M0074364 | COVER, Hose Clamp End |
| 16 | 898022 | DIPSTICK, Oil |
| 17 | 10-8M0103808 | SCREW, (M6 x 30 MM) Stainless Steel |
| 18 | 25-813644002 | GROMMET |
| 19 | 23-898445 | BUSHING |
| 20 | 892949T02 | CONTROL ASSEMBLY, Throttle - Electronic |
| 21 | 892950T02 | ISOLATOR |
| 22 | 54-815504244 | CLAMP, Worm Gear |
| 23 | 10-88552550 | SCREW, (M6 x 50 MM) Stainless Steel |
| 24 | 884353 | BRACKET |
| 25 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 26 | 892383T51 | INTAKE ASSEMBLY, Lower |
| 27 | 25-8349851 | GROMMET |
| 28 | 23-856954 | BUSHING |
| 29 | 54-888988026 | CLAMP |
| 30 | 54-888988027 | CLAMP |
| 31 | 896245001 | DUCT, Inlet |
| 32 | 896244 | COUPLER |
| 33 | NSS | NOT SOLD SEPARATE, Resonator |
| 34 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 35 | 54-889691 | CLAMP, Oetiker |
| 36 | 884408A08 | VALVE KIT, Control - Electric Boost |
| 37 | 887939007 | PLATE, Boost Valve Mounting |
| 38 | 25-892079 | O-RING |
| 39 | 10-8M0103806 | SCREW, (M6 x 20 MM) Stainless Steel |
| 40 | 23-8502341 | BUSHING |
| 41 | 25-833155 | GROMMET |
| 42 | 54-859376 | CLIP |
| 43 | 10-8M0103814 | SCREW, (M8 x 35 MM) |
| 44 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 45 | 32-892947001 | HOSE |
| 46 | 54-888988002 | CLAMP, (57.5 mm), Front Electronic Boost Control |
| 47 | 32-887938003 | TUBE, Rear |
| 48 | 54-888988004 | CLAMP, (62.0 mm), Rear Electronic Boost Control |
| 49 | 881879T25 | SENSOR ASSEMBLY, Pitot |
| 50 | 22-8M0207782 | FITTING |
| 51 | 54-883066 | CLIP, (.865) |
| 52 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
▶Lube Chart (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | NOPART | NO PARTS LIST |
▶Mercathode Kit (15 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 88334A2 | MERCATHODE KIT |
| 2 | 88334A4 | MERCATHODE ASSEMBLY |
| 3 | 10-22793 | SCREW, (#9-14 x .875) |
| 4 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel |
| 5 | 10-32,11-45076 | NUT, Brass |
| 6 | 72958A5 | ELECTRODE ASSEMBLY |
| 7 | 25-8M0204645 | O-RING, (.796 x .139) |
| 8 | 10-87698 | SCREW, (#10-16 x 1.250) Stainless Steel |
| 9 | 97-72957A5 | ANODE ASSEMBLY |
| 10 | 25-8M0204645 | O-RING, (.796 x .139) |
| 11 | 10-87698 | SCREW, (#10-16 x 1.250) Stainless Steel |
| 12 | 88-8M0207796 | FUSE, 20 Ampere |
| 13 | 84-95084A10 | CABLE ASSEMBLY, (5.00 Inches) Red |
| 14 | 84-95084A13 | CABLE ASSEMBLY, (64.00 Inches) |
| 15 | 84-79138A8 | CABLE ASSEMBLY, (72.00 Inches) Black |
▶Oil Pump/Adaptor Plate-Upper (31 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-896142A07 | GASKET SET, Powerhead |
| 1 | 896689A02 | ADAPTOR PLATE ASSEMBLY |
| 2 | 17-892228 | PIN, Dowel |
| 3 | 19-896951 | PLUG, (24 mm) |
| 4 | 25-897134 | O-RING, (1.051 x 1.070) (Inlet) |
| 5 | 25-897135 | O-RING, (.864 x .070) (Outlet) |
| 6 | 26-8M0033928 | SEAL, Oil |
| 7 | 26-884462 | SEAL, Water |
| 8 | 10-897964 | SCREW, (M6) |
| 9 | 892894T05 | PUMP ASSEMBLY, Oil |
| 10 | 10-8M0103810 | SCREW, (M6 x 45 MM) Stainless Steel |
| 11 | 10-88552535 | SCREW, (M6 x 35 MM) Stainless Steel |
| 12 | 25-892446 | O-RING, (14 X 1.78 MM) |
| 13 | 19-8M0027347 | PLUG, (M18 x 1.5) |
| 14 | 888819002 | DRAIN, Cowl |
| 15 | 22-896934A02 | FITTING ASSEMBLY, Dump |
| 16 | 25-26317 | O-RING |
| 17 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 18 | 12-8M0214930 | WASHER |
| 19 | 22-896547001 | FITTING |
| 20 | 10-8M0103804 | SCREW, (M6 x 12 MM) Stainless Steel |
| 21 | 25-896671 | GROMMET |
| 22 | 23-8M8023048 | BUSHING |
| 23 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) (Cut to 21 Inches) |
| 24 | 54-815504104 | CLAMP, Worm Gear |
| 25 | 892562T01 | HOUSING, Manifold |
| 26 | 892117 | SEAL |
| 27 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 28 | 25-897433001 | GROMMET |
| 29 | 896864001 | SEAL, Adaptor Plate |
| 30 | 25-8M0034912 | O-RING, M3.78 X 21.32 |
▶Port Cylinder Block Components (26 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 61-896499A08 | LONG BLOCK ASSEMBLY |
| 1 | 16-8M0022165 | STUD, (M10 x 175) |
| 2 | 16-8M0022162 | STUD |
| 3 | 8M6003194 | SENSOR ASSEMBLY, Knock |
| 4 | 10-892086035 | SCREW, (M10 x 35) |
| 5 | 12-4002319 | WASHER |
| 6 | 54-828991T | CLIP |
| 7 | 54-8M0187145 | CLAMP, (34.6 mm) |
| 8 | 32-8M0043736 | HOSE Comment: SN# 1B842420 thru 1B870104, 1B870853 & Up |
| 9 | 22-896094A01 | FITTING ASSEMBLY |
| 10 | 25-896699 | O-RING, (1.78 mm x .08 mm) |
| 11 | 32-85978571 | TUBING, (52.00 Inches Bulk), To Water Pressure Sensor (Cut to 21.5 Inches) |
| 12 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 13 | 881879T26 | SENSOR ASSEMBLY, Pressure, Water |
| 14 | 22-8M0207782 | FITTING |
| 15 | 54-883066 | CLIP, (.865) |
| 16 | 16-8M0000274 | STUD, (M8 x 49) |
| 17 | 11-826365 | NUT, (M8) |
| 18 | 22-885517A05 | FITTING ASSEMBLY |
| 19 | 25-892077 | O-RING |
| 20 | 16-8M0022166 | STUD, (M10 x 54) |
| 21 | 16-8M0000275 | STUD, (M8 x 55) |
| 22 | 11-826292 | NUT, (M10) Brass/Nickel Plated |
| 23 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 24 | 11-884412 | NUT |
| 25 | 893388A02 | CAP, Resitor - 2 Pin, 20K Ohm |
▶Power Trim Components (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-878285 | O-RING |
| 1 | 8M0031551 | TRIM MOTOR |
| 2 | NSS | NOT SOLD SEPARATE, Armature |
| 3 | NSS | NOT SOLD SEPARATE, End Frame |
| 4 | 10-82494830 | SCREW, (M6 x 30) |
| 5 | 13-400256 | LOCKWASHER, (M6) |
| 6 | 8782451 | DRIVESHAFT |
| 7 | 878410A1 | PO CHECK KIT |
| 8 | 893929A01 | MANUAL RELEASE ASSEMBLY (Includes Reference #26) |
| 9 | 8M0142997 | SHAFT KIT |
| 10 | 17-878267 | PIN |
| 11 | 8M0168220 | CYLINDER ASSEMBLY, Tilt |
| 12 | 878239A02 | GUIDE KIT (Includes Reference #26) |
| 13 | 8M0142999 | O-RING KIT (Includes Reference #26) |
| 14 | NSS | NOT SOLD SEPARATE, Shock Rod Kit |
| 15 | NSS | NOT SOLD SEPARATE, Spring-Damper |
| 16 | NSS | NOT SOLD SEPARATE, Plate-Damper |
| 17 | NSS | NOT SOLD SEPARATE, Shock Piston |
| 18 | 8M0143000 | PISTON ASSEMBLY, Memory |
| 19 | 878406A02 | REPAIR KIT, Check Valve (Includes Reference #26) |
| 20 | 878414T01 | PISTON ASSEMBLY (Starboard) |
| 21 | 878413A1 | PISTON ASSEMBLY (Port) |
| 22 | 1100-8M0021648 | GUIDE ASSEMBLY |
| 23 | 878264A1 | RESERVOIR KIT |
| 24 | 19-811613 | PLUG ASSEMBLY |
| 25 | 10-4000327 | SCREW, (M6 x 14) |
| 26 | 12-4002315 | WASHER |
| 27 | 892251A01 | PUMP KIT |
| 28 | 878408A1 | REPAIR KIT, Power Trim |
| 29 | 17-821539 | PIN, Trilobe |
| 30 | 10-858771 | SCREW, (M10 x 30) |
| 31 | 12-4002319 | WASHER |
| 32 | 97-818298Q1 | ANODE KIT |
| 33 | 10-8M0204707 | SCREW, (M6 x 25) |
| 34 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 35 | 99625003 | SHAFT, Upper Tilt |
▶Powerhead Gasket Set Components (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-8M0204645 | O-RING, (.796 x .139), Water Tube Coupling |
▶Rear Cowl (53 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 897593T02 | CHAP ASSEMBLY, Starboard and Port |
| 1 | NSS | NOT SOLD SEPARATE, Pan Assembly-Port Comment: SN# 1B701487 & Up |
| 2 | 25-896671 | GROMMET |
| 3 | 8M0043277 | SEAL, Front |
| 4 | 10-888950020 | SCREW, (M4 x 20 mm) Comment: SN# 1B701486 & Below |
| 5 | 23-898408 | SPACER Comment: SN# 1B701486 & Below |
| 6 | 898354 | PAWL Comment: SN# 1B701486 & Below |
| 7 | 24-898353 | SPRING Comment: SN# 1B701486 & Below |
| 8 | 888819002 | DRAIN, Cowl |
| 9 | NSS | NOT SOLD SEPARATE, Pan Assembly-Starboard Comment: SN# 1B701487 & Up |
| 10 | 25-896671 | GROMMET |
| 11 | 8M0043278 | SEAL, Back |
| 12 | 888819002 | DRAIN, Cowl |
| 13 | 19-897203 | PLUG |
| 14 | 879148T72 | PANEL AND LATCH ASSEMBLY |
| 15 | 8M0020855 | PANEL, Access |
| 16 | 8M0026713 | SEAL |
| 17 | 8M0034940 | HANDLE |
| 18 | 8M0020854 | LINK |
| 19 | 8M0041031 | LATCH ASSEMBLY, Rear |
| 20 | 8M0006054 | RETAINER |
| 21 | 8M0006060 | SEAL |
| 22 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
| 23 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 24 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 25 | 10-892073002 | SHOULDER SCREW, (M6) |
| 26 | 8M0005773 | SCREW, (M6) |
| 27 | 11-401386 | NUT, (M6) Stainless Steel |
| 28 | 25-8M0214987 | GROMMET |
| 29 | 8M0214997 | ADAPTOR |
| 30 | 10-897657055 | SCREW, (M6 x 55) |
| 31 | 10-897657025 | SCREW, (M6 x 25 MM) |
| 32 | 11-401386 | NUT, (M6) Stainless Steel |
| 33 | 22-885361A01 | FITTING ASSEMBLY, Flush |
| 34 | 8M0215105 | PLUG |
| 35 | 25-888957 | O-RING |
| 36 | 8M0224266 | TETHER |
| 37 | 87-8M0235191 | SWITCH, Trim |
| 38 | 10-897964 | SCREW, (M6) |
| 39 | 23-8M8023048 | BUSHING |
| 40 | 896925A01 | PLENUM KIT, Exhaust |
| 41 | 10-892073002 | SHOULDER SCREW, (M6) |
| 42 | 25-889828 | O-RING, (.924 x .103) |
| 43 | 22-895797001 | FITTING |
| 44 | 32-8M0108355 | HOSE, (57.00 Inches Bulk), Cut to 21 Inches |
| 45 | 54-895851 | CLAMP, (8.00 Inches) |
| 46 | 896618A02 | COVER ASSEMBLY, Rear |
| 47 | 896924 | BOOT, Idle Exhaust |
| 48 | 896054T01 | CHAP ASSEMBLY, Port |
| 49 | 897204 | SOUND BLANKET, Starboard |
| 50 | 896055T01 | CHAP ASSEMBLY, Starboard |
| 51 | 897205 | SOUND BLANKET, Port |
| 52 | 10-892073002 | SHOULDER SCREW, (M6) |
▶Service/Support Material (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | NSS | NOT SOLD SEPARATE, DECAL, EPA (2009 & Up) Comment: Contact Mercury Marine Warranty Administration for Replacement (Service Bulletin 2009-18) |
▶Shift Components (43 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | NSS | NOT SOLD SEPARATE, Actuator Plate Assembly-Complete |
| 1 | 895739T | BRACKET, Shift |
| 2 | 25-855362001 | GROMMET |
| 3 | 23-855364 | BUSHING |
| 4 | 8M0124413 | SHIFT ACTUATOR |
| 5 | 23-884532001 | BUSHING |
| 6 | 10-81893435 | SCREW, (M8 x 35) |
| 7 | 12-898097 | WASHER |
| 8 | 12-889661 | WASHER, Rubber |
| 9 | 23-888589 | WEAR SLEEVE |
| 10 | 10-8M0103817 | SCREW, (M8 x 60) |
| 11 | 12-898097 | WASHER |
| 12 | 23-884554 | BUSHING |
| 13 | 895737 | BELL CRANK |
| 14 | 17-895736 | PIN |
| 15 | 885569 | SPLIT RING |
| 16 | NSS | NOT SOLD SEPARATE, Cotter Pin (Service Bulletin 2003-10) |
| 17 | 884599 | SPACER |
| 18 | 84-88807A6 | CABLE ASSEMBLY, (3.50 Inches) Black |
| 19 | 896212 | RAIL SHIFT SLIDE |
| 20 | 10-82155025 | SCREW, (M8 x 25 MM) Stainless Steel |
| 21 | 898053A01 | SHIFT SLIDER KIT |
| 22 | 23-884555 | BUSHING |
| 23 | 10-82104510 | SCREW, (M5 x 10) |
| 24 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 25 | 887901 | BUSHING |
| 26 | 54-828991T | CLIP |
| 27 | 16-8M0025850 | STUD (Included with Reference 21) |
| 28 | 23-896551 | BUSHING |
| 29 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 30 | 11-401386 | NUT, (M6) Stainless Steel |
| 31 | 895742 | SHIFT LINK |
| 32 | 8M0091614 | LEVER, Shift Shaft Comment: (X-Long) |
| 33 | 23-74647 | NYLINER |
| 34 | 23-896551 | BUSHING |
| 35 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 36 | 11-8M0045046 | NUT, (M6) Stainless Steel |
| 37 | 87-8M0207794 | SWITCH |
| 38 | 10-88075020 | SCREW, (M3 x 20) |
| 39 | 16-8M0022167 | STUD, (M8 x 50) |
| 40 | 12-4002318 | WASHER |
| 41 | 11-401388 | NUT, (M8) Stainless Steel |
| 42 | 12-8M0204690 | WASHER, (.344 x .688 x .065) Stainless Steel |
▶Starboard Cylinder Block/Oil Cooler(1B830999 and Below) (42 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-896142A07 | GASKET SET, Powerhead |
| 1 | 892404A05 | DEFLECTOR ASSEMBLY, Water |
| 2 | 22-885518A02 | FITTING ASSEMBLY |
| 3 | 25-62701 | O-RING |
| 4 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 5 | 54-888988011 | CLAMP, (38.1 mm) |
| 6 | 32-888930003 | HOSE |
| 7 | 54-8M0187145 | CLAMP, (34.6 mm) |
| 8 | 8M0174561 | THERMOSTAT ASSEMBLY |
| 9 | 25-8M0005958 | O-RING |
| 10 | 54-8M0204719 | CLAMP, (36.1 mm) |
| 11 | 32-896059001 | HOSE, Thermostat |
| 12 | 54-888988007 | CLAMP, (42.5 mm) |
| 13 | 35-8M0062950 | FILTER, Fuel |
| 14 | 35-8M0122423 | FILTER, Fuel |
| 15 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 16 | 22-892356 | CONNECTOR |
| 17 | 19-863156 | GRAB TAB |
| 18 | 32-8M0087061 | HOSE, Fuel to Lift Pump Comment: SN# 1B792495 & Up |
| 19 | 892147A01 | BRACKET ASSEMBLY |
| 20 | 897126 | BRACKET |
| 21 | 23-822003 | BUSHING |
| 22 | 25-8M0190980 | GROMMET |
| 23 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 24 | 10-82129125 | SCREW, (M6 x 25 MM) |
| 25 | 10-8M0103824 | SCREW, (M10 x 85) |
| 26 | 10-8M0103820 | SCREW, (M10 x 105) |
| 27 | 32-8M0046557 | HOSE ASSMEBLY, Fuel Inlet, 8.2 Inch Comment: SN# 1B830903 & Up |
| 28 | 8M0132389 | COOLER ASSEMBLY, Oil Comment: SN# 1B830999 & Below |
| 29 | 35-877767K01 | FILTER, Oil |
| 30 | 8M0046694 | HOUSING ASSEMBLY, Intergrated Oil Module |
| 31 | 10-8M0041014 | SCREW, (M6 x 18) |
| 32 | 27-8M0034568 | GASKET |
| 33 | 880640A06 | THERMOSTAT/GUIDE KIT |
| 34 | 880640508 | THERMOSTAT |
| 35 | 892801T53 | OVERHAUL KIT |
| 36 | 27-8M0034568 | GASKET |
| 37 | 25-8M0071635 | O-RING KIT |
| 38 | 895032 | STRAP |
| 39 | 10-8M0041014 | SCREW, (M6 x 18) |
| 40 | 54-897559 | CLIP |
| 41 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
▶Starboard Cylinder Block/Oil Cooler(1B831000 and Above) (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-896142A07 | GASKET SET, Powerhead |
| 1 | 892404A05 | DEFLECTOR ASSEMBLY, Water |
| 2 | 22-885518A02 | FITTING ASSEMBLY |
| 3 | 25-62701 | O-RING |
| 4 | 10-8M0103805 | SCREW, (M6 x 16 MM) Stainless Steel |
| 5 | 54-888988011 | CLAMP, (38.1 mm) |
| 6 | 32-888930003 | HOSE |
| 7 | 54-8M0187145 | CLAMP, (34.6 mm) |
| 8 | 8M0174561 | THERMOSTAT ASSEMBLY |
| 9 | 25-8M0005958 | O-RING |
| 10 | 54-8M0204719 | CLAMP, (36.1 mm) |
| 11 | 32-896059001 | HOSE, Thermostat |
| 12 | 54-888988007 | CLAMP, (42.5 mm) |
| 13 | 35-8M0062950 | FILTER, Fuel |
| 14 | 35-8M0122423 | FILTER, Fuel |
| 15 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 16 | 22-892356 | CONNECTOR |
| 17 | 19-863156 | GRAB TAB |
| 18 | 32-8M0087061 | HOSE, Fuel to Lift Pump |
| 19 | 892147A01 | BRACKET ASSEMBLY |
| 20 | 897126 | BRACKET |
| 21 | 23-822003 | BUSHING |
| 22 | 25-8M0190980 | GROMMET |
| 23 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 24 | 10-82129125 | SCREW, (M6 x 25 MM) |
| 25 | 10-8M0103824 | SCREW, (M10 x 85) |
| 26 | 10-8M0103820 | SCREW, (M10 x 105) |
| 27 | 32-8M0046557 | HOSE ASSMEBLY, Fuel Inlet, 8.2 Inch |
| 28 | 8M0132389 | COOLER ASSEMBLY, Oil Comment: SN# 1B831000 & Up |
| 29 | NSS | NOT SOLD SEPARATE, OIL COOLER HOUSING |
| 30 | 19-891953 | PLUG, (18 mm) |
| 31 | 8M0046698 | END CAP ASSEMBLY |
| 32 | 25-8M0039516 | O-RING |
| 33 | 53-8M0039464 | RING, Retaining |
| 34 | 35-877767K01 | FILTER, Oil |
| 35 | 8M0046693 | THERMOSTAT ASSEMBLY |
| 36 | NSS | NOT SOLD SEPARATE, THERMOSTAT STOP |
| 37 | 8M0041064 | THERMOSTAT |
| 38 | NSS | NOT SOLD SEPARATE, SPRING |
| 39 | 19-8M0046697 | PLUG |
| 40 | NSS | NOT SOLD SEPARATE, O-RING |
| 41 | 8M0046696 | ADAPTOR ASSEMBLY Comment: (Contains 2) |
| 42 | NSS | NOT SOLD SEPARATE, O-RING |
| 43 | 8M0046694 | HOUSING ASSEMBLY |
| 44 | 27-8M0034568 | GASKET |
| 45 | 10-8M0041014 | SCREW, (M6 x 18) |
| 46 | 54-897559 | CLIP |
| 47 | 10-8M0103807 | SCREW, (M6 x 25 MM) Stainless Steel |
▶Starter Motor (14 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 50-892339T01 | STARTER MOTOR ASSEMBLY |
| 2 | NSS | NOT SOLD SEPARATE, Thru Bolt |
| 3 | 43-880805A1 | GEAR KIT |
| 4 | 809463A1 | SOLENOID KIT |
| 5 | 8M0065258 | BRUSH SET |
| 6 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 7 | 84-93388A1 | CABLE ASSEMBLY, (6.00 Inches) Black |
| 8 | 37-8272822 | DECAL, Warning |
| 9 | 13-400255 | LOCKWASHER, (M5) |
| 10 | 11-400211 | NUT, (M5) Stainless Steel |
| 11 | 13-8M0204647 | LOCKWASHER, (.312) |
| 12 | 11-400213 | NUT, (M8) Stainless Steel |
| 13 | 23-8M0034918 | COLLAR |
| 14 | 8M0043276 | STOP |
▶SuperCharger (11 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8M0104460 | SUPERCHARGER |
| 2 | 71-8M0142688 | SENSOR, Oil Pressure |
| 3 | 8M0033976 | DUCT KIT, Outlet |
| 4 | 27-888947504 | GASKET |
| 5 | 10-888947502 | BOLT |
| 6 | 8M0148668 | SENSOR ASSEMBLY |
| 7 | 25-896699 | O-RING, (1.78 mm x .08 mm) |
| 8 | 8M0033874 | DUCT KIT, Inlet |
| 9 | 27-888947501 | GASKET |
| 10 | 23-847803A02 | BUSHING/GASKET KIT |
| 11 | 10-8M0103820 | SCREW, (M10 x 105) |
▶Swivel Bracket and Steering Arm (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1499-8M0102865 | SWIVEL BRACKET ASSEMBLY, Black |
| 2 | 25-8M0214926 | O-RING |
| 3 | 23-818764 | BUSHING |
| 4 | 23-816039 | SPACER |
| 5 | 26-87735 | SEAL, Oil (Lower) |
| 6 | 22-8M0169589 | FITTING, Grease |
| 7 | 23-821207 | BUSHING |
| 8 | 12-816432 | THRUST WASHER |
| 9 | 896888T | YOKE, Bottom |
| 10 | 53-67684 | RING, Retaining |
| 11 | 8M0045383 | STRIKER PLATE |
| 12 | 13-58643 | LOCKWASHER, (.375) |
| 13 | 11-46335 | NUT, (.375-24) |
| 14 | 10-896217 | BOLT, (M14 x 175) |
| 15 | 88238A10 | CABLE ASSEMBLY, Ground |
| 16 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel |
| 17 | 12-815432 | WASHER, (.562 x 2.00 x .125) |
| 18 | 12-8154331 | WASHER, (1.25 x 2.00 x .19) |
| 19 | 813771003 | MOUNT, Lower |
| 20 | 12-825190 | WASHER |
| 21 | 11-896602 | NUT, (M14) |
| 22 | 17-8M0133581 | SWIVEL PIN ASSEMBLY |
| 23 | 897991A01 | MOUNT ASSEMBLY |
| 24 | 12-898443 | WASHER, Retainer |
| 25 | 898444001 | SLEEVE |
| 26 | 11-897731001 | NUT, Spanner |
| 27 | 897728 | RETAINER |
| 28 | 10-8M0103806 | SCREW, (M6 x 20 MM) Stainless Steel |
| 29 | 11-896602 | NUT, (M14) |
| 30 | NSS | NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| 31 | 8M0074846 | SENDER ASSEMBLY, Trim, Analog |
| 32 | 10-852368 | SCREW, (#10-24 x .750) |
| 33 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 34 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 35 | 10-64014 | SCREW, (.250-28 x .500) |
| 36 | 88238T22 | CABLE ASSEMBLY |
| 37 | 54-22740 | CLIP |
| 38 | 8M0084613 | C WASHER |
| 39 | 10-878609 | SCREW, (#10-16 x .600) |
| 40 | 32-828547353 | CONDUIT, (.350 Inside Diameter x 3.00 Feet Bulk) (Cut to16 Inches) |
| 41 | 92876A12 | LINK ROD ASSEMBLY |
| 42 | 10-849838 | SCREW, (.375-24 x 1.250) |
| 43 | 12-37828 | WASHER, (.390 x .625 x .062) Stainless Steel |
| 44 | 11-8M0204726 | NUT, (.375-24) Brass |
▶Tools (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 889283A01 | TOOL KIT, Fuel Priming |
| 1 | 91-58222A1 | DIAL INDICATOR TOOL |
| 2 | 91-83155 | ADAPTER KIT, Dial Indicator |
| 3 | 91-46086A1 | PULLER JAW ASSEMBLY |
| 4 | 91-85716 | PULLER BOLT TOOL, Bearing Carrier |
| 5 | 91-8M0053505 | INDICATOR TOOL, Backlash |
| 6 | 91-892651A01 | PRESSURE METER, Digital |
| 7 | 91-52344 | FLYWHEEL HOLDER TOOL, Teeth Type |
| 8 | 91-809905001 | WRENCH, Torque Adaptor |
| 9 | 91-895040K01 | PRIMER KIT, Power Steering Module |
| 10 | 91-896661 | TOOL, Fuel Filter |
| 11 | 91-899015A01 | TOOL KIT, Upper Mount Alignment |
| 12 | 91-805382T01 | TOOL, Extension-Dial Indicator |
| 13 | 91-892651A01 | PRESSURE METER, Digital |
| 14 | 90265A5 | PUMP ASSEMBLY, Crankcase Oil |
| 16 | 91-98234A2 | DRILL FIXTURE KIT, Transom |
| 17 | 888462A1 | PULLER ASSEMBLY, Cable |
| 18 | 91-809494A1 | COMPRESSOR TOOL, Valve Spring |
| 19 | 91-822778A3 | DOWN PRESSURE KIT |
| 20 | 91-52915A6 | TEST GAUGE KIT |
| 21 | 91-44487T1 | REMOVER TOOL, Trim Rod Guide |
▶Top Cowl (14 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-8M0024880 | DECAL, Rear Comment: Mariner 200 |
| 1 | 100-8M0113900 | TOP COWL ASSEMBLY, Mariner, Without decals |
| 2 | 895845T01 | CAP, Air Dam Comment: Mariner |
| 3 | 10-888950020 | SCREW, (M4 x 20 mm) |
| 4 | 8M0020857 | STRIKER ASSEMBLY |
| 5 | 10-82130014 | SCREW, (M6 x 14) |
| 6 | 897436 | BRACKET |
| 7 | 897437T03 | LATCH ASSEMBLY, Front |
| 8 | 24-8M0109644 | SPRING |
| 9 | 17-897441 | PIN, Clevis |
| 10 | 53-27290 | RING, Retaining |
| 11 | 10-82130014 | SCREW, (M6 x 14) |
| 12 | 8M0111178 | SEAL |
| 13 | 8M4501659 | SOUND BLANKET KIT |
▶Transom Brackets (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 3425-828333A09 | TRANSOM BRACKET KIT |
| 1 | NSS | NOT SOLD SEPARATE, Transom Bracket-Starboard |
| 2 | NSS | NOT SOLD SEPARATE, Transom Bracket-Port |
| 3 | 22-8M0169588 | FITTING, Grease, Port |
| 4 | 826125A1 | TILT TUBE |
| 5 | 11-826135 | NUT, (1.00-14) Nylon Insert |
| 6 | 25-45711 | O-RING, (.612 x .103) |
| 7 | 13-88750 | WASHER |
| 8 | 11-826164 | NUT, (.875-14) |
| 9 | 10-8M0204730 | SCREW, (.500-20 x 5 Inches) |
| 10 | 12-8M0204665 | WASHER, (.530 x .870 x .105) Stainless Steel |
| 11 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 12 | 11-82671117 | NUT, (.500-20) |
| 13 | 8M0115104 | LEVER ASSEMBLY, Tilt Lock |
| 14 | 24-830899 | SPRING, Tension |
| 15 | 23-65830 | NYLINER |
| 16 | 24-830900 | SPRING, Compression |
| 17 | 99633 | KNOB |
| 18 | 17-99615 | PIN, Groove |
| 19 | 17-893709 | PIN |
| 20 | 37-8M0043059 | DECAL, Warning |
▶Water Separator Filter Kit, 8M0046336 (9 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 35-8M0113498 | FUEL FILTER KIT |
| 1 | 8M0022130 | SEPERATOR KIT, Fuel and Water |
| 2 | 8M0146206 | ELEMENT, Fuel Filter |
| 3 | 8M0214989 | SENSOR ASSEMBLY, Fuel and Water |
| 4 | 8M0214990 | BOWL Comment: Filter |
| 5 | 22-34982 | CONNECTOR |
| 6 | 22-8M0180564 | PLUG, (.250-18) |
| 7 | 84-8M0042697 | HARNESS, Water Sensor |
| 8 | 54-8M0204696 | CLAMP |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 175 VERADO (4-STROKE)(4 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
Недавно просмотренные продукты
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
- Choosing a selection results in a full page refresh.