> > > >
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009

Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009

Vendor: JLM Marine
Availability: In Stock
Product Type: Flexible Rubber Impeller
$26.40
$26.40
Subtotal: $26.40

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009

Flexible Rubber Water Pump Impeller 18673-0001 – 10 Blade Neoprene 51 mm Pin Drive – Fits Northern Lights 25-12009

$26.40
Описание

How to Match This Part

This is a flexible rubber raw water pump impeller for marine engine and generator sea water cooling pumps. It sits inside the pump housing behind the cover plate and is driven by a pin through a slotted shaft. The physical part in this listing is the 10-blade impeller that replaces Jabsco 18673-0001, JMP 7071-01 and Northern Lights 25-12009.

Match this part by checking your engine in this order:
1. Original impeller part number (stamped on the old impeller or listed in the pump section of your parts catalog)
2. Blade count on the old impeller (this listing is 10 blades)
3. Raw water pump model (cast or labelled on the pump body, for example Jabsco 2620 / 9900)
4. Engine or generator model code (on the identification plate)

Identify it physically before ordering. This impeller has ten flexible vanes moulded in black neoprene around a machined brass insert. JMP 7071-01 is 51 mm diameter, 22 mm width and 12.7 mm (1/2 in.) bore with a slotted-shaft pin drive (Jabsco Profile I). The source sheet also lists the six-blade cousins Jabsco 14673-0001 / 673-0001, Johnson 09-1026B and JMP 7051-01, which share the same 51 × 22 mm envelope but have six vanes. Count the blades on the old impeller. A six-blade hub is not this listing.

  • ✓ Primary OEM: Jabsco 18673-0001 (10 blade)
  • ✓ Product form: 10-blade neoprene impeller, brass insert, 12.7 mm pin drive
  • ✓ Fitment: part number, then blade count, then pump model

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. Jabsco 18673-0001-P is the genuine retail kit of 18673-0001 (impeller plus gasket and lubricant). This listing is the impeller only. Numbers marked as six-blade cousins are on the source sheet for search, not as a substitute for this 10-blade part.

Type Brand Part Number Notes
OEM Jabsco Pump 18673-0001 Primary 10-blade Profile I reference. 18673-0001-P is the kit number
OEM Jabsco Pump 14673-0001, 673-0001 Source-sheet Jabsco numbers. 673-0001 / 14673-0001 are the 6-blade envelope cousins (JMP 7051-01). Count blades before ordering
OEM Johnson Pump (SPX Flow) 09-1026B 6-blade F4 / F4B family (JMP 7051-01). Same 51 × 22 mm envelope, different vane count
OEM JMP Pump 7071-01 10-blade bare impeller (Excel 7071). JMP 7071-01K is a kit and is not this listing
OEM JMP Pump 7051-01 6-blade cousin (Excel 7051-01). Same envelope, six vanes. 7051-01K is a kit
OEM Northern Lights 25-12009 Generator sea water impeller. JMP cross to 7071-01 (10 blade)
OEM Perkins 24880194 Listed against both 18673-0001 (10 blade) and 673-0001 / 7051-01 (6 blade). Confirm blade count on the old impeller
OEM DJ Pump 08-31-0601 Source-sheet DJ number. DJ’s published 08-31-0601 is 40 × 19 × 12 mm (a different impeller). The 51 mm 6-blade DJ number is 09-108-0601. Do not treat 08-31-0601 as this size
OEM Cummins (KTA19) 3866609 Source-sheet Cummins Onan field. 3866609 is the KTA19 sea water pump assembly, not this impeller. KTA19 pumps use a different impeller (JMP 9001-01)
Aftermarket Sierra 23-2005, 23-3315 JMP 7071-01 equivalent list (10 blade)
Other brand Industry interchange 888-143 Source-sheet other-brand number for this SKU

Compatible Engine Models

Confirm the original impeller number and count the vanes. Volvo Penta D1 / D2 auxiliaries more often use the six-blade 7051-01 / 09-1026B of the same envelope, so they are not listed as a confirmed fit for this 10-blade part.

Brand Engine / Pump Model Original Part No. Notes
Jabsco Pump 2620-0001, 2620-0051, 2620-1001, 2620-1101, 9900-0001 18673-0001 10-blade Profile I, 12.7 mm pin drive
Northern Lights Generator sea water pump using impeller 25-12009 25-12009 Match the original impeller number. Individual M-series model codes were not dual-sourced for this page
Perkins Sea water pump using impeller 24880194 24880194 Confirm 10 blades. Some 24880194 listings also point at the 6-blade 673-0001
Johnson Pump F4, F4B (6-blade cousin, not this listing) 09-1026B Listed because it is on the source sheet. Order JMP 7051-01 / Jabsco 14673-0001 if the old impeller has six vanes

Technical Specifications

Specification Value
Part type Flexible rubber impeller, raw water / sea water cooling pump
Jabsco profile Profile I
Number of blades 10 (this listing). The 6-blade 51 × 22 mm cousin is a different part
Impeller diameter (A) 51 mm (2 in.)
Impeller width / depth (B) 22 mm (7/8 in.)
Shaft bore diameter (C) 12.7 mm (1/2 in.)
Insert / drive type Slotted shaft, through-hole pin drive
Insert material Machined brass
Vane material Neoprene rubber

Package Contents

This listing is for the impeller only. Please refer to the part number cross-reference table to confirm component details.

The source photograph shows a paper cover gasket next to the impeller for identification. That gasket is not included. Genuine Jabsco 18673-0001-P and JMP 7071-01K kits add gasket, O-ring and lubricant. Order those service parts separately against your pump model if you need them.

Installation Guide

  1. 1 Stop the engine or generator, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.
  2. 2 Remove the cover plate screws from the sea water pump and lift off the cover. Keep the screws and the old gasket together so you can compare the seal size when reassembling.
  3. 3 Note the drive pin orientation, then grip the brass insert of the old impeller with an impeller puller or two flat-blade screwdrivers and pull it straight off the shaft. Recover any broken vane pieces from the heat exchanger inlet before continuing.
  4. 4 Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.
  5. 5 Align the slot in the brass insert with the drive pin on the 12.7 mm pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all ten vanes lay over the same way.
  6. 6 Refit the cover plate with a serviceable gasket, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm steady water discharge and no leaks at the cover.

Note: Professional installation is recommended to ensure safety and optimal performance.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Start from the original impeller number, then count the vanes. If the old part is Jabsco 18673-0001, JMP 7071-01 or Northern Lights 25-12009 and it has ten blades on a 12.7 mm pin-drive hub, this impeller is the correct size. Perkins 24880194 appears on both 6-blade and 10-blade lists, so blade count decides it.

Is this the same as Jabsco 14673-0001 or Johnson 09-1026B? +

No. Those numbers (with JMP 7051-01) are the six-blade 51 × 22 mm pin-drive impeller used on Johnson F4 / F4B and many Volvo Penta D1 / D2 pumps. This listing is the ten-blade 18673-0001 / 7071-01. Same outside size, different vane count. They are not interchangeable.

What are the signs that my impeller needs replacing? +

The usual symptoms are a weak or intermittent stream of cooling water at the exhaust outlet, rising coolant or exhaust temperature at low speed, and a high-temperature alarm on a generator set. On inspection the vanes may be cracked, flattened, hardened or missing. Flexible impellers are a wear item, so many owners inspect annually and replace on a fixed service interval rather than waiting for failure.

Is this a kit or just the impeller? +

This listing is the impeller only. A gasket appears in the source photograph for identification and is not included. Jabsco 18673-0001-P and JMP 7071-01K are kit numbers that add cover seals and lubricant.

Is this an OEM or aftermarket part? +

This listing is an aftermarket replacement part and is not an OEM component. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost? +

We offer fast global shipping, typically 5–15 days worldwide, and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy? +

This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window for unused items in original condition; please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • The impeller is supplied on its own. Cover plate seals, gaskets and lubricant must be ordered separately if your service procedure requires them.
  • Count the vanes. Six-blade 14673-0001 / 673-0001 / 09-1026B / 7051-01 is a different part with the same outside size.
  • DJ 08-31-0601 on the source sheet is a 40 mm impeller, not this 51 mm size. Cummins 3866609 is a KTA19 pump assembly, not this impeller.
  • Never run the pump dry. Even a few seconds without water will damage the neoprene vanes.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Перевозки

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

О компании JLM Marine

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Search
Add to garage

Сопутствующие товары

Example product title
$26.40
$26.40
Example product title
$26.40
$26.40
Example product title
$26.40
$26.40
Example product title
$26.40
$26.40
Example product title
$26.40
$26.40
Example product title
$26.40
$26.40

Недавно просмотренные продукты