Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01

Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01

Vendor: JLM Marine
Availability: In Stock
Product Type: Flexible Rubber Impeller
$31.20
$31.20
Subtotal: $31.20

Бесплатная доставка

Бесплатная стандартная доставка для всех заказов весом до 1 кг.

Возврат без проблем

Узнать больше.
Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01

Flexible Rubber Water Pump Impeller 11979-0001 – 8 Blade Neoprene 65 mm Spline Drive – Fits JMP 7200-01

$31.20
Описание

How to Match This Part

This is a flexible rubber raw water pump impeller. It sits inside the pump housing behind the cover plate and is driven by a splined shaft. It replaces the primary original part number Jabsco 11979-0001, and is also supplied against JMP 7200-01, DJ 08-40-0801 and Yanmar 122610-42021.

Match this part by checking your engine in this order:
1. Original impeller part number (stamped on the old impeller or listed in the pump section of your parts catalog)
2. Blade count (this listing is 8 blades)
3. Drive type (this listing is a 12-spline hub, not a key drive)
4. Pump model (cast or labelled on the pump body — Jabsco 18930 / 18940 / 17200 family)

Identify it physically before ordering. This impeller has eight vanes moulded in black neoprene around a machined brass spline insert. JMP 7200-01 is 65 mm diameter, 37 mm width and 16 mm (5/8 in.) bore. Jabsco 11979-0001 is Profile M. It is not interchangeable with 12-blade 57 mm Jabsco 1210-0001 or 62.5 mm key-drive 18838-0001.

  • ✓ Primary OEM: Jabsco 11979-0001
  • ✓ Product form: 8-blade neoprene impeller, brass 12-spline insert, 37 mm width
  • ✓ Fitment: part number, then blade count, then drive type

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. Jabsco 11979-0001-P and JMP 7200-01K are kit numbers. This listing is the impeller only.

Type Brand Part Number Notes
OEM Jabsco Pump 11979-0001 Primary reference. Profile M. 11979-0001-P is the kit number
OEM JMP Pump 7200-01 Bare impeller. JMP 7200-01K is a kit
OEM DJ Pump 08-40-0801 8-blade spline equivalent
OEM Yanmar 122610-42021 JMP 7200-01 equivalent. Match this number; do not dump 3JH / 4JH families
Other brand Industry interchange K-113 Source-sheet other-brand number
Other brand Industry interchange 888-113 Source-sheet other-brand number for this SKU

Compatible Engine Models

Confirm the original impeller number and the 8-blade 12-spline hub. Do not assume every Yanmar inboard uses this part.

Brand Engine / Pump Model Original Part No. Notes
Jabsco 18930-0000 / 18930-0010 / 18930-0020, 18940-0010, 17200-0001 11979-0001 8-blade, 12-spline, 65 × 37 × 16 mm
Yanmar Engines whose parts list calls for 122610-42021 122610-42021 Match the original number. Do not dump 3JH / 4JH
Chrysler Marine LM318 / LM340 with Jabsco 18940-0010 pump 11979-0001 Confirm the pump model on the housing

Technical Specifications

Specification Value
Part type Flexible rubber impeller, raw water pump
Number of blades 8
Impeller diameter (A) 65 mm (2-9/16 in.)
Impeller width / depth (B) 37 mm (1-7/16 in.)
Shaft bore diameter (C) 16 mm (5/8 in.)
Insert / drive type Spline drive (12)
Insert material Machined brass
Vane material Neoprene rubber

Package Contents

This listing is for the impeller only, as shown in the product images. Please refer to the part number cross-reference table to confirm component details.

Cover plate gasket, O-ring and lubricant are not included. Jabsco 11979-0001-P and JMP 7200-01K add those service parts. If your service procedure calls for a new cover seal, order it separately against your pump model.

Installation Guide

  1. 1 Stop the engine, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.
  2. 2 Remove the cover plate screws and lift off the cover. Keep the screws and the old gasket together so you can compare the seal size when reassembling.
  3. 3 Note the spline orientation, then grip the brass insert and pull the old impeller straight off. Recover any broken vane pieces from the downstream cooling circuit before continuing.
  4. 4 Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.
  5. 5 Align the splines in the brass insert with the pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all eight vanes lay over the same way.
  6. 6 Refit the cover plate with a serviceable gasket, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm a solid stream of cooling water and no leaks at the cover.

Note: Professional installation is recommended to ensure safety and optimal performance.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Start from the original impeller number. If the old part is Jabsco 11979-0001, JMP 7200-01, DJ 08-40-0801 or Yanmar 122610-42021, and the brass hub is a 12-spline drive about 37 mm wide on a 65 mm 8-blade impeller, this part is the correct size.

Will this fit every Yanmar inboard? +

No. Only engines whose parts list calls for 122610-42021. Yanmar 3JH / 4JH cooling impellers are a different size. Match the original number and count eight blades.

Is this the same as 12-blade Jabsco 1210-0001? +

No. 1210-0001 is 12-blade, 57 mm diameter and 31.5 mm wide. This listing is 8-blade, 65 mm diameter and 37 mm wide.

What are the signs that my impeller needs replacing? +

The usual symptoms are a weak or intermittent stream of cooling water, rising engine temperature, and vanes that are cracked, flattened, hardened or missing on inspection. Flexible impellers are a wear item; inspect on a fixed service interval rather than waiting for failure.

Is this a kit or just the impeller? +

This listing is the impeller only. Jabsco 11979-0001-P and JMP 7200-01K are kit numbers that add a gasket, O-ring and lubricant.

Is this an OEM or aftermarket part? +

This listing is an aftermarket replacement part and is not an OEM component. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost? +

We offer fast global shipping, typically 5–15 days worldwide, and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy? +

This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window for unused items in original condition; please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • The impeller is supplied on its own. Cover seals and lubricant must be ordered separately if your service procedure requires them.
  • This is an 8-blade, 65 mm 12-spline impeller. It will not fit 12-blade 57 mm Jabsco 1210-0001 or 62.5 mm key-drive 18838-0001.
  • Never run the pump dry. Even a few seconds without water will damage the neoprene vanes.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Перевозки

Мы осуществляем доставку практически по любому адресу в мире, при этом для большинства регионов доступна бесплатная доставка.

Для наших типичных клиентов из США и Канады сроки доставки следующие:

  • Amazon FBA : заказы будут доставлены в течение 1–5 рабочих дней после размещения заказа (в определенные особые периоды, такие как крупные акции, Рождество и т. д., время доставки Amazon FBA может быть изменено).
  • Доставка со склада в США : заказы будут доставлены в течение 7 дней после размещения заказа.
  • Доставка со склада в Китае : заказы будут доставлены примерно через 12 дней после размещения заказа.

Когда вы размещаете заказ, мы оценим даты отправки и доставки для вас на основе доступности ваших товаров и выбранных вами вариантов доставки. В зависимости от выбранного вами поставщика услуг доставки, предполагаемые даты доставки могут отображаться на странице расценок на доставку.

Также обратите внимание, что стоимость доставки многих товаров, которые мы продаем, основана на весе. Вес любого такого товара можно найти на странице с его подробностями. Чтобы отразить политику транспортных компаний, с которыми мы работаем, все веса будут округлены до следующего целого фунта.

О компании JLM Marine

Основанная в 2002 году, компания JLM Marine зарекомендовала себя как специализированный производитель высококачественных морских деталей, базирующийся в Китае. Наша приверженность совершенству в производстве заслужила нам доверие ведущих мировых морских брендов.

Как прямой поставщик, мы обходим посредников, что позволяет нам предлагать конкурентоспособные цены без ущерба качеству. Такой подход не только поддерживает экономическую эффективность, но и гарантирует, что наши клиенты получают наилучшую ценность напрямую от источника.

Мы рады расширить свое присутствие через розничные каналы, предлагая наш опыт и приверженность качеству непосредственно владельцам и любителям лодок по всему миру.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Search
Add to garage

Сопутствующие товары

 
 
 
 
 
 

Недавно просмотренные продукты