{"product_id":"flexible-rubber-water-pump-impeller-09-842b","title":"Flexible Rubber Water Pump Impeller 09-842B – 12 Blade Neoprene Spline – Fits Johnson F98","description":"\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: linear-gradient(135deg, #f5f8fb 0%, #ffffff 100%); border: 2px solid #0b3a63; border-left: 5px solid #0b3a63; border-radius: 12px; box-shadow: 0 4px 12px rgba(11, 58, 99, 0.08);\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; padding: 0; font-size: 24px; line-height: 1.3; font-weight: 700; color: #132238;\"\u003eHow to Match This Part\u003c\/h2\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eThis is a flexible rubber raw water pump impeller. It sits inside the pump housing behind the cover plate and is driven by a splined shaft. It replaces the primary original part number \u003cstrong style=\"font-weight: 700; color: #132238;\"\u003eJohnson 09-842B\u003c\/strong\u003e for the Johnson F98 pump.\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n    \u003cstrong style=\"font-weight: 700; color: #132238;\"\u003eMatch this part by checking your engine in this order:\u003c\/strong\u003e\u003cbr\u003e\n    1. \u003cstrong\u003eOriginal impeller part number\u003c\/strong\u003e (stamped on the old impeller or listed in the pump section of your parts catalog)\u003cbr\u003e\n    2. \u003cstrong\u003eBlade count\u003c\/strong\u003e (this listing is 12 blades)\u003cbr\u003e\n    3. \u003cstrong\u003eDrive type\u003c\/strong\u003e (this listing is a spline hub, about 25.4 mm \/ 1 in bore)\u003cbr\u003e\n    4. \u003cstrong\u003eDiameter and width\u003c\/strong\u003e (this listing is 95 mm diameter and 180 mm wide, not F95 09-820B which is 130 mm wide)\n  \u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eIdentify it physically before ordering. Johnson 09-842B is a tall 12-blade neoprene impeller, 95 mm diameter and 180 mm wide, with a brass spline insert. Catalog photos of the service pack show an O-ring and lubricant; this listing is the impeller only. SPX Johnson charts do not list a Jabsco equivalent for the F98 impeller.\u003c\/p\u003e\n  \u003cul style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 12px; margin: 16px 0 0; padding: 0; list-style: none;\"\u003e\n    \u003cli style=\"margin: 0; padding: 14px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; font-size: 15px; line-height: 1.5;\"\u003e✓ Primary OEM: Johnson 09-842B\u003c\/li\u003e\n    \u003cli style=\"margin: 0; padding: 14px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; font-size: 15px; line-height: 1.5;\"\u003e✓ Product form: 12-blade neoprene impeller, brass spline insert, 95 × 180 mm\u003c\/li\u003e\n    \u003cli style=\"margin: 0; padding: 14px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; font-size: 15px; line-height: 1.5;\"\u003e✓ Fitment: part number, then 180 mm vs 130 mm F95 09-820B\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003ePart Number Cross-Reference\u003c\/h2\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eUse this table to confirm equivalent part numbers. Genuine Johnson service kits include an O-ring and glycerine. This listing is the impeller only.\u003c\/p\u003e\n  \u003cdiv style=\"margin: 16px 0; overflow-x: auto; border: 1px solid #e0e6ed; border-radius: 8px;\"\u003e\n    \u003ctable style=\"width: 100%; min-width: 600px; border-collapse: collapse; font-size: 15px;\"\u003e\n      \u003cthead\u003e\u003ctr style=\"background: #132238; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eType\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eBrand\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003ePart Number\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eOEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eJohnson Pump (SPX Flow)\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e09-842B\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003ePrimary reference. F98 pump, 12-blade neoprene, spline, 95 × 180 × 25.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f5f8fb;\"\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eOEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eJohnson Pump (SPX Flow)\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e09-842B\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eExcel also lists this number on a Jabsco row; SPX charts show no separate Jabsco equivalent for F98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eOther brand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eIndustry interchange\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e1251\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eSource-sheet other-brand number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eCompatible Engine Models\u003c\/h2\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eConfirm the original impeller number and measure 180 mm width on a 95 mm 12-blade spline impeller. Do not assume every Johnson F9 \/ F95 pump uses this impeller.\u003c\/p\u003e\n  \u003cdiv style=\"margin: 16px 0; overflow-x: auto; border: 1px solid #e0e6ed; border-radius: 8px;\"\u003e\n    \u003ctable style=\"width: 100%; min-width: 600px; border-collapse: collapse; font-size: 15px;\"\u003e\n      \u003cthead\u003e\u003ctr style=\"background: #132238; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eBrand\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eEngine \/ Pump Model\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eOriginal Part No.\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eJohnson Pump\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eF98 (pump model)\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e09-842B\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e12-blade neoprene, spline, 95 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdiv style=\"margin: 16px 0; overflow-x: auto; border: 1px solid #e0e6ed; border-radius: 8px;\"\u003e\n    \u003ctable style=\"width: 100%; min-width: 600px; border-collapse: collapse; font-size: 15px;\"\u003e\n      \u003cthead\u003e\u003ctr style=\"background: #132238; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; text-align: left; font-weight: 700; font-size: 14px; text-transform: uppercase; border-bottom: 2px solid #0b3a63;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003ePart type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eFlexible rubber impeller, raw water pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f5f8fb;\"\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eNumber of blades\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eImpeller diameter (A)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f5f8fb;\"\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eImpeller width \/ depth (B)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eShaft bore diameter (C)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e25.4 mm (1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f5f8fb;\"\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eInsert \/ drive type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eSpline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eInsert material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eMachined brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f5f8fb;\"\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003e\u003cstrong\u003eVane material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px 14px; border-bottom: 1px solid #e0e6ed;\"\u003eNeoprene rubber (cooling service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003ePackage Contents\u003c\/h2\u003e\n  \u003cp style=\"margin: 0 0 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eThis listing is for the impeller only. Product photos of a genuine-style pack show an O-ring and lubricant sachets; those extras are not included. Please refer to the part number cross-reference table to confirm component details.\u003c\/p\u003e\n  \u003cp style=\"margin: 0; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eCover gasket, O-ring and lubricant are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eInstallation Guide\u003c\/h2\u003e\n  \u003col style=\"margin: 0; padding: 0; list-style: none;\"\u003e\n    \u003cli style=\"position: relative; margin: 0 0 14px; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e1\u003c\/span\u003e\n      Stop the engine, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.\n    \u003c\/li\u003e\n    \u003cli style=\"position: relative; margin: 0 0 14px; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e2\u003c\/span\u003e\n      Remove the cover plate screws and lift off the cover. Keep the screws and the old gasket together so you can compare the seal size when reassembling.\n    \u003c\/li\u003e\n    \u003cli style=\"position: relative; margin: 0 0 14px; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e3\u003c\/span\u003e\n      Note the spline orientation, then grip the brass insert and pull the old impeller straight off. This impeller is 180 mm wide; recover any broken vane pieces from the downstream cooling circuit before continuing.\n    \u003c\/li\u003e\n    \u003cli style=\"position: relative; margin: 0 0 14px; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e4\u003c\/span\u003e\n      Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.\n    \u003c\/li\u003e\n    \u003cli style=\"position: relative; margin: 0 0 14px; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e5\u003c\/span\u003e\n      Align the spline insert with the pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all twelve vanes lay over the same way.\n    \u003c\/li\u003e\n    \u003cli style=\"position: relative; margin: 0; padding: 0 0 0 42px; min-height: 28px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n      \u003cspan style=\"position: absolute; left: 0; top: 0; width: 28px; height: 28px; background: #0b3a63; color: #ffffff; font-size: 14px; font-weight: 700; border-radius: 50%; display: inline-flex; align-items: center; justify-content: center;\"\u003e6\u003c\/span\u003e\n      Refit the cover plate with a serviceable gasket or O-ring, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm a solid stream of cooling water and no leaks at the cover.\n    \u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp style=\"margin: 12px 0 0; padding: 12px 14px; background: #f5f8fb; border-left: 3px solid #0b3a63; font-size: 14px; line-height: 1.5; color: #5c6b7a; border-radius: 4px;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional installation is recommended to ensure safety and optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      How do I confirm this fits my engine?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eStart from the original impeller number. If the old part is Johnson 09-842B for an F98 pump, and it is a 12-blade 95 mm impeller 180 mm wide on a spline hub, this listing is the correct size.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      Is this the same as 09-820B?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eNo. Johnson 09-820B is the F95 impeller, 95 mm diameter and 130 mm wide. This listing is the F98 impeller, 180 mm wide. Measure the old part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      The photo shows an O-ring and lubricant. Is this a kit?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eThis listing is the impeller only. The supplied photo is a genuine-style service pack. Excel kit contents are empty, so the O-ring and lubricant are not included.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      Is there a Jabsco number for this impeller?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eSPX Johnson charts list 09-842B for F98 with no Jabsco equivalent. Excel still prints 09-842B on a Jabsco row. Match Johnson 09-842B.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      Is this an OEM or aftermarket part?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eThis listing is an aftermarket replacement part and is not an OEM component. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0 0 12px; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      How fast do you ship and how much does it cost?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eWe offer fast global shipping, typically 5–15 days worldwide, and standard shipping is free. Expedited options are available at checkout depending on your location.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin: 0; padding: 0; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 8px; overflow: hidden;\"\u003e\n    \u003csummary style=\"display: block; padding: 14px 16px; font-size: 16px; font-weight: 700; color: #132238; cursor: pointer; list-style: none;\"\u003e\n      What is your warranty and return policy?\n      \u003cspan style=\"float: right; font-size: 20px; color: #0b3a63;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cp style=\"margin: 0 16px 14px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003eThis product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window for unused items in original condition; please see our policy page or reach out for instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0 0 24px; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eImportant Notes\u003c\/h2\u003e\n  \u003cul style=\"margin: 0; padding: 0 0 0 24px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003eVerify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.\u003c\/li\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003eThis product is an aftermarket replacement part and is not an OEM component.\u003c\/li\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003eThis listing is the 180 mm F98 impeller. It will not fit F95 09-820B, which is 130 mm wide on the same 95 mm diameter.\u003c\/li\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003eThe impeller is supplied on its own. Cover seals and lubricant must be ordered separately if your service procedure requires them.\u003c\/li\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003eNever run the pump dry. Even a few seconds without water will damage the neoprene vanes.\u003c\/li\u003e\n    \u003cli style=\"margin: 0;\"\u003eProfessional installation is recommended to ensure safety and optimal performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin: 0; padding: 24px; background: #ffffff; border: 1px solid #e0e6ed; border-radius: 12px;\"\u003e\n  \u003ch2 style=\"margin: 0 0 16px; font-size: 24px; font-weight: 700; color: #132238;\"\u003eWhy Choose JLM MARINE?\u003c\/h2\u003e\n  \u003cul style=\"margin: 0; padding: 0 0 0 24px; font-size: 16px; line-height: 1.6; color: #132238;\"\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003e\n\u003cstrong style=\"font-weight: 700;\"\u003eQuality Assured:\u003c\/strong\u003e As a trusted manufacturer for over 20 years, we supply top marine brands globally.\u003c\/li\u003e\n    \u003cli style=\"margin: 0 0 8px;\"\u003e\n\u003cstrong style=\"font-weight: 700;\"\u003eFast Global Shipping:\u003c\/strong\u003e Free delivery worldwide in 5–15 days.\u003c\/li\u003e\n    \u003cli style=\"margin: 0;\"\u003e\n\u003cstrong style=\"font-weight: 700;\"\u003eDirect from Manufacturer:\u003c\/strong\u003e Competitive pricing without compromising quality.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"JLM Marine","offers":[{"title":"Default Title","offer_id":54419332333881,"sku":"23FI448","price":326.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/0433\/6697\/files\/2026-09-02_122433.png?v=1788354902","url":"https:\/\/jlmmarine.com\/products\/flexible-rubber-water-pump-impeller-09-842b","provider":"JLM Marine Boat Parts Limited","version":"1.0","type":"link"}